Next Article in Journal
Electrodeposition and Corrosion Behavior of Cu-Sn Alloys in 3.5 wt.% NaCl and 0.1 M HNO3 Solutions
Previous Article in Journal
Material Characterisation, Modelling, and Validation of a UHSS Warm-Forming Process for a Heavy-Duty Vehicle Chassis Component
 
 
Correction to Metals 2024, 14(8), 871.
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Altshuler, T.L. The Brittle Fracture of Iron and Steel and the Sharp Upper Yield Point Are Caused by Cementite Grain Boundary Walls. Metals 2024, 14, 871

by
Thomas L. Altshuler
Department of Mechanical Engineering, Northeastern University, Boston, MA 02115, USA
Metals 2025, 15(4), 425; https://doi.org/10.3390/met15040425
Submission received: 27 November 2024 / Accepted: 28 November 2024 / Published: 9 April 2025
There were three errors in the original publication [1].
Equation (12) has been changed to the following:
L = 1.273E(γs + γp)/ σ c2
In Sections 6.5 and 6.6, “Figure 13” has been changed to “Figure 12”.
In Section 6.6, the formula “c = y 560 MPa” has been changed to “ σ c = σ y = 560 MPa”.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Altshuler, T.L. The Brittle Fracture of Iron and Steel and the Sharp Upper Yield Point Are Caused by Cementite Grain Boundary Walls. Metals 2024, 14, 871. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Altshuler, T.L. Correction: Altshuler, T.L. The Brittle Fracture of Iron and Steel and the Sharp Upper Yield Point Are Caused by Cementite Grain Boundary Walls. Metals 2024, 14, 871. Metals 2025, 15, 425. https://doi.org/10.3390/met15040425

AMA Style

Altshuler TL. Correction: Altshuler, T.L. The Brittle Fracture of Iron and Steel and the Sharp Upper Yield Point Are Caused by Cementite Grain Boundary Walls. Metals 2024, 14, 871. Metals. 2025; 15(4):425. https://doi.org/10.3390/met15040425

Chicago/Turabian Style

Altshuler, Thomas L. 2025. "Correction: Altshuler, T.L. The Brittle Fracture of Iron and Steel and the Sharp Upper Yield Point Are Caused by Cementite Grain Boundary Walls. Metals 2024, 14, 871" Metals 15, no. 4: 425. https://doi.org/10.3390/met15040425

APA Style

Altshuler, T. L. (2025). Correction: Altshuler, T.L. The Brittle Fracture of Iron and Steel and the Sharp Upper Yield Point Are Caused by Cementite Grain Boundary Walls. Metals 2024, 14, 871. Metals, 15(4), 425. https://doi.org/10.3390/met15040425

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop