Editorial Board
- Extractive Metallurgy Section
- Powder Metallurgy Section
- Corrosion and Protection Section
- Biobased and Biodegradable Metals Section
- Metal Casting, Forming and Heat Treatment Section
- Additive Manufacturing Section
- Metal Failure Analysis Section
- Computation and Simulation on Metals Section
- Entropic Alloys and Meta-Metals Section
- Welding and Joining Section
- Structural Integrity of Metals Section
- Metal Matrix Composites Section
- Crystallography and Applications of Metallic Materials Section
- Metallic Functional Materials Section
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
Department of Materials, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK
Interests: metals; metallography; microstructure evolution and control; high temperature oxidation; metals for conventional power plant; electron backscatter diffraction; SEM/TEM; aluminium; steel; stainless steel
Interests: metals; metallography; microstructure evolution and control; high temperature oxidation; metals for conventional power plant; electron backscatter diffraction; SEM/TEM; aluminium; steel; stainless steel
Institute of Industrial Nanomaterials, Kumamoto University, Kumamoto 860-8555, Japan
Interests: explosive welding; joining of dissimilar materials; high-rate material processing; synthesis of new materials
Special Issues, Collections and Topics in MDPI journals
Interests: explosive welding; joining of dissimilar materials; high-rate material processing; synthesis of new materials
Special Issues, Collections and Topics in MDPI journals
Department of Chemical and Metallurgical Engineering, Aalto University, P.O. Box 16100, FI-00076 AALTO, Espoo, Finland
Interests: fundamentals of metallurgical processes; sustainability in steel production; converter processes; clean steel production; inclusion engineering; Tundish metallurgy; slag chemistry
Special Issues, Collections and Topics in MDPI journals
Interests: fundamentals of metallurgical processes; sustainability in steel production; converter processes; clean steel production; inclusion engineering; Tundish metallurgy; slag chemistry
Special Issues, Collections and Topics in MDPI journals
Department of Physics, Norwegian University of Science and Technology (NTNU), Høgskoleringen 5, 7491 Trondheim, Norway
Interests: electron microscopy and spectroscopy (TEM, HREM, EDS, EELS, STEM); electron diffraction; quantitative convergent beam electron Diffraction (CBED), electron crystallography, scanning precession electron diffraction (SPED); microstructure characterization of inorganic materials, alloys and intermetallics, precipitation in aluminium alloys, functional oxides, solar cell materials, relationships between micro/nano-structure and properties of materials, bonding; modelling and simulations in materials physics; solid state calculations
Interests: electron microscopy and spectroscopy (TEM, HREM, EDS, EELS, STEM); electron diffraction; quantitative convergent beam electron Diffraction (CBED), electron crystallography, scanning precession electron diffraction (SPED); microstructure characterization of inorganic materials, alloys and intermetallics, precipitation in aluminium alloys, functional oxides, solar cell materials, relationships between micro/nano-structure and properties of materials, bonding; modelling and simulations in materials physics; solid state calculations
Department of Materials Science and Engineering Institute I, Universität Erlangen-Nürnberg, Martensstrasse 5, 91058 Erlangen, Germany
Interests: fatigue mechanisms of metallic materials; mechanical properties and their correlation to microstructure; in-situ deformation; nano-crystalline /ultrafine grained materials; light metals
Special Issues, Collections and Topics in MDPI journals
Interests: fatigue mechanisms of metallic materials; mechanical properties and their correlation to microstructure; in-situ deformation; nano-crystalline /ultrafine grained materials; light metals
Special Issues, Collections and Topics in MDPI journals
School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China
Interests: advanced materials; microstructure; properties
Special Issues, Collections and Topics in MDPI journals
Interests: advanced materials; microstructure; properties
Special Issues, Collections and Topics in MDPI journals
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China
Interests: superalloys; intermetallics; metal matrix composites; phase transformation and solidification
Interests: superalloys; intermetallics; metal matrix composites; phase transformation and solidification
College of Materials Science and Engineering, Hunan University, Changsha 410082, China
Interests: analytic embedded atom potentials and Atomistic computer simulation (MD and MC); lattice defects; nanostructured metals and alloys; surface segregation, adsorption, and catalysis; light elements in metals and alloys; thermal barrier coatings
Special Issues, Collections and Topics in MDPI journals
Interests: analytic embedded atom potentials and Atomistic computer simulation (MD and MC); lattice defects; nanostructured metals and alloys; surface segregation, adsorption, and catalysis; light elements in metals and alloys; thermal barrier coatings
Special Issues, Collections and Topics in MDPI journals
School of Advanced Manufacturing, Nanchang University, No. 999, Xuefu Road, Nanchang, China
Interests: lead-free solder joint; interfacial reaction; intermetallic compounds; reliability; fracture of joints; phase change materials; thermal energy storage; thermal management
Special Issues, Collections and Topics in MDPI journals
Interests: lead-free solder joint; interfacial reaction; intermetallic compounds; reliability; fracture of joints; phase change materials; thermal energy storage; thermal management
Special Issues, Collections and Topics in MDPI journals
School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Interests: metal materials and their thermal processing
Special Issues, Collections and Topics in MDPI journals
Interests: metal materials and their thermal processing
Special Issues, Collections and Topics in MDPI journals
School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
Interests: metal matrix composites; powder metallurgy; 3D printing; titanium alloys
Interests: metal matrix composites; powder metallurgy; 3D printing; titanium alloys
Department of Chemistry, Biochemistry, and Physics, Université du Québec à Trois-Rivières, Trois-Rivières, QC G9A 5H7, Canada
Interests: metal-hydrogen interactions; hydrogen storage; hydrogen diffusion; material characterization
Special Issues, Collections and Topics in MDPI journals
Interests: metal-hydrogen interactions; hydrogen storage; hydrogen diffusion; material characterization
Special Issues, Collections and Topics in MDPI journals
Department of Civil and Mechanical Engineering, Universita di Cassino e del Lazio Meridionale, 03043 Cassino, Italy
Interests: fatigue crack propagation micromechanisms of stainless steels, ductile cast irons, Al and Ti alloys; hydrogen embrittlement of stainless steels
Special Issues, Collections and Topics in MDPI journals
Interests: fatigue crack propagation micromechanisms of stainless steels, ductile cast irons, Al and Ti alloys; hydrogen embrittlement of stainless steels
Special Issues, Collections and Topics in MDPI journals
Director of Fatigue & Stress Analysis Laboratory, Department of Mechanical & Mechatronics Engineering, University of Waterloo, 200 University Ave West, Waterloo, Ontario N2L3G1, Canada
Interests: multi-axial fatigue; fatigue of magnesium alloys; cyclic plasticity; cold spray coating
Special Issues, Collections and Topics in MDPI journals
Interests: multi-axial fatigue; fatigue of magnesium alloys; cyclic plasticity; cold spray coating
Special Issues, Collections and Topics in MDPI journals
Materials and Process Sciences and Engineering, Universite Grenoble Alpes, 38402 Saint Martin d'Heres, France
Interests: liquid alloy; thermodynamics; structural properties
Interests: liquid alloy; thermodynamics; structural properties
Faculty of Mathematics and Physics, Charles University, 121 16 Praha, Czech Republic
Interests: transmission and scanning electron microscopy; microstructure and mechanical properties of Al and Mg based alloys; materials with submicrocrystalline and nanocrystalline structure; structure and properties of grain boundaries
Interests: transmission and scanning electron microscopy; microstructure and mechanical properties of Al and Mg based alloys; materials with submicrocrystalline and nanocrystalline structure; structure and properties of grain boundaries
Department of Materials and Manufacturing, School of Engineering, Jönköping University, 55111 Jönköping, Sweden
Interests: casting; aluminium; magnesium; heat treatment; mechanical behavior; fatigue; process microstructure performance; additive manufacturing
Special Issues, Collections and Topics in MDPI journals
Interests: casting; aluminium; magnesium; heat treatment; mechanical behavior; fatigue; process microstructure performance; additive manufacturing
Special Issues, Collections and Topics in MDPI journals
School of Mechanical and Vehicle Engineering, Hunan University, Changsha 410082, China
Interests: structural strength design; failure analysis; structural lifetime prediction; damage mechanism
Interests: structural strength design; failure analysis; structural lifetime prediction; damage mechanism
State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
Interests: magnesium and aluminum alloys; metal matrix composites; casting technology; solidification microstructure control; 3D printing technology
Special Issues, Collections and Topics in MDPI journals
Interests: magnesium and aluminum alloys; metal matrix composites; casting technology; solidification microstructure control; 3D printing technology
Special Issues, Collections and Topics in MDPI journals
School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, NSW 2522, Australia
Interests: numerical simulation of metal forming; tribology in metal forming; multi-scale materials processing; advanced rolling technology; microforming; manufacturing of composites; contact mechanics; friction and wear in manufacturing; lubrication technology; development of novel lubricants
Special Issues, Collections and Topics in MDPI journals
Interests: numerical simulation of metal forming; tribology in metal forming; multi-scale materials processing; advanced rolling technology; microforming; manufacturing of composites; contact mechanics; friction and wear in manufacturing; lubrication technology; development of novel lubricants
Special Issues, Collections and Topics in MDPI journals
Materials Performance Centre, School of Materials, The University of Manchester, Manchester M13 9PL, United Kingdom
Interests: nuclear reactor materials; radiation damage; lattice defect structures; phase stability; micro-mechanics; high-temperature testing; structural integrity; neutron and high-energy synchrotron X-ray scattering; electron microscopy; energetic particle-solid interactions
Special Issues, Collections and Topics in MDPI journals
Interests: nuclear reactor materials; radiation damage; lattice defect structures; phase stability; micro-mechanics; high-temperature testing; structural integrity; neutron and high-energy synchrotron X-ray scattering; electron microscopy; energetic particle-solid interactions
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway
Interests: material technology for the oil industry; corrosion of metallic materials for the process industry; corrosion protection by cathodic protection and/or coating; corrosion, erosion, and wear resistance
Special Issues, Collections and Topics in MDPI journals
Interests: material technology for the oil industry; corrosion of metallic materials for the process industry; corrosion protection by cathodic protection and/or coating; corrosion, erosion, and wear resistance
Special Issues, Collections and Topics in MDPI journals
School of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT UK
Interests: electron microscopy; ordered alloys; micro-mechanical testing; radiation damage
Interests: electron microscopy; ordered alloys; micro-mechanical testing; radiation damage
Institute of Materials Science and Engineering, Poznan University of Technology, M.Sklodowska-Curie 5 Sq., 60-965 Poznan, Poland
Interests: nanostructured materials; non-equilibrium processing and properties of advanced materials/nanomaterials; microstructural characterization; powder processing; composites/nanocomposites; porous metallic bionanomaterials/bionanocomposites; hydrogen storage materials/nanomaterials
Special Issues, Collections and Topics in MDPI journals
Interests: nanostructured materials; non-equilibrium processing and properties of advanced materials/nanomaterials; microstructural characterization; powder processing; composites/nanocomposites; porous metallic bionanomaterials/bionanocomposites; hydrogen storage materials/nanomaterials
Special Issues, Collections and Topics in MDPI journals
School of Metallurgy, Northeastern University, Shenyang 110819, China
Interests: green and sustainable production of advanced materials; materials for energy storage and environmental protection; molten salt science and technology
Special Issues, Collections and Topics in MDPI journals
Interests: green and sustainable production of advanced materials; materials for energy storage and environmental protection; molten salt science and technology
Special Issues, Collections and Topics in MDPI journals
Pusan National University, Graduate School of Convergence Science, Busan, Korea
Interests: Hybrid surface/bulk/powder Materials; Conductive composites; Machinable composites; Porous composites; Surface coating materials; HIPIMS; Hybrid Coating System; Super Hard Coating; Machining process (Milling, Drilling, EDM, ECM, Laser); Friction Stir welding; Hybrid machining process
Interests: Hybrid surface/bulk/powder Materials; Conductive composites; Machinable composites; Porous composites; Surface coating materials; HIPIMS; Hybrid Coating System; Super Hard Coating; Machining process (Milling, Drilling, EDM, ECM, Laser); Friction Stir welding; Hybrid machining process
Associate Professor, Director of Graduate Studies, Department of Mechanical Engineering, University of Kentucky, 263 RGAN Building, Lexington, KY 40506-0503, USA
Interests: shape memory alloys, shape memory polymers, Composition-processing-microstructure-mechanical property relationships, phase transformations, mechanical properties, microstructural characterization
Interests: shape memory alloys, shape memory polymers, Composition-processing-microstructure-mechanical property relationships, phase transformations, mechanical properties, microstructural characterization
Department of Materials Science and Engineering, Texas A&M University, 235 Reed McDonald Building, College Station, TX 77843-3123, USA
Interests: shape memory alloys; martensitic transformation; ultrafine grain materials; nanocrystalline materials; magnetic shape memory alloys; microstructural design
Interests: shape memory alloys; martensitic transformation; ultrafine grain materials; nanocrystalline materials; magnetic shape memory alloys; microstructural design
Department of Nanotechnology and Advanced Materials Engineering, Sejong University, Seoul 05006, Republic of Korea
Interests: corrosion matter of protective metallic materials via plasma electrolysis; surface modification via organic–inorganic conjugation; electrochemical interpretation per equivalent circuit model; plasticity control and mechanical modeling of nanostructured crystalline solid; biodegradable polymers; development of bioactive coatings on metallic materials
Special Issues, Collections and Topics in MDPI journals
Interests: corrosion matter of protective metallic materials via plasma electrolysis; surface modification via organic–inorganic conjugation; electrochemical interpretation per equivalent circuit model; plasticity control and mechanical modeling of nanostructured crystalline solid; biodegradable polymers; development of bioactive coatings on metallic materials
Special Issues, Collections and Topics in MDPI journals
Choong Hoon Cho Chair and Professor of Chemical Engineering and Materials Science and Aerospace and Mechanical Engineering, University of Southern California, RTH 502, Los Angeles, CA 90089, USA
Interests: plasticity in metals, including creep, internal stresses, large-strain deformation; additive manufacturing; solid state joining
Interests: plasticity in metals, including creep, internal stresses, large-strain deformation; additive manufacturing; solid state joining
