Search Results (129)

Pharmaceuticals such as paracetamol and diclofenac (DCF) are among the most extensively consumed drugs worldwide and are continuously released into municipal and hospital wastewater due to incomplete human metabolism. Their persistent presence in aquatic environments, typically ranging from ng/L to µg/L, raises concerns due to endocrine disruption, chronic toxicity, and the promotion of antimicrobial resistance. Conventional wastewater treatment plants (WWTPs) remove 70–90% of ACT but less than 30% of DCF, primarily because these systems were not designed to target low-concentration, recalcitrant micropollutants. As a result, pharmaceuticals frequently pass into treated effluents, highlighting the need for advanced, sustainable, and passive treatment solutions. Permeable reactive barriers (PRBs) have emerged as a promising technology for the interception and removal of pharmaceuticals from both wastewater treatment plant effluents and groundwater. This review provides a comprehensive assessment of ACT and DCF occurrence, environmental behavior, and ecotoxicological risks, followed by a detailed evaluation of PRB performance using advanced reactive media such as geopolymers, activated carbon, carbon nanotubes, and hybrid composites. Reported removal efficiencies exceed 90% for ACT and 70–95% for DCF, depending on media composition and operating conditions. The primary removal mechanisms include adsorption, ion exchange, π–π interactions, hydrogen bonding, and redox transformation. The novelty of this review lies in systematically synthesizing recent laboratory- and pilot-scale findings on PRBs for pharmaceutical removal, identifying critical knowledge gaps—including long-term field validation, media regeneration, and performance under realistic wastewater matrices—and outlining future research directions for scaling PRBs toward full-scale implementation. The study demonstrates that PRBs represent a viable and sustainable tertiary treatment option for reducing pharmaceutical loads in aquatic environments. Full article

Organic micropollutants in agricultural soils pose significant ecological and health risks. This study conducted the first large-scale, integrated non-targeted screening and targeted analysis across China’s major food-producing regions. Using high-resolution mass spectrometry, 498 micropollutants were identified, including pesticides, industrial chemicals, pharmaceuticals, personal care products, food additives, natural products, and emerging contaminants. Spatial analysis revealed strong correlations in pesticide detections between Henan and Hebei, as well as between Hebei and Shandong, indicating pronounced regional similarities in pesticide occurrence patterns. Concentrations of 50 quantified micropollutants showed clear spatial variability, which was associated with precipitation, water use, and agricultural output, reflecting climate–agriculture–socioeconomic synergies. Greenhouse soils accumulated higher micropollutant levels than open fields, driven by intensive agrochemical inputs, plastic-film confinement, and reduced phototransformation. Co-occurrence patterns indicated similar pathways for personal care products, industrial chemicals, and pesticides, whereas natural products and pharmaceuticals showed lower levels of co-occurrence due to crop-specific exudates, fertilization, and rainfall-driven leaching. Among cropping systems, orchard soils had the highest micropollutant accumulation, followed by paddy and vegetable soils, consistent with frequent pesticide use and minimal tillage. Risk quotients indicated moderate-to-high ecological risks at over half of the sites. These results reveal complex soil pollution patterns and highlight the need for dynamic inventories and spatially differentiated, crop- and system-specific mitigation strategies. Full article

Wastewater treatment plants (WWTPs) have been identified as the major sources of contaminants of emerging concern (CECs) in water bodies, as they are not designed to remove organic micropollutants efficiently. Consequently, many technologies have been explored for WWTP upgrading, including activated carbon adsorption. However, the high production cost and environmental challenges associated with activated carbon production limit its application in industrial settings. Therefore, a wide range of alternative materials has been investigated as potential replacements. In this study, biochar produced from waste raspberry biomass was evaluated as an adsorbent for the removal of pharmaceuticals and pesticides quantified in the secondary effluent of municipal WWTP. The results showed that the biochar efficiently removed almost all detected compounds, except for three compounds (clarithromycin, propranolol, and linuron). The wastewater pH (6–8) did not significantly affect removal efficiency significantly, and kinetic tests demonstrated rapid adsorption. The potential for biochar reuse was confirmed through three consecutive batch adsorption cycles. A comparative study between biochar and powdered activated carbon (PAC) revealed some differences in efficiency, primarily attributed to the larger surface area of PAC. π-π interactions, hydrogen bonding, and pore-filling were proposed as possible adsorption mechanisms based on the adsorption efficiency and biochar characterization. Full article

This paper presents a review of current trends and challenges in greywater use in buildings, with particular emphasis on toilet = flushing applications. It discusses the quantitative and qualitative characteristics of greywater, including its generation sources, share in total domestic wastewater volume (50–89%), and flow variability depending on residents, building type, and user habits. Implementation of greywater recycling technologies faces several challenges, such as parameter variability, stringent sanitary and epidemiological standards, and the presence of micropollutants, including pharmaceuticals. Technological barriers include the integration of multi-stage treatment systems (physical, biological, and chemical) and ensuring effective disinfection for indoor use. The paper also highlights the lack of uniform international regulations and the significant variation in recovered water quality requirements. Key physicochemical and microbiological indicators that determine treatment system requirements are presented, with particular emphasis on the removal of organic pollutants and indicator bacteria. Various physical, chemical, and biological treatment technologies are described, with hybrid systems offering high efficiency and user safety. The implementation of greywater recycling systems encounters technical, regulatory, and social barriers. Social acceptance and transparent monitoring are identified as key challenges for widespread adoption. This critical literature review summarises current knowledge on effective greywater management in buildings, representing an increasingly important issue for sustainable water resource management. Full article

This study explores the effectiveness of ultraviolet (UV) irradiation, ozonation (O₃), granular activated carbon (GAC) adsorption, and their combinations (UV/GAC, O₃/GAC) in removing selected pharmaceuticals and common wastewater micropollutants under controlled laboratory-scale conditions. Eight target compounds—candesartan, irbesartan, valsartan, metoprolol, diclofenac, metformin, sucralose, and caffeine—were identified and quantified in real wastewater samples collected from a municipal wastewater treatment plant. Ozonation proved to be the most effective standalone method, achieving complete removal (100%) of five pharmaceuticals and partial removal of sucralose (~60%) and metformin (~17%). The combined O₃/GAC treatment further enhanced overall removal efficiency. In contrast, UV irradiation alone showed limited effectiveness. Importantly, all substances except metformin were fully removed by at least one of the tested methods. These findings underscore the potential of advanced and hybrid treatment technologies—validated here at the laboratory scale—for improving pharmaceutical removal from wastewater and mitigating their environmental impact. Full article

This paper deals with the removal of selected micropollutants from water in the laboratory, namely the removal of pharmaceuticals using the sorption materials Filtrasorb F100 and Filtrasorb F400. A group of well-known and available pharmaceuticals was selected for the experiment, which were the over-the-counter analgesics Ibuprofen, Diclofenac, Naproxen and Paracetamol. The model water was created by mixing drinking water from the water supply system of the city of Brno and standards of these pharmaceuticals prepared in the accredited laboratory of ALS Czech Republic. Water filtration was carried out through two filter columns, each filled with a different type of Filtrasorb sorbent. The filtered water was collected at selected time intervals (1, 2, 4 and 6 min) for analysis. The measurements showed that Filtrasorb F100 and Filtrasorb F400 activated carbons have comparable efficiency for the removal for Ibuprofen, Diclofenac, Naproxen and Paracetamol (around 83%). Both activated carbons have proven to be reliable sorbents for the removal of selected micropollutants from water. Full article

Pharmaceuticals are emerging contaminants of global concern, but their occurrence and removal in semi-arid regions such as Algeria remain poorly documented. This study provides the first systematic evaluation of pharmaceutical and physicochemical parameters in two wastewater treatment plants (WWTPs) in Mascara: an activated sludge system (WWTP-1) and an aerated lagoon system (WWTP-2). Ten pharmaceuticals of different therapeutic classes were quantified using UPLC-HR-QTOF-MS in influent, effluent, and sludge samples, and removal efficiencies were compared using ANOVA and Principal Component Analysis (PCA). WWTP-1 showed higher efficiency, with >90% removal of COD, BOD₅, and ammonium, and near-complete elimination of sulfamethoxazole (99.9%) and atenolol (94%). In contrast, WWTP-2 achieved only moderate reductions (69% COD, 51% BOD₅) and low pharmaceutical removal, with negative efficiencies for persistent compounds such as carbamazepine, diclofenac, and ibuprofen. Weak correlations between macro- and micropollutants indicated that traditional indicators cannot predict pharmaceutical behavior. This work is the first to integrate physicochemical monitoring, pharmaceutical profiling, and multivariate analysis in Algerian WWTPs. The findings highlight the limitations of conventional treatment in semi-arid conditions and provide a critical baseline for adopting advanced technologies to mitigate pharmaceutical pollution in North Africa. Full article

This literature review highlights the latest advances in the use of adsorption materials based on modified chitosan for the purification of aqueous solutions from pharmaceutical residues. Some countries are actively working to detect pharmaceuticals and their metabolites in water samples from natural sources and municipal wastewater, as well as to study their impact on the environment. In this article, adsorbents based on chitosan, a natural, low toxic and biodegradable polymer, are considered as a promising solution to this problem. Due to some disadvantages of pure chitosan (low mechanical strength, small specific surface area), its practical application is limited. One of the ways to overcome them is to create modified materials, such as grafted copolymers, as well as chitosan derivatives and its composites, including those with magnetic nanoparticles and carbon materials. Modification of chitosan makes it possible to achieve an increase in mechanical strength, specific surface area and porosity. The high efficiency of hybrid adsorbents is emphasised, demonstrating high adsorption capacity, reuse ability and selectivity for a wide range of pharmaceutical preparations, including antibiotics. Thus, despite a number of limitations, chitosan-based materials are a promising solution for deep wastewater treatment. Full article

Water pollution from pharmaceutical and textile industries urgently requires effective treatment solutions due to environmental and health risks. Effective treatment methods are desperately needed for water pollution from the textile and pharmaceutical industries because of the dangers to the environment and human health. To treat these micropollutants, the optimized granular activated carbon (OGAC) produced from olive fruit stones was utilized as an adsorbent in this study. The central composite design (CCD) of response surface methodology (RSM) was statistically used to optimize the operating factors for rhodamine B (RhB) and thiamphenicol (THI) removal efficiency on the optimized granular activated carbon. This study evaluated the influence of factors such as the solution’s pH, initial RhB and THI concentration, and OGAC dose, along with their interactions to model outcomes and determined optimal adsorption conditions on OGAC. The adsorption kinetic data will be analyzed using the intra-particle diffusion, pseudo-second-order, and pseudo-first-order models. Equilibrium data will be analyzed using the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms. The adsorption thermodynamics of the various systems under investigation will also be examined. Finally, a study on OGAC regeneration has been conducted. Results showed that THI and RhB removal is primarily influenced by pH, initial pollutant concentration, and dose. RSM indicated the optimal adsorption parameters for THI and RhB on OGAC as pH = 5.7, an initial concentration of C₀ = 2.5 mg/L, and a dose of 6 g/L. The kinetic study revealed that THI and RhB retention on OGAC generally follows a pseudo-second-order kinetic model, indicating chemisorption as the primary mechanism controlling adsorption. The adsorption isotherm data analysis showed that chemisorption has a significant role in the THI and RhB adsorption process on OGAC. Furthermore, thermodynamic parameters suggest that THI adsorption on OGAC is exothermic, while RhB adsorption is endothermic. Activated carbon regeneration tests demonstrated its cost-effectiveness, and activated carbon was successfully regenerated over three cycles, achieving efficiencies of 62.39% for RhB and 59.6% for THI. These results demonstrate that the studied OGAC is an effective adsorbent for THI and RhB removal. Full article

Organic and pharmaceutical pollution of water is a serious problem, particularly when it comes to drinking and groundwater. Although some evaluations indicate that these pollutants are unlikely to be at current exposure levels, they are often detected in aquatic systems and can be harmful to human health. Organic contaminants include hazardous micropollutants, aromatic phenols, pesticides, etc. Pharmaceutical contaminants are sulfamethoxazole, diclofenac, doxycycline, amoxicillin, trimethoprim, ciprofloxacin, norfloxacin, lipid regulators, nonsteroidal anti-inflammatory drugs (NSAIDs), hormones, antidepressants, etc. Hydrogel adsorbents’ distinct structural, chemical, and environmentally benign qualities make them a potential and successful option for environmental remediation, especially in wastewater treatment. In the search for clean water resources, they are an important instrument because of their reusability and capacity to be customized for certain contaminants, such as organic and pharmaceutical pollutants. This review focusses on the present state, adsorption sites and surfaces, different adsorption mechanisms, and the prospects and scope of improvement of effective hydrogels for eliminating dangerous aqueous organic and pharmaceutical contaminants. It offers a thorough summary of the area, highlighting its facets and potential paths forward. Full article

The presence of ibuprofen (IBP) and paracetamol (PAR) contaminants in wastewater has become an emerging issue. Traditional wastewater treatment facilities have not been adequately upgraded to remove these micropollutants. This study focused on screening and identifying effective rhizobacteria capable of assisting plants in eliminating ibuprofen and paracetamol from wastewater using constructed wetlands. A total of 28 rhizobacteria were isolated from both the roots and the surrounding sand of Scirpus grossus after 30 days of pharmaceutical exposure. Among these, three isolates (Gram-negative Enterobacter aerogenes, Gram-positive Bacillus flexus, and Paenibacillus alvei) showed high tolerance to IBP and PAR with initial removal efficiencies > 75%. The addition of these three isolated rhizobacteria to a constructed wetland (planted with Scirpus grossus, 5-day HRT, 2 L/min aeration) assists the removal of IBP and PAR from wastewater. Bioaugmentation of rhizobacteria showed an increment of IBP removal (↑13%) from water (residual of 10 µg/L) and PAR (↑20%) from sand (residual 2.3 µg/L) as compared to the non-bioaugmented systems. The addition of rhizobacteria also showed the ability to significantly enhance the translocation of PAR into the shoot system of S. grossus, suggesting assisted phytoextraction mechanisms, while the removal of IBP in wetlands is suggested to occur via rhizodegradation. It is recommended that future research be conducted to elucidate the microbial degradation pathways and analyze the intermediate metabolites to accurately depict the pharmaceutical degradation mechanisms and evaluate their ecological risks. Full article

The increasing use of pharmaceutically active compounds (PhACs), endocrine-disrupting compounds (EDCs), and personal care products (PCPs) has led to the widespread presence of organic micropollutants (OMPs) in aquatic environments, posing a significant global challenge for environmental conservation. In recent years, advanced materials-based nanofiltration (NF) technologies have emerged as a promising solution for water and wastewater treatment. This review begins by examining the sources of OMPs, as well as the risk of OMPs. Subsequently, the key criteria of NF membranes for OMPs are discussed, with a focus on the roles of pore size, charge property, molecular interaction, and hydrophilicity in the separation performance. Against that background, this review summarizes and analyzes recent advancements in materials such as metal organic frameworks (MOFs), covalent organic frameworks (COFs), graphene oxide (GO), MXenes, hybrid materials, and environmentally friendly materials. It highlights the porous nature and structural diversity of organic framework materials, the advantage of inorganic layered materials in forming controllable nanochannels through stacking, the synergistic effects of hybrid materials, and the importance of green materials. Finally, the challenges related to the performance optimization, scalable fabrication, environmental sustainability, and complex separation of advanced materials-based membranes for OMP removal are discussed, along with future research directions and potential breakthroughs. Full article

Concern over the presence of pharmaceutical waste in the environment has prompted research into the management of emerging organic micropollutants (EOMs). In response, sustainable technologies have been applied as alternatives to reduce the effects of these contaminants. This study investigated the capacity of filamentous fungi isolated from iron mine soil in the Amazon region to biodegrade the drug chloroquine diphosphate. An initial screening assessed the growth of four fungal strains on solid media containing chloroquine diphosphate: Trichoderma pseudoasperelloides CBMAI 2752, Penicillium rolfsii CBMAI 2753, Talaromyces verruculosus CBMAI 2754, and Penicillium sp. cf. guaibinense CBMAI 2758. Among them, Penicillium sp. cf. guaibinense CBMAI 2758 was selected for further testing in liquid media. A Box–Behnken factorial design was applied with three variables, pH (5, 7, and 9), incubation time (5, 10, and 15 days), and chloroquine diphosphate concentration (50, 75, and 100 mg·L⁻¹), totaling 15 experiments. The samples were analyzed by gas chromatography–mass spectrometry (GC-MS). The most effective conditions for chloroquine biodegradation were pH 7, 100 mg·L⁻¹ concentration, and 10 days of incubation. Four metabolites were identified: one resulting from N-deethylation M1 (N4-(7-chloroquinolin-4-yl)-N1-ethylpentane-1,4-diamine), two from carbon–carbon bond cleavage M2 (7-chloro-N-ethylquinolin-4-amine) and M3 (N1,N1-diethylpentane-1,4-diamine), and one from aromatic deamination M4 (N1-ethylbutane-1,4-diamine) by enzymatic reactions. The toxicity analysis showed that the products obtained from the biodegradation of chloroquine were less toxic than the commercial formulation of this compound. These findings highlight the biotechnological potential of Amazonian fungi for drug biodegradation and decontamination. Full article

In response to the European Union’s revised Urban Wastewater Treatment Directive, which mandates enhanced monitoring and advanced treatment of micropollutants, this study was conducted. It took place within the Coastal Landscape Park (CLP), a Natura 2000 protected area in northern Poland. The focus was on the municipal wastewater treatment plant in Jastrzębia Góra, located in a region exposed to seasonal tourist pressure and discharging effluent into the Czarna Wda River. A total of 90 wastewater samples were collected during five monitoring campaigns (July, September 2021; February, May, July 2022) and analysed for 13 pharmaceuticals and personal care products (PPCPs) using ultra-high-performance liquid chromatography tandem mass spectrometry with electrospray ionisation (UHPLC-ESI-MS/MS). The monitoring included both untreated (UTWW) and treated wastewater (TWW) to assess the PPCP removal efficiency and persistence. The highest concentrations in the treated wastewater were observed for metoprolol (up to 472.9 ng/L), diclofenac (up to 3030 ng/L), trimethoprim (up to 603.6 ng/L) and carbamazepine (up to 2221 ng/L). A risk quotient (RQ) analysis identified diclofenac and LI-CBZ as priority substances for monitoring. Multivariate analyses (PCA, HCA) revealed co-occurrence patterns and seasonal trends. The results underline the need for advanced treatment solutions and targeted monitoring, especially in sensitive coastal catchments with variable micropollutant presence. Full article