Skip to Content

Most Recent

  • Article
  • Open Access
214 Views
37 Pages

Pulsating flow offers a practical means of modifying convective heat transfer in microchannels, but thermal enhancement may be accompanied by increased thermodynamic irreversibility. This study develops a physics-informed neural network (PINN) framew...

  • Review
  • Open Access
362 Views
42 Pages

Advances in Thermal Enhanced Oil Recovery: From Fundamental Mechanisms to Field-Scale Applications and Screening Frameworks

  • Abdelaziz L. Khlaifat,
  • Sherif Fakher,
  • Ahmed Negm,
  • Ahmed Einar and ,
  • Amira El-Banbi,
  • Mennatallah Gehad,
  • Shady Shaaban and
  • Shams ElDakar
  • + 3 authors+ 0 author

Thermal traditional enhanced oil recovery (EOR) screening has long relied on static lookup tables that filter candidate reservoirs using fixed, isolated property cutoffs such as depth, net pay, permeability, and viscosity. While useful for preliminar...

  • Article
  • Open Access
442 Views
15 Pages

The results of a numerical modeling of the laminar water flow and mixed conductive–convective heat transfer in highly elongated heatsink with continuous rectangular microchannels, and a width-to-length ratio of 625 (i.e., 0.2 mm to 125 mm), are...

  • Article
  • Open Access
1 Citations
470 Views
21 Pages

The clearance of the nozzle vane significantly influences the aerodynamic performance of variable nozzle turbines (VNTs), often leading to increased flow losses and performance degradation. Although nozzle vane clearance often exhibits a non-uniform...

  • Article
  • Open Access
1 Citations
999 Views
20 Pages

Pin-fins are widely used to enhance heat transfer in compact heat exchangers, turbine cooling passages, and electronic devices, but their complex geometries make accurate thermal–fluid prediction computationally expensive. This paper presents a...

  • Article
  • Open Access
1 Citations
345 Views

This study investigates the laminar transport process due to a cone-shaped moving body of revolution, considering the effects of temperature-dependent viscosity and thermal conductivity. Considering variable flow properties and a cone- shaped surface...

  • Article
  • Open Access
2 Citations
940 Views

Numerical modeling of battery thermal management system with liquid cooling for electric vehicles

  • Mohammad Suhaib,
  • Mohd Amir Khan,
  • Mohd Muzammil Zubair and
  • Yasser Rafat

This study presents a comprehensive analysis of two advanced cooling methods immersion and bottom plate cooling applied to a cylindrical Lithium-ion battery cell (21700 format) for electric vehicles (EVs). Using 3D Computational Fluid Dynamics (CFD)...

  • Article
  • Open Access

A convection heat transfer from the surface of solid particle to fluid is simulated by a novel Thermal Lattice Boltzmann Method. Fluidsolid interactions and heat transfer between them are simulated based on External Boundary Force (EBF) method in whi...

  • Article
  • Open Access
3 Citations
342 Views

Flow and thermal performance of nanofluids on a rotating porous disk with forced flow

  • Ahmer Mehmood,
  • Haris Mehmood,
  • Iqrar Raza,
  • Muhammad Awais and
  • Muhammad Usman

The application of forced flow and suction has a significant impact on enhancing the efficiency of thermal management systems. This study explores the influence of forced flow and suction on improving the performance of thermal management systems, pa...

  • Article
  • Open Access
1 Citations
407 Views

gas recirculation (EGR) has important technology to control engine nitrogen oxide (NOx) emission of a light diesel engine and a thermoelectric generator (TEG) converts waste heat from the engine exhaust system into electrical power. However, this stu...

  • Article
  • Open Access
1 Citations
287 Views

The Naturally Ventilated Double-Skin Facades (NVDSF) functional mechanism is based on thermal performance of the components and airflow in the cavity. In this paper, 90 simulation scenarios by changing the geometric features of NVDSF are examined. To...

  • Article
  • Open Access

In this paper, the mechanics and hydrodynamics of a two-phase boiling flow were investigated, in which the increase in the vapor content in the flow occurs discretely at local vaporization centers distributed uniformly along the length of a vertical...

  • Article
  • Open Access

A numerical solution of the transient natural convection in the hottest channel of MTR nuclear fuel type is performed in this study by mean of the lumped parameter approach. After employing this approach, the momentum and the energy equations are red...

  • Article
  • Open Access

Designing a Vapour-Compression Cascade Refrigeration Setup Aimed at Storing Fresh Plasma

  • Olarewaju Oginni,
  • Bukola Bolaji,
  • Olatunde Oyelaran,
  • Adedotun Adetunla and
  • Ang Kiang Long

Throughout the duration of the COVID-19 pandemic, human plasma emerged as a primary resource for various therapeutic transfusions, leveraging its protein content as an alternative treatment for infectious ailments. Cascade refrigeration systems, with...

  • Article
  • Open Access
3 Citations
278 Views

A numerical investigation was conducted to explore the influence of magnetic field and the electric conductivity of container walls on the swirling flow of a hybrid nanofluid. In this study, a stationary inner wall and a rotating outer wall with a fi...

  • Article
  • Open Access
1 Citations
343 Views

The characteristics of heat transfer and fluid flow of an internally continuously finned tube were studied, experimentally and numerically, and a performance evaluation study was conducted. The numerical results were validated with the current experi...

  • Article
  • Open Access
1 Citations
323 Views

Numerical study of natural convection of Bingham fluid using a flexible fin

  • Hanaa Derraz,
  • Bouzit Mohamed,
  • Mokhefi Abderrahim,
  • Bencherif Atika and
  • Meriem Toumi

This research focuses on the analysis of the flow and heat transfer inside a square cavity containing a Bingham plastic fluid. The cavity undergoes heating on its left side, where a flexible and elastic fin is positioned at the center of this heated...

  • Article
  • Open Access

The present research aims to conduct a comparative examination between two refrigerants, the phase-out R22, and the new ecofriendly R161. They were used in two different ejector air conditioning cycles (Standard ejector cycle (SEC) and Modified eject...

  • Article
  • Open Access

This numerical research is done on the hydrodynamic and thermal characteristics of laminar forced convection of different nanofluids inside horizontal tube. The tube wall is subjected to a constant heat flux condition. Al2O3-water, Cu-water, and SiO2...

  • Article
  • Open Access

In this work, the generalized thermoelastic theory was used with one relaxation time in the context of (L. S) theory, to investigate the magneto-thermoelastic problem of a rotating infinite body with a circular cylindrical hole in the existence of a...

  • Article
  • Open Access

This study utilized a homogeneous phase model to examine the laminar forced convection flow within a broad rectangular microchannel. It involved the use of nanofluids composed of alumina (Al2O3) and a combined mixture of Al2O3 and silver (Ag) particl...

  • Article
  • Open Access
1 Citations
253 Views

The study of how greenhouse dimensions affect heat transfer and convection is pivotal in refining greenhouse design for optimal plant growth. In this context, this paper presents the aspect ratio effect on natural convection flow within a tunnel gree...

  • Article
  • Open Access

In this paper, A numerical analysis of Jeffrey fluid flow in a porous matrix with a collective impact of through flow, external electric field and viscous dissipation, was conducted to examine the onset of thermal convection. The critical Rayleigh nu...

  • Article
  • Open Access
1 Citations
278 Views

Performance analysis of ejector refrigeration cycle with zeotropic mixtures

  • Mohammed Mehemmai,
  • Hichem Grine,
  • Hakim Madani and
  • Cherif Bougriou

In this article, we present an energetic and thermodynamic study of a refrigeration cycle with ejector (RCE), through a zeotropic binary fluid. In this context, four binary mixtures based on R1234yf were chosen given their minimum GWP values. The obj...

  • Article
  • Open Access

This study employs numerical simulations using the combined control volume finite element method (CVFEM) to analyze 2D steady, incompressible laminar flow over a microscale backward facing step within a horizontal duct. The investigation focuses on t...

  • Article
  • Open Access
1 Citations
225 Views

Natural convection in two-dimensional space created by putting horizontal flat tube concentrically in cooled horizontal cylinder is studied numerically. The model solved using the ANSYS CFX package. The numerical simulations covered a range of power-...

  • Article
  • Open Access

Anticipating the swirl turbulent flow and heat transfer phenomena within a nozzle is tremendously challenging due to the complexities of measurement diagnostics. The amalgamation of nanoparticles with fluids often exacerbates this perplexity for the...

  • Article
  • Open Access
3 Citations
266 Views

The negative impact of actual refrigerants on the environment urged conduct to search for new refrigerants with low global warming potential (GWP). CO2 is one of the promising alternatives; however, its thermodynamic properties impose a transcritical...

  • Article
  • Open Access

Within the vertical 2-Dimensional (2D) asymmetrical model, the blood flow transport through a narrow semicircle shape is the numerical study based on the concept of the electrokinetic flow technique. In this study, the blood flow transport has been c...

  • Article
  • Open Access
1 Citations
159 Views

The linear stability analysis is carried out for the onset of doublediffusive convection in a fluid layer with a boundary slab along with temperature-dependent viscosity and gravity fluctuation. The authors proposed three types of gravity fluctuation...

  • Article
  • Open Access
1 Citations
163 Views

This paper gives the numerical analysis for an electro-osmotic Eyring-Powell fluid flow that is in two dimensions along a stretched sheet. The modified governing equations are resolved by the finite element technique. Graphs are used to display the v...

  • Article
  • Open Access

Free convection of hybrid water/aluminum oxide-copper nanofluid in cubic cavity

  • Dayf Abdellatif,
  • Feddaoui M’barek,
  • Bouchta Said,
  • Hissouf Mohamed and
  • El Ihssini Hossine

Convective heat transfer is a physical phenomenon that continues to attract the interest of researchers in many fields of science and engineering. This work aims at numerically investigating the enhancement of heat transfer in a differentially heated...

  • Article
  • Open Access
1 Citations
159 Views

The influences of the shape of the leading edge of the upstream plate on the transition region from steady laminar flow to unsteady flow, as well as the heat transfer from these leading edges, were numerically studied. The calculations were performed...

  • Article
  • Open Access
3 Citations
182 Views

The swirling nanofluid flow driven by a revolving bottom disk of a cylindrical container under magnetic field effect and temperature gradient is examined in this study. The effects of the electrical conductivity of cylindrical walls' on heat transfer...

  • Article
  • Open Access
1 Citations
183 Views

The onset of double-diffusive surface tension-driven convective motion in a fluid layer overlying a fluid-saturated anisotropic porous layer is investigated analytically in the presence of the soret effect. We considered boundaries to be insulating t...

  • Article
  • Open Access
1 Citations
227 Views

Thermal radiation effect on Non-Newtonian Casson fluid through a porous material over a magnetic field with buoyancy

  • Seun Oyinkansola Mate,
  • Adebowale Martins Obalalu,
  • Olusegun Adebayo Ajala,
  • Toyibat Bamidele Bakare and ,
  • Amos Wale Ogunsola and
  • Akintayo Oladimeji Akindele
  • + 1 author+ 0 author

The magnetohydrodynamic (MHD) chemically reactive of Casson non-Newtonian nanofluid flow on a two-dimensional incompressible steady from stretched sheet in a porous quiescent medium with buoyancy effect is investigated numerically. Additional effects...

  • Article
  • Open Access

Numerical investigation on pressure oscillations in steam condensation from injection of subcooled water

  • Abdul Quddus,
  • Ajmal Shah,
  • Kamran Rasheed Qureshi,
  • Ahmad Tahir and ,
  • Ammar Ahmad,
  • Mazhar Iqbal,
  • M Khawar Ayub and
  • Atif Mehmood
  • + 3 authors+ 0 author
Int. J. Thermofluid Sci. Technol.2023, 10(1), 100101;https://doi.org/10.36963/IJTST.2023100101 
(registering DOI)

25 January 2023

Steam-water direct contact condensation phenomenon is commonly found in many industries like chemical process industry, nuclear industry etc. In this work the injection of subcooled water into a steam filled pipe has been studied computationally. As...

  • Article
  • Open Access
2 Citations
164 Views

The onset of thermocapillary convective motion in a self-rewetting fluid layer overlying a porous medium with thermally dependent surface tension is studied analytically. Surface tension is assumed to be a quadratic function of temperature. The top s...

  • Article
  • Open Access
3 Citations
228 Views

In this investigation, nanofluids including CNT, milled CNT, and decorated Ag/CNT and Cu/CNT have been applied to enhance the thermal performance of a two-phase closed thermosyphon (TPCT). For better dispersing of carbon nanotube (CNT) in water and p...

  • Article
  • Open Access
1 Citations
218 Views

In recent years, energy harvesting from vortex-induced vibration (VIV) of a cylinder as a renewable source of energy has been increased. The main goal is to enhance the harnessed hydrokinetic energy of the VIV converters. In this work, the effect of...

  • Article
  • Open Access
2 Citations
222 Views

Investigation of air and rice husk cold flow structures in the suspension furnace chamber through a simulation study

  • Soen Steven,
  • Linda Windari,
  • Novebriantika Novebriantika,
  • Pasymi Pasymi and ,
  • Elvi Restiawaty and
  • Yazid Bindar
  • + 1 author+ 0 author

Rice husk combustion in the suspension furnace is not an easy matter. Until now, there are still many obstacles faced in its process as characterized by low combustion conversion. The main cause is the poor air-particle contact as well as the probabi...

  • Article
  • Open Access

The main factor for the proper functioning of the thermal generator-bubble pump of the diffusion-absorption cycles is the amount of heat required to maintain the necessary vaporization for pumping fluids. An excess of heat or the opposite reduces its...

  • Article
  • Open Access

On the behavior of the flow field components from the momentum equation for a functioning model of rocket motors

  • Gabriel Kaldjob Pom,
  • Jacques Hona,
  • Valjacques Nyemb Nsoga and
  • Médard Marcus Nganbe II

In this study, a fluid is expelled by the suction process from the intermediate space between to porous plates in transverse movement in order to model the functioning of a compartment of a rocket motor. This transverse motion of the plates can reduc...

  • Article
  • Open Access

An influence of the electrostatic precipitator process was numerically investigated for heat transfer enhancement on saturated porous samples in a k-ε turbulent model. The condition of the water entering a test section was the inlet temperature was 3...

  • Article
  • Open Access
1 Citations
181 Views

A very simple and economical device used for harnessing freely available energy from sun is solar air heater. But these solar air heaters are inefficient due to the low co-efficient of heat of air. Making artificially rough absorber plate is very com...

  • Article
  • Open Access
2 Citations
190 Views

Study of flow fluctuation in the thermal bubble pump tube

  • Ali Benhmidene,
  • Rabeb Jemaii,
  • Khaoula Hidouri and
  • Bechir Chaouachi

In the present work, we were interested in the study of the oscillatory phenomenon of ammonia-water two-phase flow inside the bubble pump of absorption-diffusion refrigerators. In fact, flow instability can reduce the efficiency of the bubble pump. T...

  • Article
  • Open Access

In this paper, a critical mass flow rate (CMFR) has been obtained for three different steam generators (i.e. two marine-type and one commercial) at different inlet void fractions using the CFD method to study the sustainability of natural circulation...

  • Article
  • Open Access

CFD Analysis to Predict Flow Behavior for Design and Operation of Tarbela Dam Reservoir for Different Environmental Conditions

  • Muhammad Abid,
  • Muftooh Ur Rehman Siddiqi,
  • Adnan Aslam Noon,
  • Muhammad Tahir and ,
  • Aamer Sharif,
  • Shahana Mujeeb Siddiqi,
  • Naveed Ullah,
  • Tufail Habib and
  • Muhammad Shayan
  • + 4 authors+ 0 author

Tarbela Dam is one of the world largest filled dams with a capacity of 13.69 km³. It is the backbone of Pakistan, and it is used for both power generation and irrigation. Like all dam reservoirs, sedimentation decreases the life of the Tarbela dam re...

XFacebookLinkedIn
Int. J. Thermofluid Sci. Technol. - ISSN 3043-1107