Materials

Laser Manufacturing and Material Modification

edited by

Ye Ding

,

Zhengjie Fan

and

Yanan Liu

submission deadline 20 May 2026 | Viewed by 92 | Submission Open

Keywords: short/ultrashort-pulse laser manufacturing; laser-assisted hybrid manufacturing; laser-induced material modification; laser-manufactured micro/nanodevice; development of novel laser manufacturing technology; laser– material interaction mechanism

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Materials and Technologies for Saggar Manufacturing, Recycling, and Sustainable Utilization of Lithium/Sodium-Based Resources

edited by Zhenhua Sun and

Aolei Gao

submission deadline 20 May 2026 | Viewed by 91 | Submission Open

Keywords: saggar manufacturing and recycling; lithium-ion battery cathode materials; sodium-ion battery materials; lithium-bearing mineral utilization; solid waste resource recovery; circular economy; high-temperature materials; sustainable energy materials; waste valorization; green processing technologies

(This special issue belongs to the Section Green Materials)

Synthesis and Applications in Magnetic Nanostructures

edited by Ningning Song and Jialong Liu

submission deadline 20 May 2026 | Viewed by 85 | Submission Open

Keywords: magnetic nanoparticles; ferrite nanoparticles; magnetic alloy; nanobiotechnology; intelligent nanomaterials

(This special issue belongs to the Section Advanced Nanomaterials and Nanotechnology)

Advances in Phase Change Materials: Properties, Preparation, and Applications

edited by

Fei Zhang

and Yinhang Zhang

submission deadline 20 May 2026 | Viewed by 84 | Submission Open

Keywords: phase change materials (PCMs); thermal energy storage; composite PCMs; thermal conductivity; nanocomposites; building energy efficiency; photothermal storage and controlled release; phase transition mechanisms

(This special issue belongs to the Section Energy Materials)

Metallic and Ceramic Materials Integrity—Surface Engineering for Wear, Corrosion and Erosion Prevention (3rd Edition)

edited by

Mirosław Szala

and

Mariusz Walczak

submission deadline 20 May 2026 | Viewed by 82 | Submission Open

Keywords: wear; tribology and friction; erosion and corrosion phenomena; wear behavior and wear mechanisms; additive manufacturing technology; hardfacing; cladding and overlay welding; surface engineering and laser surfacing; thermal spraying; PVD thin-film deposition; ion implantation; shot peening and cold working processing; artificial neural network; computational simulations

(This special issue belongs to the Section Corrosion)

Advanced Manufacturing of Aerospace-Grade Materials

edited by

Logesh Shanmugam

and

Kazi Zahir Uddin

submission deadline 20 May 2026 | Viewed by 82 | Submission Open

Keywords: additive manufacturing (AM); laser powder bed fusion (LPBF); directed energy deposition (DED); automated fiber placement (AFP); automated tape laying (ATL); out-of-autoclave (OOA); liquid composite molding (LCM); hybrid manufacturing; advanced joining technologies; process optimization; monitoring; and control; in-situ process monitoring and real-time control; process parameter optimization; cure cycle simulation and optimization for thermoset composites; process modeling and computational manufacturing; manufacturing induced properties & quality; process-induced defects; residual stress; microstructure control; non-destructive evaluation (NDE) for manufactured components

(This special issue belongs to the Section Manufacturing Processes and Systems)

High-Temperature Inorganic Oxygen/Hydrogen Permeable Membranes: From Material Design to Industrial Applications

edited by

Guangru Zhang

submission deadline 20 May 2026 | Viewed by 75 | Submission Open

Keywords: ceramic oxygen-permeable membrane; hydrogen separation membrane; high-temperature stability; perovskite materials; hollow fiber membranes; membrane catalytic reactor; plasma catalysis; electrocatalysis; industrial oxygen production; syngas conversion

(This special issue belongs to the Section Thin Films and Interfaces)

Emerging Functionalities and Device Applications of Two-Dimensional Materials for Sustainable Technologies

edited by Muhammad Hilal

submission deadline 20 May 2026 | Viewed by 73 | Submission Open

Keywords: 2D materials; MXenes; heterostructures; transition metal dichalcogenides; energy storage; flexible electronics; electrochemical sensors; interface engineering; nanostructured materials; sustainable technologies

(This special issue belongs to the Section Materials Chemistry)

From Lab to Industry: Structure, Durability, and Cost in Next-Generation Water-Splitting Catalysts

edited by

Israr Ul Hassan

and

Gowhar Ahmad Naikoo

submission deadline 20 May 2026 | Viewed by 72 | Submission Open

Keywords: 2D materials; nanoporous materials; MXenes; single-atom sites; high-entropy alloys; durability and scalability; electrolysis; water splitting; green hydrogen production

(This special issue belongs to the Section Catalytic Materials)

Thermal Management Functional Composites: Mechanism, Design, Performance and Application

edited by Duo Pan

submission deadline 20 May 2026 | Viewed by 71 | Submission Open

Keywords: thermal management; structural design; multi-scale synthesis; thermal conduction; thermal insulation; thermal conversion; radiative cooling; aerogel-based composites; heat transfer mechanism; performance optimization

(This special issue belongs to the Section Advanced Composites)

Advancements in Perovskite Solar Cells for Improved Energy Efficiency

edited by Mykhailo Solovan

submission deadline 20 May 2026 | Viewed by 68 | Submission Open

Keywords: perovskite solar cells; hybrid materials; interface engineering; stability; defect passivation; radiation resistance; charge transport; tandem photovoltaics; scalable fabrication; optoelectronic devices

(This special issue belongs to the Section Energy Materials)

Advances in Functional Photoactive Materials and Their Applications

edited by Stela Minkovska

submission deadline 20 May 2026 | Viewed by 67 | Submission Open

Keywords: functional photoactive materials; photosensitive and photoswitchable systems; fluorescent; phosphorescent; and electroluminescent materials; photochromic and stimuli-responsive compounds; smart optoelectronic; photonic devices; light– matter interaction; high-resolution imaging nanoparticles

(This special issue belongs to the Section Optical and Photonic Materials)

Advances in Functional Polymers and Nanocomposites (Second Edition)

edited by

Przemysław Pączkowski

and

Barbara Gawdzik

submission deadline 20 May 2026 | Viewed by 63 | Submission Open

Keywords: polymer composites; nanocomposites; advanced polymers; functional polymers; properties and structure of functional polymer composites; degradation and stability of polymer composites

(This special issue belongs to the Section Advanced Composites)

High Entropy Alloys, Refractory Materials and Advanced Metallic Materials: Mechanical Properties and Applications

edited by Yafei Pan,

Fenghua Luo

and Siyao Xie

submission deadline 20 May 2026 | Viewed by 62 | Submission Open

Keywords: high-entropy alloys; refractory metals; mechanical properties; high-temperature applications; spark plasma sintering; additive manufacturing; microstructure– property relationships; densification mechanisms; extreme environments

(This special issue belongs to the Section Metals and Alloys)

Optical Properties of Crystals

edited by

Marius Stef

submission deadline 20 May 2026 | Viewed by 60 | Submission Open

Keywords: optical spectroscopy; laser crystals; crystal field effects; defect characterization; nonlinear optics

(This special issue belongs to the Section Optical and Photonic Materials)

Advanced Cement-Based Composite Materials and Composite Intelligent Design (2nd Edition)

edited by Weichen Tian, Wei Wang, Kunyang Yu and Mingzhi Wang

submission deadline 20 May 2026 | Viewed by 59 | Submission Open

Keywords: advanced cement-based composite materials; concrete in harsh environment; fibers; phase-change materials; artificial intelligence; infrastructure construction; low-carbon fabrication; composition design and performance prediction; additive manufacturing

(This special issue belongs to the Section Construction and Building Materials)

Latest Material Developments in Perovskite Solar Cells

edited by Viqar Ahmad

submission deadline 20 May 2026 | Viewed by 55 | Submission Open

Keywords: Perovskite; solar cells; stability; scalability; solar cell efficiency; low-cost solar

(This special issue belongs to the Section Energy Materials)

Biocompatible Nanomaterials for Medical Applications

edited by

Kai Li

and Nannan Zheng

submission deadline 20 May 2026 | Viewed by 55 | Submission Open

Keywords: cancer nanotherapy; drug delivery nanomaterials; immune nanomaterials; photothermal therapy; epigenetics in cancer; antitumor immunity; nanomaterial imaging; multifunctional nanocomposites; nanomaterial biocompatibility

(This special issue belongs to the Section Biomaterials)

Optical, Thermal, Elastic, and Spectral Properties of Crystals

edited by Jacek Zakrzewski and Mirosław Maliński

submission deadline 20 May 2026 | Viewed by 53 | Submission Open

Keywords: crystal properties; optoelectronics; nanotechnology; signal detection; optics; crystalline materials; microelectronics

(This special issue belongs to the Section Materials Physics)

Solid-State Electrolytes: Synthesis, Characterization and Applications

edited by Ruizhi Yang

submission deadline 20 May 2026 | Viewed by 52 | Submission Open

Keywords: solid-state lithium battery; solid-state electrolyte; ionic conductivity; ion-transport dynamics; Lithium metal compatibility; air stability; interfacial engineering

(This special issue belongs to the Section Energy Materials)

Synthesis, Characterization and Applications of Ionic Liquids (ILs)

edited by Jan Blahut

submission deadline 20 May 2026 | Viewed by 46 | Submission Open

Keywords: ionic liquids; materials science; synthesis; characterization; physical properties; chemical properties; advanced applications; sustainable technologies

(This special issue belongs to the Section Soft Matter)

Preparation and Mechanical Properties of Ceramics

edited by Edvin Hevorkian

submission deadline 20 May 2026 | Viewed by 29 | Submission Open

Keywords: advanced ceramics; ceramic composites; electroconsolidation/spark plasma sintering; nanostructured materials; tungsten carbide and hard metals; zirconia-based materials; microstructure– property relationships; mechanical and tribological properties; high-performance tool materials

(This special issue belongs to the Section Advanced and Functional Ceramics and Glasses)

Novel Functional Materials for Enhanced Pollutant Removal in Environmental Systems: Synthesis, Characterization and Mechanisms

edited by

Carlos Javier Duran-Valle

and

Ignacio López-Coca

submission deadline 20 May 2026 | Viewed by 29 | Submission Open

Keywords: adsorption; membranes; AOPs; catalyst; pollution; materials; environment

(This special issue belongs to the Section Materials Chemistry)

Structures and Light–Matter Interactions in Low-Dimensional Materials

edited by Yi Zhang and Yadong Wang

submission deadline 20 May 2026 | Viewed by 26 | Submission Open

Keywords: light– matter interaction; low-dimensional materials; heterostructures

(This special issue belongs to the Section Optical and Photonic Materials)

Advanced Polymer Matrix Nanocomposite Materials (3rd Edition)

edited by

Michał Strankowski

submission deadline 20 May 2026 | Viewed by 23 | Submission Open

Keywords: polymers; nanocomposites; graphene; carbon nanotubes; montmorillonites; thermal analysis

(This special issue belongs to the Section Advanced Composites)

Functional and Bioactive Materials for Dental Applications

edited by

Leszek Klimek

and

Zofia Kula

submission deadline 20 May 2026 | Viewed by 14 | Submission Open

Keywords: biomaterials; digital dentistry; material properties; material technologies

(This special issue belongs to the Section Biomaterials)

Advances in Sustainable Construction Materials, Third Edition

edited by Abbas Solouki and Abir Al-Tabbaa

submission deadline 30 May 2026 | 13 articles | Viewed by 11891 | Submission Open

Keywords: smart materials; low-carbon binders; sustainability; LCA; construction materials; concrete; asphalt; infrastructure; material characterization; waste fines

(This special issue belongs to the Section Construction and Building Materials)

Advanced Superconducting Materials and Technology

edited by

Tomasz Czujko

and

Daniel Gajda

submission deadline 30 May 2026 | 4 articles | Viewed by 3775 | Submission Open

Keywords: superconducting materials; MgB2; iron-based superconductors; high Tc Superconductors; synthesis and characterization; application of superconductors

(This special issue belongs to the Section Quantum Materials)

Microstructure Evolution and Mechanical Properties of Metals and Building Materials

edited by

Bartlomiej Jez

and Katarzyna Błoch

submission deadline 30 May 2026 | 2 articles | Viewed by 1530 | Submission Open

Keywords: metals alloys; building materials; geopolymers; microstructure evolution

(This special issue belongs to the Section Mechanics of Materials)

Advanced Polymers and Composites for Multifunctional Applications, 2nd Edition

edited by

Kinga Pielichowska

,

Katarzyna Nowicka

and

Piotr Szatkowski

submission deadline 30 May 2026 | Viewed by 56 | Submission Open

Keywords: polymer composites; nanocomposites; advanced polymers; high-performance polymers; multifunctional systems; properties and structure of functional polymer composites; degradation and stability of polymer composites; functional polymer composites for the environment

(This special issue belongs to the Section Polymeric Materials)

Advances in Wear Behaviour and Tribological Properties of Materials

edited by

Qianxi He

, Abul Fazal M. Arif and

Ricardo D. Torres

submission deadline 31 May 2026 | 2 articles | Viewed by 2331 | Submission Open

Keywords: tribological properties; wear resistance; wear mechanisms; surface topography; frictional behavior; material surface engineering

(This special issue belongs to the Section Mechanics of Materials)

Selected Papers from the 4th International Online Conference on Materials (IOCM 2025)

edited by

Ingo Dierking

submission deadline 31 May 2026 | 2 articles | Viewed by 2115 | Submission Open

Keywords: optical; electric and magnetic materials; nanomaterials; quantum materials; soft matter; biomaterials; composites; interfaces; materials theory; simulations and AI; materials for energy harvesting; conversion and storage; green materials; materials manufacturing

Advances in Luminescent Materials: Characterization and Device Applications

edited by Kai Li and Baojiu Chen

submission deadline 31 May 2026 | 1 articles | Viewed by 784 | Submission Open

Keywords: phosphors; LEDs; bioimaging; thermometer; anti-counterfeiting; luminescent materials

(This special issue belongs to the Section Optical and Photonic Materials)

Advances in Solid Oxide Electrochemical Cells: Materials, Innovations and Applications

edited by Kai Pei

submission deadline 31 May 2026 | Viewed by 155 | Submission Open

Keywords: solid oxide fuel cells (SOFCs); solid oxide electrolysis cells (SOECs); reversible protonic ceramic electrochemical cells (R-PCECs); energy storage; hydrogen production; materials innovation; ceramic materials; electrode design

(This special issue belongs to the Section Energy Materials)

Solar Cells and Photovoltaic Materials: Technologies and Applications

edited by Zhen Wang

submission deadline 31 May 2026 | Viewed by 69 | Submission Open

Keywords: perovskite photovoltaics; crystallization control; device stability; scalable fabrication

(This special issue belongs to the Section Energy Materials)

Deformation/Fracture Behavior, Microstructure Evolution and Mechanical Properties of Steel

edited by

Ming-Wei Wu

submission deadline 31 May 2026 | Viewed by 66 | Submission Open

Keywords: steel; microstructure; mechanical behavior; deformation; fracture; material analysis; simulation

(This special issue belongs to the Section Metals and Alloys)

Next-Generation Nanomaterials for High-Performance Supercapacitors

edited by Péter Baumli and Máté Czagány

submission deadline 10 Jun 2026 | 2 articles | Viewed by 1720 | Submission Open

Keywords: nanomaterials; supercapacitor; energy storage; smart energy; battery; hydrogen storage; hybrid system; catalytic system; nanostructures

(This special issue belongs to the Section Energy Materials)

Reinforced Polymer Composites with Natural and Nano Fillers

edited by Ge Cao and He Zhang

submission deadline 10 Jun 2026 | 2 articles | Viewed by 1126 | Submission Open

Keywords: conductive polymers; natural fiber composites; nanofiller reinforcement; biodegradable composites; interface engineering; hybrid filler systems; surface modification of fillers; green processing technologies; sustainable polymer materials; multifunctional nanocomposites

(This special issue belongs to the Section Advanced Composites)

The Development of Sustainable Concrete with Solid Waste and By-Products (Second Edition)

edited by

Ina Pundienė

and Jolanta Pranckevičienė

submission deadline 10 Jun 2026 | 3 articles | Viewed by 1034 | Submission Open

Keywords: cement based materials; alkali-activated materials; organic and inorganic waste; ceramic materials; admixture; nanomaterials; durability; material characterization

(This special issue belongs to the Section Construction and Building Materials)

Enhanced Properties of Advanced Materials via Surface Modification and Composite Coatings

edited by

Shuhao Liu

and Jun Kyun Oh

submission deadline 10 Jun 2026 | 1 articles | Viewed by 614 | Submission Open

Keywords: surface modification; composite coatings; multifunctional properties; polymers; nanomaterials

(This special issue belongs to the Section Thin Films and Interfaces)

Chemistry and Technology of Materials Based on Silicon Compounds (2nd Edition)

edited by

Karol Szubert

submission deadline 10 Jun 2026 | Viewed by 384 | Submission Open

Keywords: silicon-based materials; silanes; polysiloxanes; silicates; polymeric materials; ceramic materials; protective coatings; coatings— surface chemistry and properties; materials characterization; applications

(This special issue belongs to the Section Materials Chemistry)

Sustainable Corrosion Protection Coatings

edited by

Mian Hammad Nazir

submission deadline 10 Jun 2026 | Viewed by 371 | Submission Open

Keywords: sustainable coatings; corrosion protection; bio-based coatings; self-healing coatings; green materials; environmental impact; protective polymers; material durability; eco-friendly coatings; corrosion resistance

(This special issue belongs to the Section Corrosion)

Advances in Structural Health Monitoring (SHM) and Nondestructive Testing (NDT) of Materials

edited by

Donghoon Kang

and

Kyungwho Choi

submission deadline 10 Jun 2026 | Viewed by 222 | Submission Open

Keywords: structural health monitoring (SHM); non-destructive testing (NDT) and non-destructive evaluation (NDE); inspection and analyzing skills; modeling and simulation; theory and mechanism; smart structures and integrated system; industrial and commercial applications; ultrasonics; electromagnetics; radiography; optical and thermal methods; nano-; bio-; info-tech-; and advanced sensors for NDT; non-destructive inspection for Industry 4.0; smart sensing materials for structural health monitoring; functional materials for advanced sensor systems; self-powered sensor systems

(This special issue belongs to the Section Advanced Materials Characterization)

Copper- and Iron-Based Superconductors: Preparation, Properties, and Functionalization Applications

edited by He Huang and Chao Yao

submission deadline 10 Jun 2026 | Viewed by 122 | Submission Open

Keywords: high-temperature superconductors; cuprate superconductors; iron-based superconductors; pulsed laser deposition; metal– organic deposition; powder-in-tube

(This special issue belongs to the Section Materials Physics)

Advances in Plasma and Laser Engineering (Third Edition)

edited by

Mariusz Jasinski

submission deadline 10 Jun 2026 | Viewed by 101 | Submission Open

Keywords: plasma deposition; laser deposition; plasma treatment of materials; laser treatment of materials; plasma activation of surfaces; laser activation of surfaces; pulsed plasmas; pulsed lasers; new materials; plasma sources; laser sources; plasma engineering; laser engineering

(This special issue belongs to the Section Manufacturing Processes and Systems)

Characterization, Properties, and Applications of New Metallic Alloys (2nd Edition)

edited by

Weimin Wang

and

Ki Buem Kim

submission deadline 10 Jun 2026 | Viewed by 93 | Submission Open

Keywords: metallic glasses; medium/high-entropy alloys; nano metallic alloys; nano metallic alloys; mechanical properties; corrosion; function

(This special issue belongs to the Section Metals and Alloys)

Fabrication of Advanced Materials

edited by Yang Li

submission deadline 20 Jun 2026 | 4 articles | Viewed by 8604 | Submission Open

Keywords: advanced manufacturing technologies; additive manufacturing; welding; other fabrication techniques; material characterization; microstructure; mechanical properties

(This special issue belongs to the Section Manufacturing Processes and Systems)

Advanced Functional Coatings for Surface Engineering: Deposition, Properties and Applications

edited by

Karol Kyzioł

submission deadline 20 Jun 2026 | 7 articles | Viewed by 7264 | Submission Open

Keywords: surface modification; functional coatings; hybrid coatings; layered materials; surface properties; bio-functional coatings; drug delivery systems; anti-wear application; anti-corrosion protection; biocompatibility

(This special issue belongs to the Section Thin Films and Interfaces)

High-Performance Materials for Energy Conversion

edited by Guanshui Ma and Hang Zhao

submission deadline 20 Jun 2026 | 5 articles | Viewed by 6707 | Submission Open

Keywords: solar cells; fuel cells; batteries; catalysis; thermoelectric devices; supercapacitors; lithium– sulfur batteries; energy storage material

(This special issue belongs to the Section Energy Materials)

Sustainable Cement Materials: Preparation, Experimental Analysis and Engineering Applications

edited by Huanyu Li,

Chao Zhang

and Junyi Zhang

submission deadline 20 Jun 2026 | 4 articles | Viewed by 6339 | Submission Open

Keywords: sustainable cement; workability; rheology; hydration; mechanical properties; durability; microstructure; life cycle assessment

(This special issue belongs to the Section Construction and Building Materials)

Journal Menu

Journal Browser

Special Issues

Further Information

Guidelines

MDPI Initiatives

Follow MDPI