Skip to Content
You are currently on the new version of our website. Access the old version .
  • Proceeding Paper
  • Open Access

16 March 2026

12 Pages

Towards Predictive Models of Mechanical Properties in 3D-Printed Polymers: An Exploratory Study †

,
and
1
proMetheus, Higher School of Technology and Management, Polytechnic Institute of Viana do Castelo (IPVC), 4900-347 Viana do Castelo, Portugal
2
Centre for Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, Universidade de Aveiro, 3810-193 Aveiro, Portugal
*
Authors to whom correspondence should be addressed.
†
Presented at the 6th International Electronic Conference on Applied Sciences, 9–11 December 2025; Available online: https://sciforum.net/event/ASEC2025.

Abstract

Additive manufacturing, particularly 3D printing, is increasingly shaping the production of polymer-based components, enabling complex geometries and tailored functional performance. Yet, predicting their mechanical behavior remains challenging due to material anisotropy and sensitivity to processing conditions. This work presents an exploratory study designed to provide the experimental basis for the development and calibration of predictive models of mechanical properties in 3D-printed components. Standard ISO 527-2 Type 1A specimens were fabricated using thermoplastic PLA (polylactic acid) with systematic variations in layer orientation, infill overlap, and printing velocity. Mechanical characterization was carried out through uniaxial tensile testing to determine tensile strength and stiffness of the material specimens, while scanning electron microscopy (SEM) provided complementary insights into interlayer bonding, filament alignment, porosity, and fracture morphology. Results showed that material type and processing strategies strongly influenced mechanical response, with SEM highlighting microstructural features that govern interlayer adhesion and failure mechanisms. These findings contribute to a deeper understanding of process–structure–property relationships in additive manufacturing and establish the groundwork for predictive model development. Ongoing efforts will integrate these experimental insights into numerical simulations employing homogenized material models, thereby enhancing design optimization and reliability of 3D-printed structural components.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.