Nanoelectronics: Materials, Devices and Applications

A special issue of Nanomaterials (ISSN 2079-4991). This special issue belongs to the section "Nanoelectronics, Nanosensors and Devices".

Deadline for manuscript submissions: closed (15 March 2024) | Viewed by 41199

Special Issue Editor


E-Mail Website
Guest Editor
Laboratory of Dielectric Functional Materials, School of Materials Science & Engineering, Anhui University, Hefei 230601, China
Interests: dielectrics; ferroelectrics; physics; materials and their applications
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Nanoelectronics refers to the electronics field of device preparation, research and application based on nanoscale materials. Due to quantum size effect, the electrons in nanomaterials and devices exhibit many novel characteristics, attracting significant attention from researchers in various fields. It is widely believed that nanoelectronics will replace microelectronics as the main body of information technology in the coming decades, which will create a profound impact on human life.

This Special Issue on "Nanoelectronics: Materials, Devices and Applications” aims to collect the most recent developments in functional nanomaterials and their applications in different fields, including—but not limited to—their applications in mechanics, electricity, magnetism, optics, catalysis, sensors, information, energy harvesting and conversion, etc. Papers detailing a fundamental understanding of the properties of the above field, as demonstrated by nanoscale materials, are also welcome.

Prof. Dr. Chunchang Wang
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Nanomaterials is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2900 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • design, synthesis, and fabrication of nanoelectronic materials
  • new theory and modeling of nanoelectronic materials
  • electronic, optical, magnetic, and other properties of nanoelectronic materials
  • applications of nanoelectronic materials

Benefits of Publishing in a Special Issue

  • Ease of navigation: Grouping papers by topic helps scholars navigate broad scope journals more efficiently.
  • Greater discoverability: Special Issues support the reach and impact of scientific research. Articles in Special Issues are more discoverable and cited more frequently.
  • Expansion of research network: Special Issues facilitate connections among authors, fostering scientific collaborations.
  • External promotion: Articles in Special Issues are often promoted through the journal's social media, increasing their visibility.
  • e-Book format: Special Issues with more than 10 articles can be published as dedicated e-books, ensuring wide and rapid dissemination.

Further information on MDPI's Special Issue polices can be found here.

Published Papers (19 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Editorial

Jump to: Research, Review

4 pages, 168 KiB  
Editorial
Nanoelectronics: Materials, Devices and Applications
by Chunchang Wang
Nanomaterials 2024, 14(21), 1716; https://doi.org/10.3390/nano14211716 - 27 Oct 2024
Viewed by 401
Abstract
The semiconductor industry is facing concerns regarding the saturation of Moore’s Law [...] Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)

Research

Jump to: Editorial, Review

11 pages, 1432 KiB  
Article
Effects of Composition and Polymerization Conditions on the Electro-Optic Performance of Liquid Crystal–Polymer Composites Doped with Ferroelectric Nanoparticles
by Gaby Nordendorf, Gisela Jünnemann-Held, Alexander Lorenz and Heinz-Siegfried Kitzerow
Nanomaterials 2024, 14(11), 961; https://doi.org/10.3390/nano14110961 - 31 May 2024
Viewed by 660
Abstract
The presence of a polymer network and/or the addition of ferroelectric nanoparticles to a nematic liquid crystal are found to lower transition temperatures and birefringence, which indicates reduced orientational order. In addition, the electro-optic switching voltage is considerably increased when a polymer network [...] Read more.
The presence of a polymer network and/or the addition of ferroelectric nanoparticles to a nematic liquid crystal are found to lower transition temperatures and birefringence, which indicates reduced orientational order. In addition, the electro-optic switching voltage is considerably increased when a polymer network is formed by in situ polymerization in the nematic state. However, the resulting polymer network liquid crystal switches at similar voltages as the neat liquid crystal when polymerization is performed at an elevated temperature in the isotropic state. When nanoparticle dispersions are polymerized at an applied DC voltage, the transition temperatures and switching voltages are reduced, yet they are larger than those observed for polymer network liquid crystals without nanoparticles polymerized in the isotropic phase. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

12 pages, 3882 KiB  
Article
The Enhanced Performance of Oxide Thin-Film Transistors Fabricated by a Two-Step Deposition Pressure Process
by Mingjie Zhao, Jiahao Yan, Yaotian Wang, Qizhen Chen, Rongjun Cao, Hua Xu, Dong-Sing Wuu, Wan-Yu Wu, Feng-Min Lai, Shui-Yang Lien and Wenzhang Zhu
Nanomaterials 2024, 14(8), 690; https://doi.org/10.3390/nano14080690 - 17 Apr 2024
Cited by 1 | Viewed by 1123
Abstract
It is usually difficult to realize high mobility together with a low threshold voltage and good stability for amorphous oxide thin-film transistors (TFTs). In addition, a low fabrication temperature is preferred in terms of enhancing compatibility with the back end of line of [...] Read more.
It is usually difficult to realize high mobility together with a low threshold voltage and good stability for amorphous oxide thin-film transistors (TFTs). In addition, a low fabrication temperature is preferred in terms of enhancing compatibility with the back end of line of the device. In this study, α-IGZO TFTs were prepared by high-power impulse magnetron sputtering (HiPIMS) at room temperature. The channel was prepared under a two-step deposition pressure process to modulate its electrical properties. X-ray photoelectron spectra revealed that the front-channel has a lower Ga content and a higher oxygen vacancy concentration than the back-channel. This process has the advantage of balancing high mobility and a low threshold voltage of the TFT when compared with a conventional homogeneous channel. It also has a simpler fabrication process than that of a dual active layer comprising heterogeneous materials. The HiPIMS process has the advantage of being a low temperature process for oxide TFTs. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

11 pages, 4030 KiB  
Article
Non-Volatile Memory Based on ZnO Thin-Film Transistor with Self-Assembled Au Nanocrystals
by Hui Xie, Hao Wu and Chang Liu
Nanomaterials 2024, 14(8), 678; https://doi.org/10.3390/nano14080678 - 14 Apr 2024
Viewed by 1593
Abstract
Non-volatile memory based on thin-film transistor is crucial for system-on-panel and flexible electronic systems. Achieving high-performance and reliable thin-film transistor (TFT) memory still remains challenging. Here, for the first time, we present a ZnO TFT memory utilizing self-assembled Au nanocrystals with a low [...] Read more.
Non-volatile memory based on thin-film transistor is crucial for system-on-panel and flexible electronic systems. Achieving high-performance and reliable thin-film transistor (TFT) memory still remains challenging. Here, for the first time, we present a ZnO TFT memory utilizing self-assembled Au nanocrystals with a low thermal budget, exhibiting excellent memory performance, including a program/erase window of 9.8 V, 29% charge loss extrapolated to 10 years, and remarkable endurance characteristics. Moreover, the memory exhibits favorable on-state characteristics with mobility, subthreshold swing, and current on–off ratio of 17.6 cm2V−1s−1, 0.71 V/dec, and 107, respectively. Our study shows that the fabricated TFT memory has great potential for practical applications. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

11 pages, 2842 KiB  
Article
Fish Scale for Wearable, Self-Powered TENG
by Liwei Zhao, Jin Han, Xing Zhang and Chunchang Wang
Nanomaterials 2024, 14(5), 463; https://doi.org/10.3390/nano14050463 - 3 Mar 2024
Cited by 4 | Viewed by 3876
Abstract
Flexible and wearable devices are attracting more and more attention. Herein, we propose a self-powered triboelectric nanogenerator based on the triboelectric effect of fish scales. As the pressure on the nanogenerator increases, the output voltage of the triboelectric nanogenerator increases. The nanogenerator can [...] Read more.
Flexible and wearable devices are attracting more and more attention. Herein, we propose a self-powered triboelectric nanogenerator based on the triboelectric effect of fish scales. As the pressure on the nanogenerator increases, the output voltage of the triboelectric nanogenerator increases. The nanogenerator can output a voltage of 7.4 V and a short-circuit current of 0.18 μA under a pressure of 50 N. The triboelectric effect of fish scales was argued to be related to the lamellar structure composed of collagen fiber bundles. The nanogenerator prepared by fish scales can sensitively perceive human activities such as walking, finger tapping, and elbow bending. Moreover, fish scales are a biomass material with good biocompatibility with the body. The fish-scale nanogenerator is a kind of flexible, wearable, and self-powered triboelectric nanogenerator showing great prospects in healthcare and body information monitoring. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

13 pages, 3024 KiB  
Article
Self-Powered Dual-Band Electrochromic Supercapacitor Devices for Smart Window Based on Ternary Dielectric Triboelectric Nanogenerator
by Tianxiang Zheng, Haonan Zhang, Chen Chen, Xinbo Tu, Lin Fang, Mingjie Zhang, Wen He and Peihong Wang
Nanomaterials 2024, 14(2), 229; https://doi.org/10.3390/nano14020229 - 20 Jan 2024
Cited by 3 | Viewed by 1614
Abstract
A dual-band electrochromic supercapacitor device (DESCD) can be driven by an external power supply to modulate solar radiation, which is a promising energy-saving strategy and has broad application prospects in smart windows. However, traditional power supplies, such as batteries, supercapacitors, etc., usually face [...] Read more.
A dual-band electrochromic supercapacitor device (DESCD) can be driven by an external power supply to modulate solar radiation, which is a promising energy-saving strategy and has broad application prospects in smart windows. However, traditional power supplies, such as batteries, supercapacitors, etc., usually face limited lifetimes and potential environmental issues. Hence, we propose a self-powered DESCD based on TiO2/WO3 dual-band electrochromic material and a ternary dielectric rotating triboelectric nanogenerator (TDR-TENG). The TDR-TENG can convert mechanical energy from the environment into electrical energy to obtain a high output of 840 V, 23.9 µA, and 327 nC. The as-prepared TDR-TENG can drive the TiO2/WO3 film to store energy with a high dual-band modulation amplitude of 41.6% in the visible (VIS) region and 84% in the near-infrared (NIR) region, decreasing the indoor–outdoor light–heat interaction and thereby reducing the building energy consumption. The self-powered DESCD demonstrated in this study has multiple functions of energy harvesting, energy storage, and energy saving, providing a promising strategy for the development of self-powered smart windows. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

15 pages, 3779 KiB  
Communication
Interface Trap Effect on the n-Channel GaN Schottky Barrier-Metal–Oxide Semiconductor Field-Effect Transistor for Ultraviolet Optoelectronic Integration
by Byeong-Jun Park, Han-Sol Kim and Sung-Ho Hahm
Nanomaterials 2024, 14(1), 59; https://doi.org/10.3390/nano14010059 - 25 Dec 2023
Viewed by 1301
Abstract
Ultraviolet (UV) photodetectors are key devices required in the industrial, military, space, environmental, and biological fields. The Schottky barrier (SB)-MOSFET, with its high hole and electron barrier, and given its extremely low dark current, has broad development prospects in the optoelectronics field. We [...] Read more.
Ultraviolet (UV) photodetectors are key devices required in the industrial, military, space, environmental, and biological fields. The Schottky barrier (SB)-MOSFET, with its high hole and electron barrier, and given its extremely low dark current, has broad development prospects in the optoelectronics field. We analyze the effects of trap states on the output characteristics of an inversion mode n-channel GaN SB-MOSFET using TCAD simulations. At the oxide/GaN interface below the gate, it was demonstrated that shallow donor-like traps were responsible for degrading the subthreshold swing (SS) and off-state current density (Ioff), while deep donor-like traps below the Fermi energy level were insignificant. In addition, shallow acceptor-like traps shifted the threshold voltage (Vt) positively and deteriorated the SS and on-state current density (Ion), while deep acceptor-like traps acted on a fixed charge. The output characteristics of the GaN SB-MOSFET were related to the resistive GaN path and the tunneling rate due to the traps at the metal (source, drain)/GaN interface. For the UV responses, the main mechanism for the negative Vt shift and the increases in the Ion and spectral responsivity was related to the photo-gating effect caused by light-generated holes trapped in the shallow trap states. These results will provide insights for UV detection technology and for a high-performance monolithic integration of the GaN SB-MOSFET. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

11 pages, 1962 KiB  
Article
Visible-Light-Driven Semiconductor–Metal Transition in Electron Gas at the (100) Surface of KTaO3
by Xiaochen Tian, Bocheng Li, Hu Sun, Yucheng Jiang, Run Zhao, Meng Zhao, Ju Gao, Jie Xing, Jie Qiu and Guozhen Liu
Nanomaterials 2023, 13(23), 3055; https://doi.org/10.3390/nano13233055 - 30 Nov 2023
Viewed by 1187
Abstract
Two-dimensional electron gas (2DEG) at the (100) KTaO3(KTO) surface and interfaces has attracted extensive interest because of its abundant physical properties. Here, light illumination-induced semiconductor–metal transition in the 2DEG at the KTO surface was investigated. 2DEG was formed at the surface [...] Read more.
Two-dimensional electron gas (2DEG) at the (100) KTaO3(KTO) surface and interfaces has attracted extensive interest because of its abundant physical properties. Here, light illumination-induced semiconductor–metal transition in the 2DEG at the KTO surface was investigated. 2DEG was formed at the surface of KTO by argon ion bombardment. The 2DEG prepared with a shorter bombardment time (300 s) exhibits semiconducting behavior in the range of 20~300 K in the dark. However, it shows a different resistance behavior, namely, a metallic state above ~55 K and a semiconducting state below ~55 K when exposed to visible light (405 nm) with a giant conductivity increase of about eight orders of magnitude at 20 K. The suppression of the semiconducting behavior is found to be more pronounced with increasing light power. After removing the illumination, the resistance cannot recover quickly, exhibiting persistent photoconductivity. More interestingly, the photoresponse of the 2DEG below 50 K was almost independent of the laser wavelength, although the photon energy is lower than the band gap of KTO. The present results provide experimental support for tuning oxide 2DEG by photoexcitation, suggesting promising applications of KTO-based 2DEG in future electronic and optoelectronic devices. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

12 pages, 3275 KiB  
Article
Super-High-Frequency Bulk Acoustic Resonators Based on Aluminum Scandium Nitride for Wideband Applications
by Wentong Dou, Congquan Zhou, Ruidong Qin, Yumeng Yang, Huihui Guo, Zhiqiang Mu and Wenjie Yu
Nanomaterials 2023, 13(20), 2737; https://doi.org/10.3390/nano13202737 - 10 Oct 2023
Cited by 3 | Viewed by 1663
Abstract
Despite the dominance of bulk acoustic wave (BAW) filters in the high-frequency market due to their superior performance and compatible integration process, the advent of the 5G era brings up new challenges to meet the ever-growing demands on high-frequency and large bandwidth. Al [...] Read more.
Despite the dominance of bulk acoustic wave (BAW) filters in the high-frequency market due to their superior performance and compatible integration process, the advent of the 5G era brings up new challenges to meet the ever-growing demands on high-frequency and large bandwidth. Al1-xScxN piezoelectric films with high Sc concentration are particularly desirable to achieve an increased electromechanical coupling (Kt2) for BAW resonators and also a larger bandwidth for filters. In this paper, we designed and fabricated the Al1-xScxN-based BAW resonators with Sc concentrations as high as 30%. The symmetry of the resonance region, border frame structure and thickness ratio of the piezoelectric stack are thoroughly examined for lateral modes suppression and resonant performance optimization. Benefiting from the 30% Sc doping, the fabricated BAW resonators demonstrate a large effective electromechanical coupling (Keff2) of 17.8% at 4.75 GHz parallel resonant frequency. Moreover, the temperature coefficient of frequency (TCF) of the device is obtained as −22.9 ppm/°C, indicating reasonable temperature stability. Our results show that BAW resonators based on highly doped Al1-xScxN piezoelectric film have great potential for high-frequency and large bandwidth applications. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

8 pages, 2893 KiB  
Communication
Thermal, Mechanical, and Electrical Stability of Cu Films in an Integration Process with Photosensitive Polyimide (PSPI) Films
by Ruhan E. Ustad, Vijay D. Chavan, Honggyun Kim, Min-ho Shin, Sung-Kyu Kim, Kyeong-Keun Choi and Deok-kee Kim
Nanomaterials 2023, 13(19), 2642; https://doi.org/10.3390/nano13192642 - 26 Sep 2023
Cited by 3 | Viewed by 1731
Abstract
Photosensitive polyimides (PSPIs) have been widely developed in microelectronics, which is due to their excellent thermal properties and reasonable dielectric properties and can be directly patterned to simplify the processing steps. In this study, 3 μm~7 μm thick PSPI films were deposited on [...] Read more.
Photosensitive polyimides (PSPIs) have been widely developed in microelectronics, which is due to their excellent thermal properties and reasonable dielectric properties and can be directly patterned to simplify the processing steps. In this study, 3 μm~7 μm thick PSPI films were deposited on different substrates, including Si, 50 nm SiN, 50 nm SiO2, 100 nm Cu, and 100 nm Al, for the optimization of the process of integration with Cu films. In situ temperature-dependent resistance measurements were conducted by using a four-point probe system to study the changes in resistance of the 70 nm thick Cu films on different dielectrics with thick diffusion films of 30 nm Mn, Co, and W films in a N2 ambient. The lowest possible change in thickness due to annealing at the higher temperature ranges of 325 °C to 375 °C is displayed, which suggests the high stability of PSPI. The PSPI films show good adhesion with each Cu diffusion barrier up to 350 °C, and we believe that this will be helpful for new packaging applications, such as a 3D IC with a Cu interconnect. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

12 pages, 1985 KiB  
Article
Photoconduction Properties in Tungsten Disulfide Nanostructures
by Hemanth Kumar Bangolla, Yueh-Chien Lee, Wei-Chu Shen, Rajesh Kumar Ulaganathan, Raman Sankar, He-Yun Du and Ruei-San Chen
Nanomaterials 2023, 13(15), 2190; https://doi.org/10.3390/nano13152190 - 27 Jul 2023
Viewed by 1320
Abstract
We reported the photoconduction properties of tungsten disulfide (WS2) nanoflakes obtained by the mechanical exfoliation method. The photocurrent measurements were carried out using a 532 nm laser source with different illumination powers. The results reveal a linear dependence of photocurrent on [...] Read more.
We reported the photoconduction properties of tungsten disulfide (WS2) nanoflakes obtained by the mechanical exfoliation method. The photocurrent measurements were carried out using a 532 nm laser source with different illumination powers. The results reveal a linear dependence of photocurrent on the excitation power, and the photoresponsivity shows an independent behavior at higher light intensities (400–4000 Wm−2). The WS2 photodetector exhibits superior performance with responsivity in the range of 36–73 AW−1 and a normalized gain in the range of 3.5–7.3 10−6 cm2V−1 at a lower bias voltage of 1 V. The admirable photoresponse at different light intensities suggests that WS2 nanostructures are of potential as a building block for novel optoelectronic device applications. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

16 pages, 5351 KiB  
Article
Interface Optimization and Performance Enhancement of Er2O3-Based MOS Devices by ALD-Derived Al2O3 Passivation Layers and Annealing Treatment
by Qiuju Wu, Qing Yu, Gang He, Wenhao Wang, Jinyu Lu, Bo Yao, Shiyan Liu and Zebo Fang
Nanomaterials 2023, 13(11), 1740; https://doi.org/10.3390/nano13111740 - 26 May 2023
Cited by 1 | Viewed by 1468
Abstract
In this paper, the effect of atomic layer deposition (ALD)-derived Al2O3 passivation layers and annealing temperatures on the interfacial chemistry and transport properties of sputtering-deposited Er2O3 high-k gate dielectrics on Si substrate has been investigated. X-ray photoelectron [...] Read more.
In this paper, the effect of atomic layer deposition (ALD)-derived Al2O3 passivation layers and annealing temperatures on the interfacial chemistry and transport properties of sputtering-deposited Er2O3 high-k gate dielectrics on Si substrate has been investigated. X-ray photoelectron spectroscopy (XPS) analyses have showed that the ALD-derived Al2O3 passivation layer remarkably prevents the formation of the low-k hydroxides generated by moisture absorption of the gate oxide and greatly optimizes the gate dielectric properties. Electrical performance measurements of metal oxide semiconductor (MOS) capacitors with different gate stack order have revealed that the lowest leakage current density of 4.57 × 10−9 A/cm2 and the smallest interfacial density of states (Dit) of 2.38 × 1012 cm−2 eV−1 have been achieved in the Al2O3/Er2O3/Si MOS capacitor, which can be attributed to the optimized interface chemistry. Further electrical measurements of annealed Al2O3/Er2O3/Si gate stacks at 450 °C have demonstrated superior dielectric properties with a leakage current density of 1.38 × 10−9 A/cm2. At the same, the leakage current conduction mechanism of MOS devices under various stack structures is systematically investigated. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

13 pages, 5739 KiB  
Article
Humidity Sensing Properties of (In+Nb) Doped HfO2 Ceramics
by Jiahao Yao, Jingsong Wang, Wenjun Cao, Li Li, Mingxiang Luo and Chunchang Wang
Nanomaterials 2023, 13(5), 951; https://doi.org/10.3390/nano13050951 - 6 Mar 2023
Cited by 7 | Viewed by 1799
Abstract
(In+Nb) co-doped HfO2 ceramics, Hf1-x(In0.5Nb0.5)xO2 (x = 0, 0.005, 0.05, and 0.1), were prepared via a solid-state reaction method. Dielectric measurements reveal that the environmental moisture has an obvious influence on [...] Read more.
(In+Nb) co-doped HfO2 ceramics, Hf1-x(In0.5Nb0.5)xO2 (x = 0, 0.005, 0.05, and 0.1), were prepared via a solid-state reaction method. Dielectric measurements reveal that the environmental moisture has an obvious influence on the dielectric properties of the samples. The best humidity response was found in a sample with the doping level of x = 0.005. This sample was therefore selected as a model sample to further investigate its humidity properties. In doing so, nanosized particles of Hf0.995(In0.5Nb0.5)0.005O2 were fabricated via a hydrothermal method and the humidity sensing properties of this material were studied in the relative humidity range of 11–94% based on impedance sensor. Our results show that the material exhibits a large impedance change of nearly four orders of magnitude over the tested humidity range. It was argued that the humidity-sensing properties were related to the defects created by doping, which improves the adsorption capacity for water molecules. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

14 pages, 15847 KiB  
Article
Enhanced Piezoelectricity and Thermal Stability of Electrostrain Performance in BiFeO3-Based Lead-Free Ceramics
by Hongwei Shi, Kai Li, Feng Li, Jianxing Ma, Yubing Tu, Mingsheng Long, Yilin Lu, Weiping Gong, Chunchang Wang and Lei Shan
Nanomaterials 2023, 13(5), 942; https://doi.org/10.3390/nano13050942 - 5 Mar 2023
Cited by 5 | Viewed by 1889
Abstract
BiFeO3–based ceramics possess an advantage over large spontaneous polarization and high Curie temperature, and are thus widely explored in the field of high–temperature lead–free piezoelectrics and actuators. However, poor piezoelectricity/resistivity and thermal stability of electrostrain make them less competitive. To address [...] Read more.
BiFeO3–based ceramics possess an advantage over large spontaneous polarization and high Curie temperature, and are thus widely explored in the field of high–temperature lead–free piezoelectrics and actuators. However, poor piezoelectricity/resistivity and thermal stability of electrostrain make them less competitive. To address this problem, (1 − x) (0.65BiFeO3–0.35BaTiO3)–xLa0.5Na0.5TiO3 (BF–BT–xLNT) systems are designed in this work. It is found that piezoelectricity is significantly improved with LNT addition, which is contributed by the phase boundary effect of rhombohedral and pseudocubic phase coexistence. The small–signal and large–signal piezoelectric coefficient (d33 and d33*) peaks at x = 0.02 with 97 pC/N and 303 pm/V, respectively. The relaxor property and resistivity are enhanced as well. This is verified by Rietveld refinement, dielectric/impedance spectroscopy and piezoelectric force microscopy (PFM) technique. Interestingly, a good thermal stability of electrostrain is obtained at x = 0.04 composition with fluctuation η = 31% (Smax'SRTSRT×100%), in a wide temperature range of 25–180 °C, which is considered as a compromise of negative temperature dependent electrostrain for relaxors and the positive one for ferroelectric matrix. This work provides an implication for designing high–temperature piezoelectrics and stable electrostrain materials. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

13 pages, 3359 KiB  
Article
All-Water-Driven High-k HfO2 Gate Dielectrics and Applications in Thin Film Transistors
by Fakhari Alam, Gang He, Jin Yan and Wenhao Wang
Nanomaterials 2023, 13(4), 694; https://doi.org/10.3390/nano13040694 - 10 Feb 2023
Cited by 5 | Viewed by 1960
Abstract
In this article, we used a simple, non-toxic, environmentally friendly, water-driven route to fabricate the gate dielectric on the Si substrate and successfully integrate the In2O3/HfO2 thin film transistor (TFT). All the electrical properties of In2O [...] Read more.
In this article, we used a simple, non-toxic, environmentally friendly, water-driven route to fabricate the gate dielectric on the Si substrate and successfully integrate the In2O3/HfO2 thin film transistor (TFT). All the electrical properties of In2O3 based on HfO2 were systematically analyzed. The In2O3/HfO2 device exhibits the best electrical performance at an optimized annealing temperature of 500 °C, including a high µFE of 9 cm2 V−1 s−1, a high ION/IOFF of 105, a low threshold voltage of 1.1 V, and a low sub-threshold of 0.31 V dec−1. Finally, test the stability of the bias under positive bias stress (PBS) and negative bias stress (NBS) with threshold shifts (VTH) of 0.35 and 0.13 V while these optimized properties are achieved at a small operating voltage of 2 V. All experimental results demonstrate the potential application of aqueous solution technology for future low-cost, energy-efficient, large-scale, and high-performance electronics. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

15 pages, 5464 KiB  
Article
α-Fe2O3 Nanoparticles Aided-Dual Conversion for Self-Powered Bio-Based Photodetector
by Ishita Chakraborty, Sz-Nian Lai, Jyh-Ming Wu and Chao-Sung Lai
Nanomaterials 2022, 12(7), 1147; https://doi.org/10.3390/nano12071147 - 30 Mar 2022
Cited by 6 | Viewed by 2268
Abstract
Eco-friendly energy harvesting from the surrounding environment has been triggered extensive researching enthusiasm due to the threat of global energy crisis and environmental pollutions. By the conversion of mechanical energy that is omnipresent in our environment into electrical energy, triboelectric nanogenerator (TENG) can [...] Read more.
Eco-friendly energy harvesting from the surrounding environment has been triggered extensive researching enthusiasm due to the threat of global energy crisis and environmental pollutions. By the conversion of mechanical energy that is omnipresent in our environment into electrical energy, triboelectric nanogenerator (TENG) can potentially power up small electronic devices, serves as a self-powered detectors and predominantly, it can minimize the energy crisis by credibly saving the traditional non-renewable energy. In this study, we present a novel bio-based TENG comprising PDMS/α-Fe2O3 nanocomposite film and a processed human hair-based film, that harvests the vibrating energy and solar energy simultaneously by the integration of triboelectric technology and photoelectric conversion techniques. Upon illumination, the output voltage and current signals rapidly increased by 1.4 times approximately, compared to the dark state. Experimental results reveal that the photo-induced enhancement appears due to the effective charge separation depending on the photosensitivity of the hematite nanoparticles (α-Fe2O3 nanoparticles) over the near ultraviolet (UV), visible and near infrared (IR) regions. Our work provides a new approach towards the self-powered photo-detection, while developing a propitious green energy resource for the circular bio-economy. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Graphical abstract

Review

Jump to: Editorial, Research

14 pages, 2592 KiB  
Review
Recent Advances in the Photonic Curing of the Hole Transport Layer, the Electron Transport Layer, and the Perovskite Layers to Improve the Performance of Perovskite Solar Cells
by Moulay Ahmed Slimani, Sylvain G. Cloutier and Ricardo Izquierdo
Nanomaterials 2024, 14(10), 886; https://doi.org/10.3390/nano14100886 - 19 May 2024
Viewed by 1260
Abstract
Perovskite solar cells (PSCs) have attracted increasing research interest, but their performance depends on both the choice of materials and the process used. The materials can typically be treated in solution, which makes them well suited for roll-to-roll processing methods, but their deposition [...] Read more.
Perovskite solar cells (PSCs) have attracted increasing research interest, but their performance depends on both the choice of materials and the process used. The materials can typically be treated in solution, which makes them well suited for roll-to-roll processing methods, but their deposition under ambient conditions requires overcoming some challenges to improve stability and efficiency. In this review, we highlight the latest advancements in photonic curing (PC) for perovskite materials, as well as for hole transport layer (HTL) and electron transport layer (ETL) materials. We present how PC parameters can be used to control the optical, electrical, morphological, and structural properties of perovskite HTL and ETL layers. Emphasizing the significance of these advancements for perovskite solar cells could further highlight the importance of this research and underline its essential role in creating more efficient and sustainable solar technology. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

31 pages, 5961 KiB  
Review
Smart Triboelectric Nanogenerators Based on Stimulus-Response Materials: From Intelligent Applications to Self-Powered Systems
by Xueqing Wang, Qinghao Qin, Yin Lu, Yajun Mi, Jiajing Meng, Zequan Zhao, Han Wu, Xia Cao and Ning Wang
Nanomaterials 2023, 13(8), 1316; https://doi.org/10.3390/nano13081316 - 8 Apr 2023
Cited by 11 | Viewed by 3729
Abstract
Smart responsive materials can react to external stimuli via a reversible mechanism and can be directly combined with a triboelectric nanogenerator (TENG) to deliver various intelligent applications, such as sensors, actuators, robots, artificial muscles, and controlled drug delivery. Not only that, mechanical energy [...] Read more.
Smart responsive materials can react to external stimuli via a reversible mechanism and can be directly combined with a triboelectric nanogenerator (TENG) to deliver various intelligent applications, such as sensors, actuators, robots, artificial muscles, and controlled drug delivery. Not only that, mechanical energy in the reversible response of innovative materials can be scavenged and transformed into decipherable electrical signals. Because of the high dependence of amplitude and frequency on environmental stimuli, self-powered intelligent systems may be thus built and present an immediate response to stress, electrical current, temperature, magnetic field, or even chemical compounds. This review summarizes the recent research progress of smart TENGs based on stimulus-response materials. After briefly introducing the working principle of TENG, we discuss the implementation of smart materials in TENGs with a classification of several sub-groups: shape-memory alloy, piezoelectric materials, magneto-rheological, and electro-rheological materials. While we focus on their design strategy and function collaboration, applications in robots, clinical treatment, and sensors are described in detail to show the versatility and promising future of smart TNEGs. In the end, challenges and outlooks in this field are highlighted, with an aim to promote the integration of varied advanced intelligent technologies into compact, diverse functional packages in a self-powered mode. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

30 pages, 4783 KiB  
Review
Human Body–Electrode Interfaces for Wide-Frequency Sensing and Communication: A Review
by Kurian Polachan, Baibhab Chatterjee, Scott Weigand and Shreyas Sen
Nanomaterials 2021, 11(8), 2152; https://doi.org/10.3390/nano11082152 - 23 Aug 2021
Cited by 13 | Viewed by 9041
Abstract
Several on-body sensing and communication applications use electrodes in contact with the human body. Body–electrode interfaces in these cases act as a transducer, converting ionic current in the body to electronic current in the sensing and communication circuits and vice versa. An ideal [...] Read more.
Several on-body sensing and communication applications use electrodes in contact with the human body. Body–electrode interfaces in these cases act as a transducer, converting ionic current in the body to electronic current in the sensing and communication circuits and vice versa. An ideal body–electrode interface should have the characteristics of an electrical short, i.e., the transfer of ionic currents and electronic currents across the interface should happen without any hindrance. However, practical body–electrode interfaces often have definite impedances and potentials that hinder the free flow of currents, affecting the application’s performance. Minimizing the impact of body–electrode interfaces on the application’s performance requires one to understand the physics of such interfaces, how it distorts the signals passing through it, and how the interface-induced signal degradations affect the applications. Our work deals with reviewing these elements in the context of biopotential sensing and human body communication. Full article
(This article belongs to the Special Issue Nanoelectronics: Materials, Devices and Applications)
Show Figures

Figure 1

Back to TopTop