Prior to the publication of the original work [], reference 27 was retracted. Concerns were raised about this matter, so the following reference was removed from the reference list:
“27. Mohanavel, V.; Ravichandran, M.; Ali, K.S.A.; Sathish, T.; Karthick, A.; Arungalai, V.S.; Velmurugan, P.; Salmen, S.H.; Alfarraj, S.; Sivakumar, S.; et al. Synthesis and Workability Behavior of Cu-X wt.% TiC (x = 0, 4, 8, and 12) Powder Metallurgy Composites. Bioinorg. Chem. Appl. 2022, 2022, 8101680.”
Additionally, the sentence originally citing reference 27 was deleted:
“V. Mohanavel et al. [27] prepared CMCs reinforced with different TiC contents by powder metallurgy method and the results showed that the density and hardness of the composites increased gradually with the increase in TiC content”.
Following the removal of reference 27, subsequent references and their corresponding citations in the main text have been adjusted according to numerical sequence.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Li, D.; Sun, C.; Zhai, Z.; Wang, Z.; Chen, C.; Lei, Q. Study on the Electrical and Mechanical Properties of TiC Particle-Reinforced Copper Matrix Composites Regulated by Different Rare Earth Elements. Nanomaterials 2025, 15, 96. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).