In the original publication [1], there were mistakes in the legends for Figures 1 and 3 as published. The corrected legends for Figures 1 and 3 appear below.
Figure 1. The principle diagram of backwater-assisted laser drilling. Adapted with permission from Ref. [11]. Copyright 2025, Springer Nature.
Figure 3. Schematic diagram of laser processing in (a) open-air conditions and (b) backside water-assisted conditions; (c) ring cutting path. Adapted with permission from Ref. [11]. Copyright 2025, Springer Nature.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Correction Statement
This article has been republished with a minor correction to the copyright information. This change does not affect the scientific content of the article.
Reference
- Wang, L.; Xia, R.; Zhou, J.; Rong, Y.; Wu, C.; Xu, L.; Han, X.; Xia, K. Experimental Study on Backwater-Assisted Picosecond Laser Trepanning of 304 Stainless Steel. Metals 2025, 15, 1138. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).