Announcements

MDPI has just become the first open access (OA) publisher to reach the milestone of one million articles published. That is one million articles freely available to all, to circulate and build upon! We are proud to share this special moment with the global scientific community.

This landmark has been reached thanks to the immeasurable support of more than 600,000 expert reviewers, 66,000 editorial board members and 6700 hard-working colleagues across MDPI’s global offices.

Within more than 25 years of publishing, our journals received 2.1 million manuscripts and generated 4.6 million peer review reports to get to one million papers published.

Reaching the milestone of one million articles published reinforces our mission to remove any existing barriers and to make scientific research accessible to all. Since its inception, MDPI’s goal has been to create reliable processes to make science open. This is a path towards facilitating the dissemination of novel insights in scientific communities.

Regular feedback from authors and reviewers shows that our service is greatly appreciated and needed. At the same time, the feedback helps us identify areas for further improvement.

As it stands, a significant share of published research findings remain closed access. More than half of the content published with the most well-known legacy publishers stays behind a paywall, and that is not including articles published in hybrid OA journals, or made available months or years after publication.

A new policy announced by the US administration in August 2022 requires that, as of January 2026, all US federally funded research be made freely and immediately available after publication. While the new policy does not mandate articles be published under an open access license, it is aligned with the open access movement in removing all barriers to research. Similarly, some of the most advanced research institutions in the world intend to have all funded research articles published in open access by 2025.

MDPI is proud to be the leading agent of the transition to open access.

"Thanks a Million" to all the contributors!

We are pleased to announce that the website of the MDPI Sustainability Foundation has been revamped! For the past couple of months, our UX UI team and front-end developers have been working hard to launch the website in time for the opening of the Sustainability Awards nominations.

The website is not the only thing that has had a remodeling. Indeed, the format of the Emerging Sustainability Leader Award (ESLA) has been updated. ESLA is now a competition open to individual researchers or start-ups founded by researchers under the age of 35. Nominee applications will go through 2 rounds of selection until the final 3 are decided. The finalists will then be invited to give pitch presentations during the Award Ceremony to win either first place (10,000 USD) or runner-up (2 x 5000 USD).

The World Sustainability Award, on the other hand, remains the same: a total prize money of 100,000 USD is up for grabs by senior individual researchers or groups of researchers from the international research community.

Nominations for both the World Sustainability Award and the Emerging Sustainability Leader award are now open! Check out our new website for more information on how to nominate.

Stanford University has recently published an update of the list of the top 2% most widely cited scientists—the World’s Top 2% Scientists. 

The time node of the statistical data of this list is from 1960 to 2022, and it is divided into two lists: "Lifetime Scientific Influence Ranking" and "2022 Annual Scientific Influence Ranking". The "Lifetime Scientific Influence Ranking" counts the comprehensive influence performance of scientists during their careers, and the "2022 Annual Influence Ranking" focuses on highlighting the academic influence of scientists in the previous year. This ranking, considered the most prestigious worldwide, is based on the bibliometric information contained in the Scopus database and includes more than 200,000 researchers from the more than 10 million scientists considered to be active worldwide, with 22 scientific fields and 176 subfields taken into account. 

We are pleased to share that 37 Editorial Board Members from MDPI’s Lubricants (ISSN: 2075-4442) were featured in Stanford University’s list of the World’s Top 2% Scientists in 2022. 

The latest Stanford rankings reflect the significant influence and research excellence of the scientists, who are committed to furthering their knowledge for the benefit of the world. 

We would like to congratulate our Editorial Board Members on their excellent achievement and thank them for their immense contribution to the scientific progression and development of Lubricants.

MDPI will be attending the 14th National Surface Engineering Conference, held in Wuhan, China, from 11 to 13 November 2022. This conference aims to achieve an in-depth exchange of the latest research results in surface engineering and related disciplines and to discuss the frontier trends and future development trends of surface engineering research and engineering application. During this conference, MDPI will welcome researchers from different backgrounds to visit and share their latest ideas with us. 

The following MDPI journals will be represented:

• Lubricants;
• Applied Sciences;
• Surfaces;
• Polymers;
• Materials;
• QuBS;
• Coatings;
• Clean Technologies. 

If you plan on attending this conference, feel free to stop by our booth. Our delegates look forward to meeting you in person to answer any questions you may have. 

For more information about the conference, please see the following link: http://bmgc2022.aconf.cn/index.html.

Peer Review Week began 19 September 2022 under the theme of “Research Integrity: Creating and Supporting Trust in Research”. Through various blog articles, podcast, and webinar, we discussed this crucial subject throughout the week, celebrating the essential role peer review plays in maintaining research quality.

To begin, we held a Webinar on the topic. Professor Peter W. Choate and Dr. Emmanuel Obeng-Gyasi joined Dr. Ioana Craciun, one of MDPI’s scientific officers, for an in-depth discussion.

We invite you to view the event recording:

During the week, the MDPI Blog in a series articles highlighted how good Peer Review safeguards research integrity. The following topics were covered:

• Peer Review Week 2022
• Research Integrity
• What We’ve Learned About Peer Review Reports
• 4 Steps to the Perfect Peer Review Report
• How to Write the Perfect Peer Review Report: An Interview
• Inviting Great Peer Reviewers

In a new edition of Insight Faster, an MDPI podcast, we were delighted to talk to the co-chairs of the Peer Review Week committee, Jayashree Rajagopalan (Senior Manager of Global Community Engagement for CACTUS) and Danielle Padula (Head of Marketing and Community Development at Scholastica) to get their take on this year’s event and its related topics.

You can find the Podcast here.

We hope you enjoy the contents!

We are pleased to announce the launch of a new initiative—the Special Issue Mentor Program. 

This program aims to provide an opportunity for early career scientists to enhance their editing, networking, and organizational skills and to work closely with our journal to gain more editorial experience. Early career scientists who have novel ideas for new Lubricants Special Issues will act as Guest Editors under the mentorship of an experienced scientist; this mentor could be a member of the Editorial Board of Lubricants (ISSN: 2075-4442) or, for example, from other well-established research institutes or laboratories.

The mentee’s responsibilities include:

• Providing a CV, including a list of publications;
• Proposing a Special Issue title and a short introduction;
• Writing a brief promotion plan for the Special Issue;
• Writing an editorial for the online Special Issue;
• Reviewing and making decisions for submissions under the mentorship of our Editorial Board Members. 

The mentor’s responsibilities include:

• Conducting a final check before the Special Issue is published online;
• Co-editing the Special Issue with the young scholars and performing quality control of the publications in the Special Issue;
• Providing suggestions to the young scholars if they have doubts or concerns regarding submissions;
• Organizing video calls with the young scholars and the office regularly to discuss problems and improvement suggestions for the Special Issue. 

Certificates and awards:

When the Special Issue is closed, the Editorial Office will provide official certificates for all the mentors and mentees. 

If you are interested in this opportunity, please send your Special Issue proposal to the Lubricants Editorial Office (lubricants@mdpi.com), and we will discuss the process (mentor collaboration, Special Issue topic feasibility analysis, etc.) in further detail.

In addition to the new Special Issue Mentor Program, Lubricants continues to welcome all Special Issue proposals based on hot research topics as usual. 

Lubricants Editorial Office

The purpose of our Best Paper Awards is to promote and recognize the most impactful contributions published within MDPI journals.

The academic editors of each journal carefully selected reviews and research papers through a rigorous judging process based on criteria such as the scientific merit, overall impact, and the quality of presentation of the papers published in the journal.

We are honored to present the winners in the “Engineering” category, who were selected amongst extensive competition, and congratulate the authors for their outstanding scientific publications.

Actuators:

• “Position Control of Pneumatic Actuators Using Three-Mode Discrete-Valued Model Predictive Control”
  by Haitao Qi, Gary M. Bone and Yile Zhang
  Actuators 2019, 8(3), 56; doi: 10.3390/act8030056
• “Review of Electrothermal Actuators and Applications”
  by Alissa Potekhina and Changhai Wang
  Actuators 2019, 8(4), 69; doi: 10.3390/act8040069

Batteries:

• “Pre-Lithiation Strategies for Rechargeable Energy Storage Technologies: Concepts, Promises and Challenges”
  by Florian Holtstiege, Peer Bärmann, Roman Nölle, Martin Winter and Tobias Placke
  Batteries 2018, 4(1), 4; doi: 10.3390/batteries4010004
• “A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective”
  by Omar Velázquez-Martínez, Johanna Valio, Annukka Santasalo-Aarnio, Markus Reuter and Rodrigo Serna-Guerrero
  Batteries 2019, 5(4), 68; doi: 10.3390/batteries5040068
• “Critical Review of the Use of Reference Electrodes in Li-Ion Batteries: A Diagnostic Perspective”
  by Rinaldo Raccichini, Marco Amores and Gareth Hinds
  Batteries 2019, 5(1), 12; doi: 10.3390/batteries5010012
• “Life Cycle Analysis of Lithium-Ion Batteries for Automotive Applications”
  by Qiang Dai, Jarod C. Kelly, Linda Gaines and Michael Wang
  Batteries 2019, 5(2), 48; doi 10.3390/batteries5020048
• “Design Strategies for High Power vs. High Energy Lithium Ion Cells”
  by Michael J. Lain, James Brandon and Emma Kendrick
  Batteries 2019, 5(4), 64; doi: 10.3390/batteries5040064

Chemosensors:

• “Influence of Humidity on NO₂-Sensing and Selectivity of Spray-CVD Grown ZnO Thin Film above 400 °C”
  by Roussin Lontio Fomekong and Bilge Saruhan
  Chemosensors 2019, 7(3), 42; doi: 10.3390/chemosensors7030042
• “Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad”
  by Ashley D. Johnson, Rose M. Curtis and Karl J. Wallace
  Chemosensors 2019, 7(2), 22; doi: 10.3390/chemosensors7020022

Journal of Marine Science and Engineering:

• “Marine Application of Fiber Reinforced Composites: A Review”
  by Felice Rubino, Antonio Nisticò, Fausto Tucci and Pierpaolo Carlone
  Mar. Sci. Eng. 2020, 8(1), 26; doi: 10.3390/jmse8010026
• “Numerical Simulation of Large Wave Heights from Super Typhoon Nepartak (2016) in the Eastern Waters of Taiwan”
  by Shih-Chun Hsiao, Hongey Chen, Han-Lun Wu, Wei-Bo Chen, Chih-Hsin Chang, Wen-Dar Guo, Yung-Ming Chen and Lee-Yaw Lin
  Mar. Sci. Eng. 2020, 8(3), 217; doi: 10.3390/jmse8030217
• “Development of Deterministic Artificial Intelligence for Unmanned Underwater Vehicles (UUV)”
  by Timothy Sands
  Mar. Sci. Eng. 2020, 8(8), 578; doi: 10.3390/jmse8080578

Lubricants:

• “Solid Lubrication with MoS₂: A Review”
  by Mohammad R. Vazirisereshk, Ashlie Martini, David A. Strubbe and Mehmet Z. Baykara
  Lubricants 2019, 7(7), 57; doi:10.3390/lubricants7070057
• “Investigations of the Friction Losses of Different Engine Concepts. Part 1: A Combined Approach for Applying Subassembly-Resolved Friction Loss Analysis on a Modern Passenger-Car Diesel Engine”
  by Christoph Knauder, Hannes Allmaier, David E. Sander and Theodor Sams
  Lubricants 2019, 7(5), 39; doi: 10.3390/lubricants7050039
• “A Discussion on Present Theories of Rubber Friction, with Particular Reference to Different Possible Choices of Arbitrary Roughness Cutoff Parameters”
  by Andrea Genovese, Flavio Farroni, Antonio Papangelo and Michele Ciavarella
  Lubricants 2019, 7(10), 85; doi: 10.3390/lubricants7100085

Micromachines:

• “4D Printing of Multi-Hydrogels Using Direct Ink Writing in a Supporting Viscous Liquid”
  by Takuya Uchida and Hiroaki Onoe
  Micromachines 2019, 10(7), 433; doi: 10.3390/mi10070433
• “Enhanced Photocatalytic Performance and Mechanism of Au@CaTiO₃ Composites with Au Nanoparticles Assembled on CaTiO₃ Nanocuboids”
  by Yuxiang Yan, Hua Yang, Zao Yi, Ruishan Li and Xiangxian Wang
  Micromachines 2019, 10(4), 254; doi: 10.3390/mi10040254
• “Three-Dimensionally Structured Flexible Fog Harvesting Surfaces Inspired by Namib Desert Beetles”
  by Jun Kyu Park and Seok Kim
  Micromachines 2019, 10(3), 201; doi: 10.3390/mi10030201

Processes:

• “Accelerating Biologics Manufacturing by Modeling or: Is Approval under the QbD and PAT Approaches Demanded by Authorities Acceptable without a Digital-Twin?”
  by Steffen Zobel-Roos, Axel Schmidt, Fabian Mestmäcker, Mourad Mouellef, Maximilian Huter, Lukas Uhlenbrock, Martin Kornecki, Lara Lohmann, Reinhard Ditz and Jochen Strube
  Processes 2019, 7(2), 94; doi: 10.3390/pr7020094
• “Multiscale Agent-Based and Hybrid Modeling of the Tumor Immune Microenvironment”
  by Kerri-Ann Norton, Chang Gong, Samira Jamalian and Aleksander S. Popel
  Processes 2019, 7(1), 37; doi: 10.3390/pr7010037
• “Dynamic Flowsheet Model Development and Sensitivity Analysis of a Continuous Pharmaceutical Tablet Manufacturing Process Using the Wet Granulation Route”
  by Nirupaplava Metta, Michael Ghijs, Elisabeth Schäfer, Ashish Kumar, Philippe Cappuyns, Ivo Van Assche, Ravendra Singh, Rohit Ramachandran, Thomas De Beer, Marianthi Ierapetritou and Ingmar Nopens
  Processes 2019, 7(4), 234; doi: 10.3390/pr7040234

Sensors:

• “A Decentralized Privacy-Preserving Healthcare Blockchain for IoT”
  by Ashutosh Dhar Dwivedi, Gautam Srivastava, Shalini Dhar and Rajani Singh
  Sensors 2019, 19(2), 326; doi: 10.3390/s19020326
• “The Progress of Glucose Monitoring—A Review of Invasive to Minimally and Non-Invasive Techniques, Devices and Sensors”
  by Wilbert Villena Gonzales, Ahmed Toaha Mobashsher and Amin Abbosh
  Sensors 2019, 19(4), 800; doi: 10.3390/s19040800
• “Contact-Based Methods for Measuring Respiratory Rate”
  by Carlo Massaroni, Andrea Nicolò, Daniela Lo Presti, Massimo Sacchetti, Sergio Silvestri and Emiliano Schena
  Sensors 2019, 19(4), 908; doi: 10.3390/s19040908

World Electric Vehicle Journal:

• “Dynamic Wireless Power Transfer Charging Infrastructure for Future EVs: From Experimental Track to Real Circulated Roads Demonstrations”
  by Stéphane Laporte, Gérard Coquery, Virginie Deniau, Alexandre De Bernardinis and Nicolas Hautière
  World Electr. Veh. J. 2019, 10(4), 84; doi: 10.3390/wevj10040084

MDPI’s Young Investigator Awards recognize promising junior researchers, acknowledge their contributions, and enhance communication among scientists. We are proud to present the winners for the year 2021 in the “Engineering” category. The winners were selected by the journals’ editors.

We warmly congratulate the awarded Young Investigators for their outstanding contributions. MDPI will continue to provide support and recognition to the academic community.

Biosensors:

• Amay J. Bandodkar, North Carolina State University, USA.

ChemEngineering:

• Andrew S. Paluch, Miami University, USA.

Chemosensors:

• Mindy Levine, Ariel University, Israel.

Electronics:

• Amir H. Gandomi, University of Technology Sydney, Australia.

Journal of Marine Science and Engineering:

• Tiago Fazeres-Ferradosa, University of Porto, Portugal.

Machines:

• Chen Lv, Nanyang Technological University (NTU), Singapore;
• Ignacio Gonzalez-Prieto, University of Malaga (UMA), Spain;
• Ning Sun, Nankai University, China.

Processes:

• Anton Rassõlkin, Tallinn University of Technology, Estonia.

Sensors:

• Qammer H. Abbasi, Queen Mary University of London, UK;
• Chi Hwan Lee, Purdue University, USA.

We are proud to recognize the winners of MDPI’s 2021 Travel Awards in the “Engineering” category for their outstanding presentations and to present them with the prize.

MDPI journals regularly offer travel awards to encourage talented junior scientists to present their latest research at academic conferences in specific fields, which helps to increase their influence.

The winners mentioned below were carefully selected by the journal editors based on an outline of their research and the work to be presented at an academic conference.

We would like to warmly congratulate the winners of this year’s Travel Awards and wish them the greatest success with their future research endeavors. MDPI will continue to enhance communication among scientists.

Actuators:

• Matthew Wei Ming Tan, Nanyang Technological University, Singapore.

Applied Sciences:

• Márcia de Sousa Oliveira, University of León, Spain;
• Caroline Sarah Taylor, University of Sheffield, UK;
• Raquel Viveiros, NOVA University of Lisbon, Portugal;
• Alfonso González Briones, University of Salamanca, Spain;
• Alen Horvat, University Carlos III Madrid, Spain;
• Marie Švecová, University of Chemistry and Technology, Czech Republic;
• Venanzio Giannella, University of Salerno, Italy;
• Michaël Lobet, University of Namur, Belgium;
• Lam Thi Ngoc Tran, National Research Council, Italy;
• Hanfei Mei, University of South Carolina, USA.

Applied System Innovation:

• Mert Nakip, Polish Academy of Sciences, Poland.

Biosensors:

• Mengdi Bao, Rochester Institute of Technology, USA;

Yichi Su, Stanford University, USA.

Buildings:

• Karthik Panchabikesan, Concordia University, Canada;
• Xiaolei Yuan, Tongji University, China.

Chemosensors:

• Verónica Montes García, Université de Strasbourg & CNRS, France.

Electronics:

• Peng Hang, Nanyang Technological University, Singapore;
• Alfonso González Briones, University of Salamanca, Spain.

Fluids:

• Alberto Zingaro, Politecnico di Milano, Italy;
• Sarah E. Morris, Auburn University, USA.

Infrastructures:

• Angelo Aloisio, University of L’Aquila, Italy;
• André Filipe Castanheira Alves Furtado, University of Porto, Portugal.

Journal of Low Power Electronics and Applications:

• Tommaso Zanotti, University of Modena and Reggio Emilia, Italy.

Journal of Manufacturing and Materials Processing:

• Nagalingam Arun Prasanth, Rolls-Royce@NTU Corporate Lab, Singapore.

Machines:

• Muhammad Jamil, Nanjing University of Aeronautics and Astronautics (NUAA), China;
• Mariagrazia Tristano, Sheffield Hallam University, UK.

Processes:

• Michele Schlich, University of Cagliari, Italy;
• Álvaro Santana Mayor, University of La Laguna, Spain.

Sensors:

• Eleonora Macchia, Åbo Akademi University, Finland;
• Alfonso Gonzalez Briones, University of Salamanca, Spain;
• Saúl Vallejos Calzada, University of Burgos, Spain;
• Ana Novo, University of Vigo, Spain;
• Yalin Liu, Macau University of Science and Technology, China;
• Marilena Giglio, Politecnico of Bari, Italy;
• Yuzhi Shi, Nanyang Technological University (NTU), Singapore.

In order to acknowledge our reviewers, who so generously dedicate their time to reviewing papers and demonstrate diligence, professionalism, and timeliness when reviewing manuscripts, MDPI journals regularly offer outstanding reviewer awards to scholars who participate in the peer-review process.

We are proud to recognize the winners for the year 2021 in the “Engineering” category for their outstanding contributions among extensive competition by presenting them with an Outstanding Reviewer Award.

We would like to take this opportunity to congratulate all of the winners on their achievement. MDPI will continue to provide support and recognition to the academic community.

Actuators:

• Ryszard Dindorf, Kielce University of Technology, Poland.

Applied Sciences:

• Khaled Giasin, University of Portsmouth, UK;
• Jakub Krzysztof Grabski, University of Technology, Poland;
• Marcos Tostado-Véliz, University of Jaén, Spain;
• Luigi Pugliese, University of Calabria, Italy;
• Francesco Bennardo, University of Catanzaro, Italy;
• Heriberto Perez-Acebo, University of the Basque Country UPV/EHU, Spain.

Biosensors:

• Amir Hatamie, University of Gothenburg, Sweden.

Buildings:

• Francesco Fiorito, Polytechnic University of Bari, Italy;
• Paul G. O’Brien, York University, Canada.

Chemosensors:

• Verónica Montes García, University of Strasbourg, France.

Machines:

• Piotr Gierlak, Rzeszow University of Technology, Poland;
• Sebastian A. Nugroho, University of Michigan, USA;
• Viorel Paleu, Gheorghe Asachi Technical University of Iasi, Romania.

Processes:

• Marcin Dębowski, University of Warmia and Mazury in Olsztyn, Poland;
• Bartłomiej Zieniuk, Warsaw University of Life Sciences, Poland;
• Zbigniew Nadolny, Poznan University of Technology, Poland;
• Attila Egedy, University of Pannonia, Hungary;
• Seok-Ho Rhi, Chungbuk National University, Korea.

Sensors:

• Hojong Choi, Kumoh National Institute of Technology, Korea;
• Li Fu, Hangzhou Dianzi University, China;
• Leonardo De Mello Honorio, Federal University of Juiz De Fora Juiz De Fora, Brazil;
• Mario Versaci, Mediterranea University, Italy;
• Robertas Damasevicius, Kaunas University of Technology, Lithuania.