Next Article in Journal
Light Manipulation in Inhomogeneous Liquid Flow and Its Application in Biochemical Sensing
Next Article in Special Issue
Effect of Process Parameters and Material Properties on Laser Micromachining of Microchannels
Previous Article in Journal
SF6 Optimized O2 Plasma Etching of Parylene C
Previous Article in Special Issue
Investigation of Micro-Bending of Sheet Metal Laminates by Laser-Driven Soft Punch in Warm Conditions
Open AccessCorrection

Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386

Galatea lab, STI/IMT, Ecole Fédérale Polytechnique de Lausanne (EPFL), Rue de la Maladière, 71b, CH-2002 Neuchâtel, Switzerland
*
Author to whom correspondence should be addressed.
Micromachines 2018, 9(4), 164; https://doi.org/10.3390/mi9040164
Received: 12 March 2018 / Revised: 21 March 2018 / Accepted: 22 March 2018 / Published: 2 April 2018
(This article belongs to the Collection Laser Micromachining and Microfabrication)
Note: In lieu of an abstract, this is an excerpt from the first page.

The authors would like to make the following changes to the published paper [1]: Equation (5) should be written as follows:[...] View Full-Text
MDPI and ACS Style

Athanasiou, C.-E.; Bellouard, Y. Correction: Athanasiou, C.-E. et al. A Monolithic Micro-Tensile Tester for Investigating Silicon Dioxide Polymorph Micromechanics, Fabricated and Operated Using a Femtosecond Laser. Micromachines, 2015, 6, 1365–1386. Micromachines 2018, 9, 164.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map

1
Back to TopTop