Coatings, Volume 15, Issue 6

Lanthanum strontium manganate (La1−xSrxMnO3) is considered a highly promising material for the development of intelligent thermal control coatings due to its exceptional properties. Recent studies on this material have primarily utilized solid-...

Magnesium alloys are widely used in all kinds of fields because of their excellent mechanical properties, but their application has been prevented by poor corrosion resistance. In this paper, Mg(OH)2-Ca(OH)2/Al(OH)3/Al2O3 composite coatings with long...

This work presents an exhaustive parametric study of the multi-scale residual stress analysis on arbitrary substrate geometry based on a one-way-coupled thermo-mechanical model in an Atmospheric Plasma Spray process. It was carried out by modifying k...

Technologies for functional coatings are evolving rapidly, with electrospark alloying (ESA) emerging as a promising method for surface modification due to its efficiency and localized impact. This review analyzes the fundamental principles of ESA and...

Cellulose-based paper products derived from agro-industrial waste have attracted considerable interest due to their potential in sustainable material development. In this study, bacterial cellulose (BC) residue from the food and beverage industry was...

In this study, a boron-doped diamond (BDD) sensor was used to study the electroanalytical behavior of emerging contaminants (ECs), such as caffeine, paracetamol and methyl orange. BDD shows strong resolving power for the superimposed voltammetric res...

To extend the spectral utilisation of In2S3, an In2S3/C3N4 nanocomposite was prepared. The effects of different sulphur sources, electrodes, and bias voltages on the optoelectronic performance were examined. Photoelectric properties in response to li...

The research on nano titanium dioxide (nano-TiO2)-modified asphalt has received increasing attention. However, further studies are required in order to ascertain the influence of the phenomenon under discussion on the rheological characteristics and...

With growing emphasis on sustainable construction, fiber-reinforced polymer (FRP) bars are increasingly being used as alternatives to steel rebars due to their high strength-to-weight ratio, corrosion resistance, and environmental benefits. This stud...

The surface modification of dental implants with nanostructured films enables the development of the next generation of biomaterials that promote osseointegration. In this study, a uniform layer of titanium oxide nanotubes (TNTs) was successfully for...