Materials | Top 10 Cited Papers in 2022 in the Section “Polymeric Materials”

We are pleased to invite you to read the top 10 cited papers from 2022 in Materials (ISSN: 1996-1944) in the Section “Polymeric Materials”. The paper list is as follows:

1. “Environmental Impact of Surgical Masks Consumption in Italy Due to COVID-19 Pandemic”
by Antonella Cornelio, Alessandra Zanoletti, Stefania Federici, Luca Ciacci, Laura Eleonora Depero and Elza Bontempi
Materials 2022, 15(6), 2046; https://doi.org/10.3390/ma15062046
Available online: https://www.mdpi.com/1996-1944/15/6/2046

2. “Joule-Heating Effect of Thin Films with Carbon-Based Nanomaterials”
by Usha Kiran Sanivada, Dina Esteves, Luisa M. Arruda, Carla A. Silva, Inês P. Moreira and Raul Fangueiro
Materials 2022, 15(12), 4323; https://doi.org/10.3390/ma15124323
Available online: https://www.mdpi.com/1996-1944/15/12/4323

3. “A Novel Manufacturing Concept of LCP Fiber-Reinforced GPET-Based Sandwich Structures with an FDM 3D-Printed Core”
by Jacek Andrzejewski, Marcin Gronikowski and Joanna Aniśko
Materials 2022, 15(15), 5405; https://doi.org/10.3390/ma15155405
Available online: http://www.mdpi.com/1996-1944/15/15/5405

4. “The Use of Nanoscale Montmorillonite (MMT) as Reinforcement for Polylactide Acid (PLA) Prepared by Fused Deposition Modeling (FDM)—Comparative Study with Biocarbon and Talc Fillers”
by Jacek Andrzejewski, Mateusz Markowski and Mateusz Barczewski
Materials 2022, 15(15), 5205; https://doi.org/10.3390/ma15155205
Available online: https://www.mdpi.com/1996-1944/15/15/5205

5. “Preparation and Properties of Thermoplastic Polyurethane Composites Filled with Powdered Buckwheat Husks”
by Marcin Włoch and Paulina Landowska
Materials 2022, 15(1), 356; https://doi.org/10.3390/ma15010356
Available online: https://www.mdpi.com/1996-1944/15/1/356

6. “Effect of Chitosan Deacetylation on Its Affinity to Type III Collagen: A Molecular Dynamics Study”
by Piotr Bełdowski, Maciej Przybyłek, Alina Sionkowska, Piotr Cysewski, Magdalena Gadomska, Katarzyna Musiał and Adam Gadomski
Materials 2022, 15(2), 463; https://doi.org/10.3390/ma15020463
Available online: https://www.mdpi.com/1996-1944/15/2/463

7. “Fracture Load Predictions in Additively Manufactured ABS U-Notched Specimens Using Average Strain Energy Density Criteria”
by Marcos Sánchez, Sergio Cicero, Sergio Arrieta and Victor Martínez
Materials 2022, 15(7), 2372; https://doi.org/10.3390/ma15072372
Available online: https://www.mdpi.com/1996-1944/15/7/2372

8. “Additively Manufactured Composite Lug with Continuous Carbon Fibre Steering Based on Finite Element Analysis”
by Chethan Savandaiah, Stefan Sieberer and Georg Steinbichler
Materials 2022, 15(5), 1820; https://doi.org/10.3390/ma15051820
Available online: https://www.mdpi.com/1996-1944/15/5/1820

9. “Complicated Structure Change during Capillary Extrusion of Binary Blends of Polycarbonate and Poly(methyl methacrylate)”
by Masayuki Yamaguchi, Kodai Nakamura, Takeyoshi Kimura, Nantina Moonprasith, Takumitsu Kida, Kyoko Tsubouchi, Takaaki Narita and Tatsuhiro Hiraoka
Materials 2022, 15(8), 2783; https://doi.org/10.3390/ma15082783
Available online: https://www.mdpi.com/1996-1944/15/8/2783

10. “Characterization of Organosolv Lignins and Their Application in the Preparation of Aerogels”
by Piia Jõul, Tran T. Ho, Urve Kallavus, Alar Konist, Kristiina Leiman, Olivia-Stella Salm, Maria Kulp, Mihkel Koel and Tiit Lukk
Materials 2022, 15(8), 2861; https://doi.org/10.3390/ma15082861
Available online: https://www.mdpi.com/1996-1944/15/8/2861