Skip to Content
LubricantsLubricants
  • Article
  • Open Access

19 May 2026

21 Pages

Integrated Multi-Physics Design of a GGG40 Agricultural Trailer Wheel Hub: Concurrent Topology Optimisation and CFD-Based Lubrication Enhancement

Seydişehir Vocational School, Necmettin Erbakan University, Seydişehir, 42360 Konya, Türkiye
This article belongs to the Special Issue Machine Design and Tribology

Abstract

Wheel hubs in heavy-duty agricultural trailers operate under demanding conditions comprising rough terrain, impact loads, and highly variable load spectra. Current design practice relies predominantly on experience-based sizing rather than systematic multi-physics analysis. This study presents an integrated design methodology combining finite element analysis (FEA), density-based topology optimisation, and computational fluid dynamics (CFD) to concurrently improve the structural and tribological performance of a GGG40 spheroidal graphite cast iron agricultural trailer wheel hub. A reference commercial hub geometry was modelled and analysed under multiple load conditions with a safety factor of 5. Critical stress regions were identified, and the free design volume was optimised while preserving all functional surfaces. The optimised design achieved 35% mass reduction (14.9 to 9.6 kg), 30% lower maximum von Mises stress (235 to 165 MPa), and up to 40% stress reduction in the bearing seat region. Oil-circulation channels integrated into the bearing housing raised mean lubrication flow velocity by 28% and eliminated stagnation zones, yielding a more homogeneous oil-film distribution and directly benefiting bearing tribological performance. The proposed framework provides a manufacturable engineering methodology that concurrently addresses structural integrity and lubrication performance in agricultural wheel hub design.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.