Fibers | Highly Cited Papers Published in 2024–2025 (I)

Fibers (ISSN 2079-6439) is an open access journal, granting its readers free and unlimited access to all of its texts and articles. We welcome you to read our selection of highly cited papers from Fibers, which are listed below:

1. “A Review of Natural Fibers: Classification, Composition, Extraction, Treatments, and Applications”
by Telmo Eleutério, Maria João Trota, Maria Gabriela Meirelles and Helena Cristina Vasconcelos
Fibers 2025, 13(9), 119; https://doi.org/10.3390/fib13090119
Full text available online: https://www.mdpi.com/2079-6439/13/9/119

2. “An Experimental Investigation on the Effect of Incorporating Natural Fibers on the Mechanical and Durability Properties of Concrete by Using Treated Hybrid Fiber-Reinforced Concrete Application”
by Anteneh Geremew, Amelie Outtier, Pieter De Winne,Tamene Adugna Demissie and Hans De Backer
Fibers 2025, 13(3), 26; https://doi.org/10.3390/fib13030026
Full text available online: https://www.mdpi.com/2079-6439/13/3/26

3. “Converging Electrospinning and 3D-Printing Technologies: From Innovative Design for Tissue Engineering to Global Patent Trends and Technology Transfer”
by Karen J. Juarez-Navarro, Vincenzo Guarino and Marco A. Alvarez-Perez
Fibers 2025, 13(6), 83; https://doi.org/10.3390/fib13060083
Full text available online: https://www.mdpi.com/2079-6439/13/6/83

4. “Experimental and Statistical Investigations for Tensile Properties of Hemp Fibers”
by Peyman Sadeghi, Quang Cao, Ragab Abouzeid, Mohammad Shayan, Meensung Koo and Qinglin Wu
Fibers 2024, 12(11), 94; https://doi.org/10.3390/fib12110094
Full text available online: https://www.mdpi.com/2079-6439/12/11/94

5. “Enhancing Interfacial Adhesion in Kevlar and Ultra-High Molecular Weight Polyethylene Fiber-Reinforced Laminates: A Comparative Study of Surface Roughening, Plasma Treatment, and Chemical Functionalization Using Graphene Nanoparticles”
by Feyi Adekunle, Jan Genzer and Abdel-Fattah M. Seyam
Fibers 2025, 13(2), 19; https://doi.org/10.3390/fib13020019
Full text available online: https://www.mdpi.com/2079-6439/13/2/19

6. “Greening Fused Deposition Modeling: A Critical Review of Plant Fiber-Reinforced PLA-Based 3D-Printed Biocomposites”
by Muneeb Tahir and Abdel-Fattah Seyam
Fibers 2025, 13(5), 64; https://doi.org/10.3390/fib13050064
Full text available online: https://www.mdpi.com/2079-6439/13/5/64

7. “Evaluation of Hydrothermally Treated Wood Fibre Performance in Cement Mortars”
by Petrini Kampragkou, Vasiliki Kamperidou and Maria Stefanidou
Fibers 2024, 12(3), 21; https://doi.org/10.3390/fib12030021
Full text available online: https://www.mdpi.com/2079-6439/12/3/21

8. “Influence of Particle Size on the Mechanical Properties of Single-Layer Particleboards”
by Nick Engehausen, Jan Thore Benthien and Jan Lüdtke
Fibers 2024, 12(4), 32; https://doi.org/10.3390/fib12040032
Full text available online: https://www.mdpi.com/2079-6439/12/4/32

9. “Production of Nanofibers by Electrospinning as Carriers of Agrochemical”
by Julia Colín-Orozco, Elena Colín-Orozco and Ricardo Valdivia-Barrientos
Fibers 2024, 12(8), 64; https://doi.org/10.3390/fib12080064
Full text available online: https://www.mdpi.com/2079-6439/12/8/64

10. “Recovery of N-Methylmorpholine N-Oxide (NMMO) in Lyocell Fibre Manufacturing Process”
by Maria Sawiak, Bernardo A. Souto, Lelia Lawson, Joy Lo and Patricia I. Dolez
Fibers 2025, 13(1), 3; https://doi.org/10.3390/fib13010003
Full text available online: https://www.mdpi.com/2079-6439/13/1/3