The use of modern synthetic materials is an important element in the development of railway tracks. Their use is a response to the growing requirements regarding the durability of structures and environmental protection against traffic noise and vibr...
In view of the problem that anchored bedding rock material is prone to instability and failure under impact loading in the process of deep coal mining, and taking the lower roadway of a deep 2424 coal working face in the Suncun coal mine as the engin...
With a Euler–Euler (E2P) approach, a mathematical model for predicting the pointwise hydrodynamic behavior of a spouted bed was implemented though computational fluid dynamics (CFD) techniques. The model considered a bed elasticity approach in...
In order to investigate the vibration characteristics of a composite sleeper-ballasted track and provide a basis for further popularization, a vehicle–track dynamic coupling model is established and the viscoelastic properties of the composite...
The Young’s modulus and Poisson’s ratio, parameters reflecting the elastic response of a rock to stress, are the key parameters used in many engineering activities, such as hard coal mining and natural gas extraction. The objective of thi...
Modern 3D printed components are finding applications in dynamic structures. These structures are often subject to dynamic loadings. To date, research has mostly focused on investigating the mechanical properties of these 3D printed structures with m...
Commercial filaments of poly(lactic acid) (PLA) composites with particulate filler, carbon fiber, and copper powder with different contents were fabricated by FDM 3D printing in XZ-direction at bed temperatures of 45 °C and 60 °C. The effects...
The stress-distribution angle is an important parameter for the design of retaining walls and foundation beds and has a non-negligible role in the rationality of engineering design. There is a lack of research on stress distribution in reinforced ear...
We compare different lattice structures with various elementary cell sizes built by laser powder bed fusion with and without hot isostatic pressing as post treatment. Cylindrical lattice structures are mechanically tested upon static and dynamic load...
Accurately determining the natural frequency of coal-containing geological structures is crucial for preventing mine dynamic disasters and utilizing vibration waves to break coal and enhance its permeability. Based on the modal theory of rock, vibrat...
This study investigates the effect of a tantalum addition and lattice structure design on the mechanical and antibacterial properties of Ti-6Al-4V alloys. TPMS lattice structures, such as Diamond, Gyroid, and Primitive, were generated by MSLattice 1....
Additive manufacturing enables the fabrication of lightweight structures with complex geometries, offering significant potential in aerospace and biomedical applications. Triply periodic minimal surface (TPMS) lattice structures are of particular int...
Polymeric composites such as Poly-ether-ether-ketone (PEEK)/carbon fiber (CF) have been widely utilized due to outstanding performances such as high specific strength and specific modulus. The PEEK/CF components via powder bed fusion additive manufac...
Laser Powder Bed Fusion (LPBF) is a widely used additive manufacturing technique for powder-based polymers and metallic materials. Thermoplastics like Polyamide 12 and Polyamide 6 are commonly used in LPBF; thermosetting polymers are gaining attentio...
Auxetic structures have attracted attention in energy absorption applications owing to their improved shear modulus and enhanced resistance to indentation. On the other hand, four-dimensional (4D) printing is an emerging technology that is capable of...