Abstract
Water chemistry and the space between mineral surfaces can change how a polymer reaches and attaches to an interface. We used molecular dynamics to study a partially hydrolyzed polyacrylamide (HPAM) chain with 48 units and 25% hydrolysis at quartz and kaolinite surfaces. The aqueous media were water without added salt, nominal 0.6 M NaCl, and simplified synthetic seawater. Single-surface simulations measured retention for 10 ns after a temporary approach restraint was removed. Simulations between opposing surfaces followed migration and attachment for 200 ns. NaCl gave the greatest retention at the prepared single interfaces. Between opposing surfaces, the smallest nominal configuration favored kaolinite association in all three media. During 150–200 ns, mean kaolinite-associated monomer fractions were 31%, 28%, and 46%, respectively, while quartz fractions remained below 1%. At larger separations, paths and attachment differed more between trajectories. Ion profiles showed distinct molecular layers at each mineral and changes in local ion distributions with HPAM. These results show that retention at a prepared interface does not directly predict attachment when both minerals are accessible. They describe migration and association within the simulated time, rather than an equilibrium adsorption ranking.