Correction: Park et al. Synergistic Effect of MWCNT and Carbon Fiber Hybrid Fillers on Electrical and Mechanical Properties of Alkali-Activated Slag Composites. Crystals 2020, 10, 1139

Hyeong Min Park; Chanho Park; Jinho Bang; Minwook Lee; Beomjoo Yang

doi:10.3390/cryst12050583

,

and

¹

School of Civil Engineering, Chungbuk National University, 1 Chungdae-ro, Seowon-gu, Cheongju 28644, Korea

²

Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), 92 Chudong-ro, Bongdong-eup, Wanju-gun 55324, Korea

^*

Authors to whom correspondence should be addressed.

Crystals2022, 12(5), 583;https://doi.org/10.3390/cryst12050583

Version Notes

Order Reprints

In the original article, there was a mistake in Figure 4, as published. Figure 4a,b has been represented as the same graph [1]. The corrected Figure 4 appears below. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.

Figure 4. Compressive strength results of CF filler-incorporated AAS composites with (a) 0 wt.%, (b) 0.5 wt.%, and (c) 1.0 wt.% of CF.

Reference

Park, H.M.; Park, C.; Bang, J.; Lee, M.; Yang, B. Synergistic effect of MWCNT and carbon fiber hybrid fillers on electrical and mechanical properties of alkali-activated slag composites. Crystals 2020, 10, 1139. [Google Scholar] [CrossRef]

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).

Correction: Park et al. Synergistic Effect of MWCNT and Carbon Fiber Hybrid Fillers on Electrical and Mechanical Properties of Alkali-Activated Slag Composites. Crystals 2020, 10, 1139

Reference

Article Metrics

Citations

Article Access Statistics