Materials

Deformation and Energy Absorption of Auxetic Materials and Structures

edited by Julian Plewa

submission deadline 20 Jul 2026 | Viewed by 34 | Submission Open

Keywords: real metamaterials with auxetic properties; spatial auxetic structures; functional auxetic metamaterials; auxetic metamaterials under the action of magnetic; electric; thermal; acoustic and optical stimuli; cracks of auxetic structures under compression and tension; auxetic nano-metamaterials

(This special issue belongs to the Section Materials Physics)

Advances in Fatigue and Fracture of Materials: Mechanisms, Modelling and Emerging Experimental Methods

edited by

Diogo Montalvão

submission deadline 20 Jul 2026 | Viewed by 22 | Submission Open

Keywords: fatigue damage; fracture mechanics; low-cycle fatigue; very high-cycle fatigue; structural integrity; additive manufacturing; microstructure– property relationships; crack initiation and propagation; multiscale modelling; reliability and durability

(This special issue belongs to the Section Mechanics of Materials)

Corrosion Mitigation and Protection of Metals and Alloys

edited by

Nadia Arrousse

submission deadline 20 Jul 2026 | Viewed by 13 | Submission Open

Keywords: corrosion; corrosion inhibition; green inhibitors; electrochemical studies; DFT; Monte Carlo simulation; dynamic simulation; surface analysis

(This special issue belongs to the Section Corrosion)

Synthesis–Processing–Structure–Property Interrelationship of Multifunctional Polymeric Materials and Natural Polymers

edited by

Aleksander Hejna

submission deadline 25 Jul 2026 | 13 articles | Viewed by 33561 | Submission Open

Keywords: mechanical; thermal; dielectric; tribological; electronic properties; advanced multiscale processing methods; polymer synthesis and reactions; polymers for advanced application; polymer composites and nanocomposites; enhanced durability of polymers; biomass-derived materials; biodegradable polymers; eco-polymer composites; natural polymers and derivatives; nanotechnology for polymers; green solvent/process/synthesis of polymers; biomedical polymers; polymers for CO2 capture; polymers for capturing pollution

(This special issue belongs to the Section Polymeric Materials)

Mechanical Performance and Microstructural Characterization of Light Alloys (3rd Edition)

edited by

Qinghuan Huo

submission deadline 30 Jul 2026 | 4 articles | Viewed by 3555 | Submission Open

Keywords: aluminum alloys; magnesium alloys; titanium alloys; mechanical performance; microstructure characterization; heat treatment; plastic processing; precipitation; phase transformation

(This special issue belongs to the Section Metals and Alloys)

Mechanical Behavior of Composite Materials (4th Edition)

edited by

Jaime Viña

submission deadline 30 Jul 2026 | Viewed by 69 | Submission Open

Keywords: fracture; fatigue; creep; tensile; compression; adhesive joints; 3D composites; mechanical tests; mechanical properties

(This special issue belongs to the Section Advanced Composites)

Understanding and Further Development of Directed Energy Deposition Process

edited by

Shinichi Tashiro

submission deadline 31 Jul 2026 | Viewed by 161 | Submission Open

Keywords: directed energy deposition; additive manufacturing; process mechanisms; heat source properties; heat source– material interaction; heat transfer; fluid mechanics; weld pool; microstructure; mechanical properties

(This special issue belongs to the Section Manufacturing Processes and Systems)

Nanomaterials-Based Optoelectronic Devices: Design, Fabrication and Characterization

edited by

Shengyi Yang

submission deadline 31 Jul 2026 | Viewed by 87 | Submission Open

Keywords: nanomaterials; light-emitting diodes; photodetectors; solar cells; field-effect transistors

(This special issue belongs to the Section Optical and Photonic Materials)

Functional Materials for Memristors, Metal-Insulator-Metal (MIM) Tunneling Diodes and Field Effect Transistors (FET)

edited by

Mustafa Yavuz

submission deadline 10 Aug 2026 | 3 articles | Viewed by 7955 | Submission Open

Keywords: tunneling MIM diodes; memristors; FET; emerging materials; neuromorphic chips; volatile memory and information processing; 3D imaging via neuromorphic chips

(This special issue belongs to the Section Electronic Materials)

Microstructural, Mechanical, and Durability Characteristics of Cementitious Materials (3rd Edition)

edited by

Ruizhe Si

and

Shuaicheng Guo

submission deadline 10 Aug 2026 | 2 articles | Viewed by 375 | Submission Open

Keywords: cementitious materials; mechanical properties; durability; microstructure; advanced materials characterization; numerical simulations; experimental findings

(This special issue belongs to the Section Construction and Building Materials)

3D-Printed Composite Structures: Design, Properties and Application—2nd Edition

edited by Hongyong Jiang, Guangchao Han and Fuchu Liu

submission deadline 10 Aug 2026 | Viewed by 182 | Submission Open

Keywords: 3D printing/additive manufacturing; composite structure; 3D printing processing; strustural design; mechanical property

(This special issue belongs to the Section Manufacturing Processes and Systems)

Ultrasound Applications in Materials Science and Processing

edited by

Francesca Lionetto

submission deadline 10 Aug 2026 | Viewed by 80 | Submission Open

Keywords: ultrasonic wave propagation; non-destructive inspection; guided waves; material characterization; vscolastic properties; ultrasonic welding; ultrasonic sonochemistry; numerical modeling; heat and mass transport phenomena; food processing; environmental protection; industrial processing; waste recycling

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advances in Low-Carbon and Zero-Carbon Metallurgical Technologies

edited by

Kezhou Song

and

Ying-De Huang

submission deadline 10 Aug 2026 | Viewed by 71 | Submission Open

Keywords: preparation of metal alloy; hydrogen metallurgy; secondary resource recycling; metallurgy of materials; metallurgical electrochemistry; bio-leaching and bio-recovery; optimization of transportation; novel reactor design; LCA and techno-economic analysis; advanced materials for harsh environments

(This special issue belongs to the Section Manufacturing Processes and Systems)

Physico-Chemical Modification of Materials for Biomedical Application (2nd Edition)

edited by

Bernadeta Dobosz

and

Joanna Czwartos

submission deadline 10 Aug 2026 | Viewed by 70 | Submission Open

Keywords: chemical modification; surface coating; functionalization with biomolecules and drugs; plasma treatment; exposure to SXR/EUV/UV radiation; laser processing; grafting with nanoparticles; polymers; carbon materials; nanoparticles (metal; lipid; polymer)

(This special issue belongs to the Section Biomaterials)

Low-Carbon and Multifunctional Concrete for Sustainable Infrastructure

edited by Dianchao Wang, Bochao Sun and

Ngoc Kien Bui

submission deadline 10 Aug 2026 | Viewed by 18 | Submission Open

Keywords: low-carbon concrete; multifunctional concrete; CO2 sequestration; recycled aggregate concrete; toughness and ductility; impact and blast resistance; thermal and acoustic insulation; vibration damping; 3D-printed concrete; FRP-reinforced concrete; circular economy; sustainable infrastructure

(This special issue belongs to the Section Construction and Building Materials)

Functional/Structural Polymers and Composites Produced by the Addition of Plant Biomass or Waste Materials Using Various Production Technologies

edited by

Beata Anwajler

submission deadline 20 Aug 2026 | 6 articles | Viewed by 5791 | Submission Open

Keywords: additive manufacturing; 3D printing; sustainability; natural fillers; biocomposites; biomass

(This special issue belongs to the Section Green Materials)

Life-Cycle Assessment of Sustainable Concrete

edited by Xiaoxu Huang,

Biao Hu

and

Yurong Zhang

submission deadline 20 Aug 2026 | 4 articles | Viewed by 4311 | Submission Open

Keywords: life-cycle assessment (LCA); sustainable concrete; environment impacts; economic analysis; recycled and reused materials; material optimization; durability

(This special issue belongs to the Section Construction and Building Materials)

Advanced Metal Alloys/Metal Matrix Composites for Automobile and Aerospace Engineering

edited by

Zhili Hu

,

Tao Wang

, Liang Chen and Liang Huang

submission deadline 20 Aug 2026 | 5 articles | Viewed by 4199 | Submission Open

Keywords: light metals and alloys; metal matrix composites; high-strength steels; hot forming; additive manufacturing; joining/welding techniques for lightweight structures; designing lightweight structures; manufacturing lightweight components

(This special issue belongs to the Section Metals and Alloys)

Advances in Hydration, Microstructure, and Properties of Modern Cement and Concrete Composites

edited by

Xin Liu

and

Mingqi Li

submission deadline 20 Aug 2026 | 4 articles | Viewed by 4166 | Submission Open

Keywords: hydration; microstructure; properties; modellings; material design; low carbon; modern cement and concrete

(This special issue belongs to the Section Construction and Building Materials)

Recycled Materials in Concrete: Towards a Circular Economy in Construction

edited by

Se-Jin Choi

and

Wenzhong Zhu

submission deadline 20 Aug 2026 | 5 articles | Viewed by 3953 | Submission Open

Keywords: recycled materials; waste materials; concrete; circular economy; sustainability

(This special issue belongs to the Section Construction and Building Materials)

New Thermal Insulation Materials in Green Buildings

edited by

Jitka Peterková

and

Jiří Zach

submission deadline 20 Aug 2026 | 4 articles | Viewed by 2484 | Submission Open

Keywords: insulation materials based on easy renewable resources; natural fibres; waste fibres; vacuum insulation materials; ecological materials; recycling; LCA; green buildings

(This special issue belongs to the Section Construction and Building Materials)

Microstructural and Mechanical Characteristics of Welded Joints

edited by Jie Wu and Guoqiang Huang

submission deadline 20 Aug 2026 | 3 articles | Viewed by 2440 | Submission Open

Keywords: electronic packaging; solder joint; reliability; interfacial metallurgy; friction stir welding/processing; dissimilar metal joining; additive manufacturing; microstructure; properties

(This special issue belongs to the Section Manufacturing Processes and Systems)

Cement-Based Materials and Construction Materials: Modeling, Characterization, and Mechanical Behavior (Second Edition)

edited by

Maria Lippiello

,

Antonio Sandoli

and Carla Ceraldi

submission deadline 20 Aug 2026 | 1 articles | Viewed by 1671 | Submission Open

Keywords: construction materials; mechanical behavior; modeling and simulations; cement-based materials; concrete; masonry; timber

(This special issue belongs to the Section Construction and Building Materials)

Recent Advances and Emerging Challenges in Functional Coatings (2nd Edition)

edited by

Alessia Serena Perna

submission deadline 20 Aug 2026 | 3 articles | Viewed by 1586 | Submission Open

Keywords: surface treatments technologies; functional coatings; sustainable coatings; cold spray; HVAF; HVOF; weld arc; oxidation; plasma spray; surface modification

(This special issue belongs to the Section Thin Films and Interfaces)

Radiation Damage and Radiation Defects of Materials

edited by Wentuo Han and

Yifan Zhang

submission deadline 20 Aug 2026 | 1 articles | Viewed by 1343 | Submission Open

Keywords: radiation damage; radiation defects; ion irradiation; defects recovery; irradiation hardening; irradiation embrittlement; irradiation creep

(This special issue belongs to the Section Materials Physics)

Advances in Repair Materials for Sustainable Building

edited by

Ilaria Capasso

submission deadline 20 Aug 2026 | 1 articles | Viewed by 1242 | Submission Open

Keywords: sustainable repairing materials; eco-friendly building materials; historical buildings conservation; protection methods for cultural heritage; sustainable heritage restoration; green buildings

(This special issue belongs to the Section Construction and Building Materials)

Novel Materials in Highway Engineering

edited by Canlin Zhang, Xiaobin Han and

Shi Xu

submission deadline 20 Aug 2026 | 1 articles | Viewed by 1004 | Submission Open

Keywords: design and application of multifunctional material; waste materials utilization; low-carbon emission materials; long-life materials; green environmental protection material; novel characterization of materials

(This special issue belongs to the Section Construction and Building Materials)

Research Progress on Electrolytes and Electrode Materials for Solid-State Batteries

edited by

Artur Tron

submission deadline 20 Aug 2026 | 1 articles | Viewed by 982 | Submission Open

Keywords: solid-state batteries; solid electrolytes; electrode materials; interface engineering; ionic conductivity; composite electrodes; battery modeling and simulation; next-generation batteries

(This special issue belongs to the Section Energy Materials)

Advanced Functional Materials for Energy Harvesting, Storage, and Intelligent Systems

edited by

Manesh Yewale

and Santosh Mohite

submission deadline 20 Aug 2026 | 1 articles | Viewed by 960 | Submission Open

Keywords: energy storage; supercapacitor; gas sensing; HER; OER; battery; single-atom catalysts; lithium-ion batteries; nanocomposites; oxidation and reduction reactions; hydrogen production; CO2 conversion; energy harvesting; sensors; actuators

(This special issue belongs to the Section Energy Materials)

Innovative Materials for Environmental Sustainability and Bio-Composites

edited by

Sung Won Hwang

and Bo-Hyung Kim

submission deadline 20 Aug 2026 | Viewed by 337 | Submission Open

Keywords: biocompatible materials; environmental engineering; composite materials; diamond-like carbon coatings; electrospun polymers; biomedical devices; surface treatments; material resilience; sustainable engineering; hybrid composites

(This special issue belongs to the Section Biomaterials)

Complex Ceramic Materials with Advanced Properties for Versatile Applications

edited by

Daniela Predoi

and

Carmen Steluta Ciobanu

submission deadline 20 Aug 2026 | Viewed by 204 | Submission Open

Keywords: ceramic materials; biocomposites; biopolymers; biological properties; physico-chemical features; environmental applications; drug delivery; biomedical applications; biotechnology; pharmaceutical applications

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Recycling and Repurposing of Waste Materials for Sustainable Green Composites

edited by

Rajab Abousnina

submission deadline 20 Aug 2026 | Viewed by 197 | Submission Open

Keywords: waste-based composites; recycled materials; geopolymers; sustainable concrete; construction materials; fibre-reinforced composites; additive manufacturing; durability and microstructure; low-carbon construction materials

(This special issue belongs to the Section Green Materials)

Materials for Syngas Storage: Advanced Solutions and Technologies

edited by

Liutauras Marcinauskas

and

Žydrūnas Kavaliauskas

submission deadline 20 Aug 2026 | Viewed by 196 | Submission Open

Keywords: syngas; metal hydride; materials; coatings

(This special issue belongs to the Section Energy Materials)

Advances in Electrodeposition Process for Materials

edited by Kranthi Maniam and

Shiladitya Paul

submission deadline 20 Aug 2026 | Viewed by 180 | Submission Open

Keywords: electrodeposition; semiconductors; CO2 utilization; sensors; electrolysers; corrosion resistance; wear resistance

(This special issue belongs to the Section Thin Films and Interfaces)

Waste Material Utilization and Recycled Materials for Sustainable Construction

edited by

Nuha Mashaan

submission deadline 20 Aug 2026 | Viewed by 173 | Submission Open

Keywords: sustainable construction; waste material utilization; circular economy; green civil engineering; recycled materials; environmental impact; life cycle assessment

(This special issue belongs to the Section Construction and Building Materials)

Advances in Materials for Electromagnetic Shielding and Absorbing

edited by Kaifeng Wang

submission deadline 20 Aug 2026 | Viewed by 153 | Submission Open

Keywords: carbon-based nanocomposites; MOF-derivates; MXene; dielectric loss; conductive network; EMI shielding

(This special issue belongs to the Section Electronic Materials)

Mechanical Properties of Engineering Materials and Their Evaluation Methods

edited by Haijun Xuan and

Chuanyong Chen

submission deadline 20 Aug 2026 | Viewed by 124 | Submission Open

Keywords: advanced engineering materials; mechanical properties; novel testing and evaluation techniques; advanced modeling and simulation methods; multi-scale study; durability and degradation; machine learning

(This special issue belongs to the Section Mechanics of Materials)

Fatigue and Fracture of Metals and Alloys: Numerical and Experimental Study (4th Edition)

edited by Aiguo Zhao

submission deadline 20 Aug 2026 | Viewed by 120 | Submission Open

Keywords: fracture mechanics; fatigue; constraint effect; digital image correlation; fatigue strength

(This special issue belongs to the Section Metals and Alloys)

Waste Materials: Recycle and Valorize

edited by

Lorena Alcaraz

and

Olga Rodríguez Largo

submission deadline 20 Aug 2026 | Viewed by 119 | Submission Open

Keywords: waste valorization; waste management; recycling technologies; circular economy; sustainable design; waste reuse; resource recovery; sustainable solutions

(This special issue belongs to the Section Green Materials)

Mechanical, Tribological and Microstructural Characterization of Functional Coatings

edited by

Giuseppe Pintaude

and

Rassim Younes

submission deadline 20 Aug 2026 | Viewed by 115 | Submission Open

Keywords: functional coatings; metals; ceramics; surface engineering; tribological performance; mechanical characterization; microstructural analysis; deposition techniques; advanced materials; surface integrity

(This special issue belongs to the Section Thin Films and Interfaces)

Advances in Functional Coatings and Films for Thermal, Wear and Corrosion Protection

edited by Rui Yang and Botao Zhang

submission deadline 20 Aug 2026 | Viewed by 94 | Submission Open

Keywords: functional coatings; thin films; fabrication methods; advanced materials; structure– property relationships; corrosion resistance; tribology; thermal protection; wear protection; mechanical durability; energy applications; marine applications; automotive applications; biomedical applications

(This special issue belongs to the Section Thin Films and Interfaces)

Synergy in Polyphase Materials: Harnessing the Power of Glass and Ceramics (2nd Edtion)

edited by

Michael Ojovan

,

Georgiy Shakhgildyan

and Kai Xu

submission deadline 20 Aug 2026 | Viewed by 76 | Submission Open

Keywords: vitreous materials; glass– ceramics; polyphase materials; nanoscale polyphase structures; sintering techniques; crystallization processes; laser micromachining; functional materials; composite material interfaces

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Intelligent Manufacturing Systems: Advanced Materials, Machinability, and Smart Robotics

edited by

Anna Burduk

,

Andre Batako

,

Anthony Xavior Michael

, Suthep Butdee and Kamil Krot

submission deadline 20 Aug 2026 | Viewed by 63 | Submission Open

Keywords: composites; aerospace materials; cutting tools; machinability; production management; intelligent manufacturing; advanced robotics; autonomus mobile robots

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Deposition Techniques for High-Performance Cutting Tool Coatings

edited by

Gustavo Filipe Pinto

and

Andresa Baptista

submission deadline 20 Aug 2026 | Viewed by 57 | Submission Open

Keywords: PVD and CVD techniques; deposition improvement; sputtering DC; HiPIMS; numerical simulation; coatings characterization; hard coatings; thin films; wear; adhesion

(This special issue belongs to the Section Thin Films and Interfaces)

Advanced Laser and Optical Methods for Material Analysis, Surface Engineering, and Performance Enhancement

edited by

Bratislav Obradović

, Nenad Sakan and

Dragan Ranković

submission deadline 20 Aug 2026 | Viewed by 55 | Submission Open

Keywords: laser-induced breakdown spectroscopy (LIBS); laser processing; optical characterization; surface engineering; coatings; thin films; material performance; multiscale analysis; modeling; functional materials

(This special issue belongs to the Section Advanced Materials Characterization)

2D Materials: Fundamentals and Applications

edited by Ghulam Dastgeer

submission deadline 20 Aug 2026 | Viewed by 55 | Submission Open

Keywords: two-dimensional materials; van der Waals materials; graphene and TMDs; 2D heterostructures; synthesis and characterization; electronic and optoelectronic devices; 2D semiconductor physics; flexible and wearable electronics; energy storage and catalysis; emerging applications of 2D materials

(This special issue belongs to the Section Materials Physics)

Nanoparticle-Driven Covalent Adaptable Networks (NP-CANs): Toward Self-Healing and Recyclable Biomedical Polymers

edited by

Klementina Pušnik Črešnar

and

Olivija Plohl

submission deadline 20 Aug 2026 | Viewed by 55 | Submission Open

Keywords: covalent adaptable networks (CANs); dynamic covalent chemistry (DCC); nanoparticles; self-healing polymers; recyclability; biomedical materials; vitrification temperature; smart biomaterials

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advances in Biopolymers and Sustainable Composites for Biomedical and Industrial Applications

edited by

Tomasz Witko

submission deadline 20 Aug 2026 | Viewed by 54 | Submission Open

Keywords: biopolymers; sustainable composites; additive manufacturing; biodegradability; biomedical applications; natural additives; bioactive materials; life-cycle assessment; mechanical properties; functional properties

(This special issue belongs to the Section Biomaterials)

Naturally Derived Biomaterials for Regenerative Medicine Applications (2nd Edition)

edited by Agata Przekora-Kuśmierz and

Paulina Kazimierczak

submission deadline 20 Aug 2026 | Viewed by 53 | Submission Open

Keywords: tissue engineering; wound dressings; artificial skin grafts; cartilage scaffolds; bone scaffolds; drug carriers; 3D printing; electrospinning

(This special issue belongs to the Section Biomaterials)

Nanostructured Materials and Nanometric Coatings for Antimicrobial and Surface Functionalization

edited by

Federica Paladini

and

Rebecca Pellegrino

submission deadline 20 Aug 2026 | Viewed by 52 | Submission Open

Keywords: biomedical; nanostructured materials; nanocoating; surface functionalization; antimicrobial mechanisms; biocompatibility; bioengineering; material science

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI