There were typographical mistakes in the original publication [1]. In Equation (20), the term “−Td” should be “−Tds”. Similarly, in Equation (23), the term “−0.1471” should be “−0.1471 s”. In Table 8, the coefficient D0, i.e., 0.0587, should be “0.587”.
A correction has been made to Section 3, Controller Tuning: Rule-Based Methods, Paragraph Number 2, Equation Number (20). The corrected equation is given as
A correction has been made to Section 4.1, Overall Model of Islanded Microgrid, Paragraph Number 2, Equation Number (23). The corrected equation is given as
A correction has been made to Table 8, Line Number 1. The corrected line of Table 8 is given as
| N0 | 3.003 | D0 | 0.587 |
The authors state that the scientific conclusions are unaffected. The Academic Editor approved this correction. The original publication has also been updated.
Reference
- Bashishtha, T.K.; Singh, V.P.; Yadav, U.K.; Varshney, T. Reaction Curve-Assisted Rule-Based PID Control Design for Islanded Microgrid. Energies 2024, 17, 1110. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).