This article presents a wear study of Ni–Al2O3 nanocomposite coatings in comparison to uncoated steel contacts under reciprocating motion. A ball-on-flat type contact configuration has been used in this study in which a reciprocating flat steel...
Ni-W-Al2O3 nanocomposite coatings were fabricated using ultrasonic-assisted jet electrodeposition (UAJED) to improve the wear resistance of agricultural machinery parts. To find the best combination of process parameters, the response surface plotter...
In this study, the viability of duty cycle variation was explored as a potential method to improve the mechanical and surface roughness properties of Ni-Al2O3 nanocoatings through pulse electrodeposition. The areal and surface roughness properties of...
A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electroc...
In this study, Ni–Co–P–BN(h)–Al2O3 binary nanocomposite coatings were fabricated on steel C1045 substrates by jet electrodeposition. The samples were then processed using self-made laser processing equipment to investigate the...
High phosphorus Ni-P coatings, both unreinforced and modified by the addition of alumina (Al2O3) and zirconia (ZrO2) nanoparticles, were manufactured by electroless deposition technique and heat-treated with different temperature and duration schedul...
Research into the introduction of alloying and reinforcing nanocomposites into nickel (Ni) coatings has been motivated by the need for tribologically superior coatings that will improve energy efficiency. Using pulse electrodeposition, this work inve...
In this paper, an Al2O3 coated CaF2 (CaF2@Al2O3) nanocomposite powder is used as the additive phase of a Ti(C,N)-based self-lubricating cermet material. A novel self-lubricating ceramic material with a multilayer core–shell microstructure was p...
The present investigation is a comparison study of two nanocomposites: Nano-silica-coated oxyhydroxide aluminum (SiO2–AlOOH; SCB) and nano-silica-coated oxyhydroxide aluminum doped with polyaniline (SiO2–AlOOH–PANI; SBDP). The prepa...
Real-time sensing of hydrogen sulfide (H2S) at room temperature is important to ensure the safety of humans and the environment. Four kinds of different nanocomposites, such as MXene Ti3C2Tx, Ti3AlC2, WS2, and MoSe2/NiCo2O4, were synthesized using th...
In this work, an efficient nanocatalyst was developed based on nanoadsorbent beads. Herein, carboxymethyl cellulose–copper oxide-cobalt oxide nanocomposite beads (CMC/CuO-Co2O3) crosslinked by using AlCl3 were successfully prepared. The beads w...
Membrane reactors (MR) with an appropriate catalyst are considered to be an innovative and intensified technology for converting a fuel into the hydrogen-rich gas with the simultaneous recovery of high-quality hydrogen. Characteristics of an asymmetr...