Advances in Trauma and Orthopedic Surgery

Background: The biomechanical outcomes of intra-articular calcaneal fracture treatment have not been fully explored. The purpose of this study was to analyze pedobarographic assessments of balance and body weight distribution over the lower limbs in patients following calcaneal fracture treatment with the Ilizarov method and to compare the results with those of a control group. Materials and Methods: The data for our retrospective study came from cases of intra-articular calcaneal fractures treated with the Polish modification of the Ilizarov method in the period between 2021 and 2022. The experimental group (21 patients; 7 women, 14 men) included Sanders classification calcaneal fractures type 2 (n = 3), type 3 (n = 5), and type 4 (n = 13). The control group comprised 21 sex-matched healthy volunteers, with no significant differences from the experimental group in terms of age or BMI. The examination included an assessment of balance and weight distribution over the lower limbs. The device used was a FreeMED MAXI pedobarographic platform (SensorMedica). Results: The mean displacement of the center of gravity in the experimental group was significantly higher at 1307.31 mm than in the control group (896.34 mm; p = 0.038). The mean area of the center of gravity was not significantly different between the groups. An analysis of weight distribution over the operated and uninjured limb in the experimental group and the non-dominant and dominant limb, respectively, in the control group revealed no significant differences. We observed no significant differences in the percentage of weight distribution over the lower limbs between the operated limb in the experimental group and the non-dominant limb in the control group, or between the uninjured limb in the experimental group and the dominant limb in the control group. Conclusions: The use of the Ilizarov method in calcaneal fracture treatment helps normalize the percentage weight distribution in the lower limbs, with the results comparable with those obtained in the healthy control group. The mean displacement of the center of gravity was worse in the experimental group than in controls; whereas the mean area of the center of gravity was comparable between the two groups. Treatment of calcaneal fractures with the Ilizarov method does not help achieve completely normal static parameters of lower-limb biomechanics. Patients treated for calcaneal fractures with the Ilizarov method require longer and more intense rehabilitation and follow-up. Full article

Background: The aim of this study was to evaluate detection rates and risk factors for unsuspected proof of bacteria, as well as clinical and radiologic outcomes following femoral shaft nonunion without clinical signs of infection treated by a single-stage surgical revision procedure including reamed intramedullary exchange nailing. Methods: A retrospective cohort study was performed in a European level I trauma center between January 2015 and December 2022. Fifty-eight patients were included who underwent reamed intramedullary exchange nailing as a single-step procedure for surgical revision of posttraumatic diaphyseal femoral nonunion without any indications of infection in medical history and without clinical signs of local infection. Clinical details of the patients were analyzed and functional and radiologic long-term outcomes were determined. Results: In all patients, with and without proof of bacteria osseous, healing could be observed. The physical component summary of the SF-12 demonstrated significantly better results at least one year after the final surgical revision in case of a negative bacterial culture during exchange nailing. Conclusions: Clinical long-term outcomes demonstrated a trend towards better results following femoral shaft nonunion revision if there was no evidence for the presence of low-grade infected nonunion. In this case, a single-stage surgical procedure may be recommended. Full article

Background: Multi-comminuted, intra-articular fractures of the distal humerus still pose a challenge to modern orthopedics due to unsatisfactory treatment results and a high percentage (over 50%) of postoperative complications. When surgical treatment is chosen, such fractures are fixed using two plates with locking screws, which can be used in three spatial configurations: either parallel or one of two perpendicular variants (posterolateral and posteromedial). The evaluation of the fracture healing conditions for these plate configurations is unambiguous. The contradictions between the conclusions of biomechanical studies and clinical observations were the motivation to undertake a more in-depth biomechanical analysis aiming to indicate the weak points of two-plate fracture stabilization. Methods: Research was conducted using the finite element method based on an experimentally validated model. Three variants of distal humerus fracture (Y, λ, and H) were fixed using three different plate configurations (parallel, posterolateral, and posteromedial), and they were analyzed under six loading conditions, covering the whole range of flexion in the elbow joint (0–145°). A joint reaction force equal to 150 N was assumed, which corresponds with holding a weight of 1 kg in the hand. The biomechanical conditions of bone union were assessed based on the interfragmentary movement (IFM) and using criteria formulated by Steiner et al. Results: The IFMs were established for particular regions of all of the analyzed types of fracture, with distinction to the normal and tangential components. In general, the tangential component of IFM was greater than normal. A strong influence of the elbow joint’s angular position on the IFM was observed, with excessive values occurring for flexion angles greater than 90°. In most cases, the smallest IFM values were obtained for the parallel plaiting, while the greatest values were obtained for the posteromedial plating. Based on IFM values, fracture healing conditions in particular cases (fracture type, plate configuration, loading condition, and fracture gap localization) were classified into one of four groups: optimal bone union (OPT), probable union (PU), probable non-union (PNU), and non-union (NU). Conclusions: No plating configuration is able to ensure distal humerus fracture union when the full elbow flexion is allowed while holding a weight of 1 kg in the hand. However, flexion in the range of 0–90° with such loadings is acceptable when using parallel plating, which is a positive finding in the context of the early rehabilitation process. In general, parallel plating ensures better conditions for fracture healing than perpendicular plate configurations, especially the posteromedial version. Full article

(1) Background: Demographic changes over the past decade have had a significant impact on pelvic ring fractures. They have increased dramatically in the orthogeriatric population. Surgeons are faced with implant fixation issues in the treatment of these fragility fractures. This study compares two innovative implants for stabilizing the iliosacral joint in a biomechanical setting. (2) Methods: An iliosacral screw with a preassembled plate allowing the placement of an additional short, angular stable screw in the ilium and a triangular fixation system consisting of a fenestrated ilium screw and an iliosacral screw quasi-statically inserted through the “fenestra” were instrumented in osteoporotic artificial bone models with a simulated Denis zone 1 fracture. Biomechanical testing was performed on a servo-hydraulic testing machine using increasing, synchronous axial and torsional sinusoidal cyclic loading to failure. (3) Results: The SI-Plate and TriFix showed comparable stiffness values. The values for fracture gap angle and screw tip cutout were significantly lower for the TriFix compared to the SI-Plate. In addition, the number of cycles to failure was significantly higher for the TriFix. (4) Conclusions: Implant anchorage and primary stability can be improved in iliosacral instability using the triangular stabilization system. Full article

Background: Proximal humerus fractures are seen frequently, particularly in older patients. The development of new osteosynthesis materials is being driven by the high complication rates following surgical treatment of proximal humerus fractures. Plate osteosyntheses made of steel, titanium and, for several years now, carbon fiber-reinforced polyetheretherketone (CFR-PEEK) are used most frequently. Methods: A prospective, randomized study was conducted in order to evaluate whether there are differences in the functional postoperative outcome when comparing CFR-PEEK and titanium implants for surgical treatment of proximal humerus fractures. The primary outcome of shoulder functionality 1 year after surgery was measured with the DASH score, the Oxford Shoulder Score, and the Simple Shoulder Test. Results: Bony consolidation of the respective fracture was confirmed in all the patients included in the study within the scope of postoperative follow-up care. No significant differences in the DASH score, Oxford Shoulder Score, or Simple Shoulder Test were observed 1 year post-operatively when comparing the implant materials CFR-PEEK and titanium. Conclusions: There are no differences in terms of the functional outcome between CFR-PEEK plates and titanium implants 1 year after surgery. Studies on the long-term outcomes using CFR-PEEK plates in osteoporotic bone should be the subject of further research. Full article

Background: Severe thoracic trauma can lead to pulmonary restriction, loss of lung volume, and difficulty with ventilation. In recent years, there has been increasing evidence of better clinical outcomes following surgical stabilization of clavicle fractures in the setting of this combination of injuries. The aim of this study was to evaluate surgical versus non-surgical treatment of clavicle fractures in severe thoracic trauma in terms of clinical and radiological outcomes in order to make a generalized treatment recommendation based on the results of a large patient cohort. Patients and Methods: This retrospective study included 181 patients (42 women, 139 men) from a European level I trauma centre with a median of 49.3 years in between 2005 and 2021. In 116 cases, the clavicle fracture was stabilized with locking plate or hook plate fixation (group 1), and in 65 cases, it was treated non-surgically (group 2). Long-term functional outcomes at least one year postoperatively using the disabilities of the arm, shoulder and hand (DASH) questionnaire and the Nottingham Clavicle Score (NCS) as well as radiological outcomes were collected in addition to parameters such as hospital days, intensive care days, and complication rates. Results: The Injury Severity Score (ISS) was 17.8 ± 9.8 in group 1 and 19.9 ± 14.4 in group 2 (mean ± SEM; p = 0.93), the time in hospital was 21.5 ± 27.2 days in group 1 versus 16 ± 29.3 days in group 2 (p = 0.04). Forty-seven patients in group 1 and eleven patients in the group 2 were treated in the ICU. Regarding the duration of ventilation (group 1: 9.1 ± 8.9 days, group 2: 8.1 ± 7.7 days; p = 0.64), the functional outcome (DASH group 1: 11 ± 18 points, group 2: 13.7 ± 18. 4 points, p = 0.51; NCS group 1: 17.9 ± 8.1 points, group 2: 19.4 ± 10.3 points, p = 0.79) and the radiological results, no significant differences were found between the treatment groups. With an overall similar complication rate, pneumonia was found in 2% of patients in group 1 and in 14% of patients in group 2 (p = 0.001). Discussion: This study could demonstrate that surgical locking plate fixation of clavicle fractures in combination with CWI significantly reducing the development of posttraumatic pneumonia in a large patient collection and, therefore, can be recommended as standard therapeutic approach for severe thoracic trauma. Full article

Long bone fractures in hostile environments pose unique challenges due to limited resources, restricted access to healthcare facilities, and absence of surgical expertise. While external fixation has shown promise, the availability of trained surgeons is limited, and the procedure may frighten unexperienced personnel. Therefore, an easy-to-use external fixator (EZExFix) that can be performed by nonsurgeon individuals could provide timely and life-saving treatment in hostile environments; however, its efficacy and accuracy remain to be demonstrated. This study tested the learning curve and surgical performance of nonsurgeon analog astronauts (n = 6) in managing tibial shaft fractures by the EZExFix during a simulated Mars inhabited mission, at the Mars Desert Research Station (Hanksville, UT, USA). The reduction was achievable in the different 3D axis, although rotational reductions were more challenging. Astronauts reached similar bone-to-bone contact compared to the surgical control, indicating potential for successful fracture healing. The learning curve was not significant within the limited timeframe of the study (N = 4 surgeries lasting <1 h), but the performance was similar to surgical control. The results of this study could have important implications for fracture treatment in challenging or hostile conditions on Earth, such as war or natural disaster zones, developing countries, or settings with limited resources. Full article

Joint destruction necessitates tibiotalocalcaneal arthrodesis (TTCA) in cases of clinical deficits that cannot be controlled conservatively, possibly leading to sepsis. We aimed to compare the underlying etiology of posttraumatic joint destruction and the outcomes after TTCA in patients with a septic or aseptic history. Between 2010 and 2022, 216 patients with TTCA were retrospectively enrolled (septic TTCA (S-TTCA) = 129; aseptic TTCA (A-TTCA) = 87). Patient demographics, etiology, Olerud and Molander Ankle Scores (OMASs), Foot Function Index (FFI-D) scores, and Short Form-12 Questionnaire (SF-12) scores were recorded. The mean follow-up period was 6.5 years. Tibial plafond and ankle fractures were the most common causes of sepsis. The mean OMAS was 43.0; the mean FFI-D was 76.7; and the mean SF-12 physical component summary score was 35.5. All the scores differed significantly between the groups (p < 0.001). With an average of 11 operations until the arthrodesis was achieved, the S-TTCA patients underwent about three times as many operations as the A-TTCA patients (p < 0.001), and 41% of S-TTCA patients remained permanently unable to work (p < 0.001). The significantly worse results of S-TTCA compared to A-TTCA show the long and stressful ordeal that patients with a septic history suffer. Further attention must be paid to infection prophylaxis and, if necessary, early infection revision. Full article

Background: Ipsilateral revision surgeries of total hip or knee arthroplasties due to periprosthetic fractures or implant loosening are becoming more frequent in aging populations. Implants in revision arthroplasty usually require long anchoring stems. Depending on the residual distance between two adjacent knee and hip implants, we assume that the risk of interprosthetic fractures increases with a reduction in the interprosthetic distance. The aim of the current study was to investigate the maximum strain within the femoral shaft between two ipsilateral implants tips. Methods: A simplified physical model consisting of synthetic bone tubes and metallic implant cylinders was constructed and the surface strains were measured using digital image correlation. The strain distribution on the femoral shaft was analyzed in 3-point- and 4-point-bending scenarios. The physical model was transferred to a finite element model to parametrically investigate the effects of the interprosthetic distance and the cortical thickness on maximum strain. Strain patterns for all parametric combinations were compared to the reference strain pattern of the bone without implants. Results: The presence of an implant reduced principal strain values but resulted in distinct strain peaks at the locations of the implant tips. A reduced interprosthetic distance and thinner cortices resulted in strain peaks of up to 180% compared to the reference. At low cortical thicknesses, the strain peaks increased exponentially with a decrease in the interprosthetic distance. An increasing cortical thickness reduced the peak strains at the implant tips. Conclusions: A minimum interprosthetic distance of 10 mm seems to be crucial to avoid the accumulation of strain peaks caused by ipsilateral implant tips. Interprosthetic fracture management is more important in patients with reduced bone quality. Full article

Introduction: Surgical site infections after operative stabilization of pelvic and acetabular fractures are rare but serious complications. The treatment of these infections involves additional surgical procedures, high health care costs, a prolonged stay, and often a worse outcome. In this study, we focused on the impact of the different causing bacteria, negative microbiological results with wound closure, and recurrence rates of patients with implant-associated infections after pelvic surgery. Material and Methods: We retrospectively analyzed a study group of 43 patients with microbiologically proven surgical site infections (SSI) after surgery of the pelvic ring or the acetabulum treated in our clinic between 2009 and 2019. Epidemiological data, injury pattern, surgical approach, and microbiological data were analyzed and correlated with long-term follow-up and recurrence of infection. Results: Almost two thirds of the patients presented with polymicrobial infections, with staphylococci being the most common causing agents. An average of 5.7 (±5.4) surgical procedures were performed until definitive wound closure. Negative microbiological swabs at time of wound closure were only achieved in 9 patients (21%). Long-term follow-up revealed a recurrence of infection in only seven patients (16%) with an average interval between revision surgery and recurrence of 4.7 months. There was no significant difference of recurrence rate for the groups of patients with positive/negative microbiology in the last operative revision (71% vs. 78%). A positive trend for a correlation with recurrent infection was only found for patients with a Morel–Lavallée lesion due to run-over injuries (30% vs. 5%). Identified causing bacteria did not influence the outcome and rate of recurrence. Conclusion: Recurrence rates after surgical revision of implant-associated infections of the pelvis and the acetabulum are low and neither the type of causing agent nor the microbiological status at the timepoint of wound closure has a significant impact on the recurrence rate. Full article

Background: Partial weight-bearing after operatively treated fractures has been the standard of care over the past decades. Recent studies report on better rehabilitation and faster return to daily life in case of immediate weight-bearing as tolerated. To allow early weight-bearing, osteosynthesis needs to provide sufficient mechanical stability. The purpose of this study was to investigate the stabilizing benefits of additive cerclage wiring in combination with intramedullary nailing of distal tibia fractures. Methods: In 14 synthetic tibiae, a reproducible distal spiral fracture was treated by intramedullary nailing. In half of the samples, the fracture was further stabilized by additional cerclage wiring. Under clinically relevant partial and full weight-bearing loads the samples were biomechanically tested and axial construct stiffness as well as interfragmentary movements were assessed. Subsequently, a 5 mm fracture gap was created to simulate insufficient reduction, and tests were repeated. Results: Intramedullary nails offer already high axial stability. Thus, axial construct stiffness cannot be significantly enhanced by an additive cerclage (2858 ± 958 N/mm NailOnly vs. 3727 ± 793 N/mm Nail + Cable; p = 0.089). Under full weight-bearing loads, additive cerclage wiring in well-reduced fractures significantly reduced shear (p = 0.002) and torsional movements (p = 0.013) and showed similar low movements as under partial weight-bearing (shear 0.3 mm, p = 0.073; torsion 1.1°, p = 0.085). In contrast, additional cerclage had no stabilizing effect in large fracture gaps. Conclusions: In well-reduced spiral fractures of the distal tibia, the construct stability of intramedullary nailing can be further increased by additional cerclage wiring. From a biomechanical point of view, augmentation of the primary implant reduced shear movement sufficiently to allow immediate weight-bearing as tolerated. Especially, elderly patients would benefit from early post-operative mobilization, which allows for accelerated rehabilitation and a faster return to daily activities. Full article

The treatment of defects of the long bones remains one of the biggest challenges in trauma and orthopedic surgery. The treatment path is usually very wearing for the patient, the patient’s environment and the treating physician. The clinical or regional circumstances, the defect etiology and the patient´s condition and mental status define the treatment path chosen by the treating surgeon. Depending on the patient´s demands, the bony reconstruction has to be taken into consideration at a defect size of 2–3 cm, especially in the lower limbs. Below this defect size, acute shortening or bone grafting is usually preferred. A thorough assessment of the patient´s condition including comorbidities in a multidisciplinary manner and her or his personal demands must be taken into consideration. Several techniques are available to restore continuity of the long bone. In general, these techniques can be divided into repair techniques and reconstructive techniques. The aim of the repair techniques is anatomical restoration of the bone with differentiation of the cortex and marrow. Currently, classic, hybrid or all-internal distraction devices are technical options. However, they are all based on distraction osteogenesis. Reconstructive techniques restore long-bone continuity by replacing the defect zone with autologous bone, e.g., with a vascularized bone graft or with the technique described by Masquelet. Allografts for defect reconstruction in long bones might also be described as possible options. Due to limited access to allografts in many countries and the authors’ opinion that allografts result in poorer outcomes, this review focuses on autologous techniques and gives an internationally aligned overview of the current concepts in repair or reconstruction techniques of segmental long-bone defects. Full article

Background: Retrograde drilling (RD) is a minimally invasive surgical procedure mainly used for non-displaced osteochondral lesions (OCL) of the talus, dealing with subchondral necrotic sclerotic lesions or subchondral cysts without inducing iatrogenic articular cartilage injury, allowing the revascularization of the subchondral bone and new bone formation. Methods: This systematic review collected and analyzed the clinical studies of the last 10 years of literature, focusing not only on the clinical results but also on patients’ related factors (gender, BMI, age and complications). Results: Sixteen clinical studies were retrieved, and differences in the type of study, follow-up, number and age of patients, lesion type, dimensions, grades and comparison groups were observed, making it difficult to draw conclusions. Nevertheless, lesions on which RD showed the best results were those of I–III grades and not exceeding 150 mm² in size, showing overall positive results, a good rate of patient satisfaction, improvements in clinical scores, pain reduction and return to daily activities and sports. Conclusions: There are still few studies dealing with the issue of post-surgical complications and gender-related responses. Further clinical or preclinical studies are thus mandatory to underline the success of this technique, also in light of gender differences. Full article

Treatment of a comminuted proximal humerus fracture (PHF) in elderly patients with severe osteoporosis is challenging, often leading to arthroplasty (such as hemiarthroplasty or reverse shoulder arthroplasty) as the treatment of choice. However, arthroplasty does not always guarantee favorable outcomes. In contrast, the use of intramedullary fibular strut allografts provides additional reduction stability during locking plate fixation; however, to our knowledge, there is limited literature on the use of fibular strut allografts, including the fibular head. Here we aim to report the advantages of using a fibular strut containing the fibular head in severe osteoporotic PHFs. We present the case of an 88-year-old female patient with severe osteoporosis diagnosed with a left PHF accompanied by severe metaphyseal comminution following a fall from a chair. Rather than shoulder arthroplasty, we performed osteosynthesis using a fibular strut allograft containing the fibular head. At the one-year follow-up after surgery, we observed excellent bony union and a favorable functional outcome without major complications, such as reduction loss. The novel use of a fibular strut allograft containing the fibular head could be promising for PHFs with severe metaphyseal comminution, potentially avoiding the need for arthroplasty. Full article

(1) Background: Ankle fractures are common injuries that typically require surgical treatment. Complications may arise, leading to reinterventions with poor recovery and reduced quality of life for patients. The aim of this study was to determine the number of patients who underwent surgical reintervention for ankle fractures, characteristics, and associated factors. (2) Methods: A cross-sectional study was conducted to analyze the number of patients requiring surgical intervention for ankle fractures at General Hospital Zone No1 IMSS in Colima over a period of two years. The age, gender, comorbidities, laterality, cause of surgical reintervention, Weber classification, and elapsed time to reintervention were analyzed. (3) Results: A total of 33 patients were included in this study, of whom 63.3% were male, ranging in age from 18 to 51 years old. The predominant Danis–Weber classification for both sexes was suprasyndesmotic fracture (Type C). No established relationship was found between comorbidities and surgical reintervention; however, a significant relationship was observed between home accidents and the need for reintervention. (4) Conclusions: Reintervention in patients previously operated on for ankle fractures is more frequent in male patients and those who sustained the injury at home. Full article

Although open surgery is the conventional option for ankle arthritis, there are some reports in the literature regarding the use of the arthroscopy procedure with outstanding results. The primary purpose of this systematic review and meta-analysis was to analyze the effect of the surgery technique (open-ankle arthrodesis vs. arthroscopy) in patients with ankle osteoarthritis. Three electronic databases (PubMed, Web of Science, and Scopus) were searched until 10 April 2023. The Cochrane Collaboration’s risk-of-bias tool was used to assess the risk of bias and grading of the recommendations assessment, development, and evaluation system for each outcome. The between-study variance was estimated using a random-effects model. A total of 13 studies (including n = 994 participants) met the inclusion criteria. The meta-analysis results revealed a nom-significant (p = 0.072) odds ratio (OR) of 0.54 (0.28–1.07) for the fusion rate. Regarding operation time, a non-significant difference (p = 0.573) among both surgical techniques was found (mean differences (MD) = 3.40 min [−11.08 to 17.88]). However, hospital length stay and overall complications revealed significant differences (MD = 2.29 days [0.63 to 3.95], p = 0.017 and OR = 0.47 [0.26 to 0.83], p = 0.016), respectively. Our findings showed a non-statistically significant fusion rate. On the other hand, operation time was similar among both surgical techniques, without significant differences. Nevertheless, lower hospital stay was found in patients that were operated on with arthroscopy. Finally, for the outcome of overall complications, the ankle arthroscopy technique was a protective factor in comparison with open surgery. Full article

Good clinical practice guidelines are based on randomized controlled trials or clinical series; however, technical performance bias among surgical trials is under-assessed. The heterogeneity of technical performance within different treatment groups diminishes the level of evidence. Surgeon variability with different levels of experience—technical performance levels even after certification—influences surgical outcomes, especially in complex procedures. Technical performance quality correlates with the outcomes and costs and should be measured by image or video-photographic documentation of the surgeon’s view field during the procedures. Such consecutive, completely documented, unedited observational data—in the form of intra-operative images and a complete set of eventual radiological images—improve the surgical series’ homogeneity. Thereby, they might reflect reality and contribute towards making necessary changes for evidence-based surgery. Full article