Materials, Volume 15, Issue 12

Damage in the Peripheral Nervous System (PNS) is related to numerous neurodegenerative diseases and has consequently drawn the attention of Tissue Engineering (TE), which is considered a promising alternative to already established methods such as su...

The martensitic phase transformation (MPT) is one of the most important factors that enhances the surface roughening of stainless-steel thin metal foils (TMF), such as SUS 304, compared to others without MPT, even in the same plastic strain. However,...

The aim of the present study was to evaluate the effect of brushing with two whitening dentifrices (Colgate Optic White (COW) and Colgate Optic White Charcoal (COC)) on surface gloss, micro-roughness, and micro-hardness of nanostructured hybrid conve...

The production of high-performance, low-cost warm mix additives (WMa) for matrix asphalt remains a challenge. The pyrolysis method was employed to prepare wax-based WMa using waste polypropylene plastic (WPP) as the raw material in this study. Penetr...

In this paper, the corrosion resistance and mechanical properties of the 7075 aluminum alloy are studied. The alloy was deformed by hydrostatic extrusion and then aged both naturally and artificially. Results are compared with those of coarse-grained...

This paper focuses on the effect of gear steel on distortion due to phase transformation in carburizing and quenching. The carburizing and quenching process of C-rings under suspension was studied by using the finite element method based on the therm...

Brownmillerite-belite-sulfoaluminate clinker with different contents of brownmillerite were designed and successfully prepared by using limestone (LS), aluminum tailings (AT), aluminum mine (AM), and anhydrite (AH) calcined at 1330 °C for 30 min....

In this manuscript, we discuss our approach to developing novel patient-specific total TMJ prostheses. Our unique patient-fitted designs based on medical images of the patient’s TMJ offer accurate anatomical fit, and better fixation to host bon...

The main aim of this work is to improve the structure and properties of the magnesium alloy ML5 by modifying it with alkaline earth metals (ALM). The separate and joint influence of calcium and barium on the macrostructure and microstructure of the a...

The high-value utilization of sulfate-rich tailings (SRCTs) can accelerate their mass consumption, so the many problems caused by the massive accumulation of SRCTs can be alleviated, such as environmental pollution, land occupation, security risk, et...