Search Results (1,203)

The present paper reports the preparation of a nanocomposite thin film consisting of calcium itaconate and graphene oxide (GO). The composite is a black powder consisting of individual shiny prismatic crystals at varying degrees of maturity. The crystal size distribution is quite narrow: from 3.6 to 6.2 μm in length and from 0.7 to 1.1 μm in width. Thin-film-based acetone sensor made of a nanocomposite was fabricated by spin coating of calcium itaconate–GO nanoparticles on glass plates. The thin-film acetone sensor was characterized using FTIR, XRD, SEM, TEM, and the low-temperature nitrogen sorption–desorption method. The sensor response time is 7.66 ± 0.07 s (s_r = 0.92%), and the relaxation time when blowing the surface with clean air or inert gas (nitrogen, argon) is 9.26 ± 0.12 s (s_r = 1.28%). The sensing mechanism of the sensor for detecting acetone at room temperature was also is proposed based on phenomenological understanding due to the absence of direct electronic/charge-transport evidence. Full article

Driven by environmental concerns, the packaging industry is shifting toward high-performance and bio-based coating alternatives. In this research, poly(methylmethacrylate) (PMMA) and modified cellulose nanocrystal (m-CNC) were employed as reinforcing agents to develop sustainable poly (lactic acid)-based coatings for packaging applications. Various formulations, influenced by polymer matrix blends and m-CNC loadings (1–5%), were prepared using solvent and applied as protective coating on cardboard paper substrates. The grammage of polymeric coatings (CG) on paper was also investigated using various wet film thicknesses (i.e., 150–250 μm). Accordingly, key parameters including water contact angle, thermal behavior, mechanical performances and barrier properties were systematically evaluated to assess the effectiveness of the developed nanocomposite coatings. As a result, nonylphenol ethoxylate surfactant-modified cellulose nanocrystals exhibited good dispersion and stable suspension in chloroform for one hour, improving compatibility and interaction of polymer–CNC fillers. The water vapor permeability (WVP) of PLA-coated papers was significantly reduced by blending PMMA and increasing the content of m-CNC nanofillers. Furthermore, CNC incorporation enhanced the oil resistance of PLA/PMMA-coated cardboard. Pronounced improvements in barrier properties were observed for paper substrates coated with dry coat weight or CG of ~20 g/m² (corresponding to 250 μm wet film thickness). Coatings based on blended polymer—particularly those reinforced with nanofillers—markedly enhanced the hydrophobicity of the cardboard papers. SEM-microscopy confirmed the structural integrity and morphology of the nanocomposite coatings. Regarding mechanical properties, the upgraded nanocomposite copolymer (PLA-75%/PMMA-25%/m-CNC3%) exhibited the highest bending test and tensile strength, achieved on coated papers and free-standing polymeric films, respectively. Based on DSC analysis, the thermal characteristics of the PLA matrix were influenced to some extent by the presence of PMMA and m-CNC. Overall, PLA/PMMA blends with an optimal amount of CNC nanofillers offer promising sustainable coatings for the packaging applications. Full article

Magnetic filaments for fused deposition modeling, 3D printing, were produced by depositing polyamide 11 (PA11), by liquid–liquid phase separation and precipitation, onto exchange-coupled nanocomposite magnetic powders, SmCo₅ + 20 wt% Fe produced by mechanical milling and subsequent annealing. The produced filaments have good mechanical properties, a tensile strength of 32 MPa and a maximum elongation of slightly over 40%. The filaments also present good magnetic properties: a high coercive field of 1 T at 300 K and nearly double the saturation magnetization and remanence, compared to filaments made by depositing PA11 on commercial SmCo₅ and recycled SmCo₅ powders and four times the energy product. This work shows that magnetic filaments made by encapsulating exchange-coupled magnetic nanocomposite powders in PA11 may be a viable option for the production of 3D-printed isotropic bonded magnets, as the high energy product and remanence especially can lead to a reduction in both magnetic powder quantity and rare earth elements required for high performance magnetic filaments. This in turn may reduce costs and improve sustainability. Full article

Fresh fruits are inherently prone to postharvest deterioration due to loss of moisture, respiration, mechanical damage, and microbial decay, making quality preservation a persistent challenge across fresh fruit supply chains. While conventional plastic packaging offers barrier protection and cost-efficiency, its environmental footprint, particularly poor biodegradability and increasing incidence of plastic waste necessitates a transition toward more sustainable alternatives. Among these, the use of edible coatings, primarily based on natural biopolymers, have emerged as a versatile strategy capable of modulating transpiration, gas exchange, microbial activity, and sensory quality while addressing environmental concerns. Unlike biodegradable plastic films, edible coatings directly interface with the fruit surface and offer multifunctional roles extending beyond passive protection. This review synthesizes recent advances in edible coatings for fresh fruits, with emphasis on material classes, functional performance, optimization strategies, and analytical evaluation methods. Key findings indicate that polysaccharide-based coatings provide adequate gas permeability but limited moisture resistance, while nanocomposite and multi-component systems enhance water-vapor barrier performance without compromising respiration compatibility. Incorporation of bioactive agents such as essential oils, nanoparticles, and plant extracts further extends shelf life through antimicrobial and antioxidant mechanisms, though formulation trade-offs and sensory constraints persist. The review also highlights critical limitations, including variability in barrier and mechanical properties, challenges in industrial-scale application, insufficient long-term validation under commercial cold-chain conditions, and regulatory uncertainty for active formulations. Future research priorities are identified, including mechanistic transport–physiology integration, standardized performance metrics, scalable application technologies, and life-cycle-informed material design. Addressing these gaps is essential for transitioning edible coatings from experimental sustainability concepts to robust, function-driven solutions for fresh-fruit preservation. Full article

Photoacoustic imaging (PAI) integrates the high-contrast merits of optical imaging with the high-spatial-resolution advantages of acoustic imaging, enabling the acquisition of three-dimensional images with deep tissue penetration (up to several centimeters) for in vivo disease detection and diagnosis. Among various photoacoustic nanoagents, gold nanomaterials (GNMs) have been widely explored for the PAI-based imaging analysis and photothermal therapy of diseases, owing to their strong near-infrared (NIR) absorption, which can generate distinct photoacoustic signals in deep tissues. This review focuses on recent advances and achievements in the development of functionalized gold nanoprobes, including Janus gold nanoprobes, gold nanocomposite probes (such as functionally coated GNMs and GNMs-loaded nanocarriers), and gold nanoaggregate probes (e.g., pre-assembly of GNMs and in situ aggregation of GNMs). The multifunctionalization of GNMs can enhance their PAI performance by shifting absorption to the NIR-I and NIR-II regions, while simultaneously imparting additional functionalities such as targeted delivery to disease sites and specific responsiveness to disease biomarkers. These features can render functionalized GNMs-based nanoprobes highly suitable for PAI-based analysis and the precise detection of various pathological conditions, including bacterial infections, tumors, kidney injury, and disorders affecting the ocular, gastrointestinal, cardiovascular, visceral, and lymphatic systems. Finally, this review provides a concise summary of biosafety evaluation and outlines the current challenges and future perspectives in optimizing the GNMs-based PAI methods, highlighting their potential to enhance the rapid and precise diagnosis of diseases in the future. Full article

This article provides a comprehensive review of the literature on the use of graphene-based nanomaterials (graphene oxide, reduced graphene oxide, and graphene nanoplatelets) and nanosilica (SiO₂) in architectural paint and coatings. The aim was to quantitatively assess their effect on dirt pickup resistance, hydrophobicity, and mechanical properties. In a systematic search across ScienceDirect, Scopus, and Web of Science (2010–2025), 20 studies that met the set inclusion criteria were identified. We extracted and generalized data with random-effects models (REML) based on standardized mean differences, conducting subgroup and meta-regression analyses to assess filler type, loading, and binder system impact. The results reveal that graphene-based fillers and SiO₂ improve coating performance at the same time, and hybrid graphene-SiO₂ systems may provide a synergistic improvement depending on the binder matrix. Our results present the first quantitative evidence of graphene-SiO₂ interaction in the coating formulations, identify remaining research gaps, and indicate methods for designing next-generation facade paints with better dirt repellence, durability, and sustainability. Full article

The contamination of water bodies by polycyclic aromatic hydrocarbons (PAHs) poses a significant concern for the ecological systems, along with public health. Magnetic adsorption stands out as a green and practical solution for treating polluted water. To make the process more efficient and economical, it is important to create materials that not only absorb contaminants effectively but also allow for easy recovery and reuse. This study proposes a simple yet effective method for coating Fe₃O₄ nanoparticles with hydroxypropyl-β-cyclodextrin polymer (HP-β-CDCP). The physicochemical properties of the synthesized sorbent were characterized using a transmission electron microscope (TEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and Vibrating Sample Magnetometer (VSM) analysis. The adsorption performance of HP-β-CDCP/Fe₃O₄ nanoparticles was well-described by the pseudo-second-order kinetic model, thermodynamic analysis, and the Freundlich isotherm model, indicating multiple interaction mechanisms with PAHs, such as π–π interactions, hydrogen bonding, and van der Waals forces. Using HP-β-CDCP/Fe₃O₄ nanoparticles as the adsorbent, the purification rates for the fifteen representative PAHs were achieved within the range of 33.9–93.1%, compared to 15.3–64.8% of the unmodified Fe₃O₄ nanoparticles. The adsorption of all studied PAHs onto HP-β-CDCP/Fe₃O₄ nanocomposites was governed by pH, time, and temperature. Equilibrium in the uptake mechanism was obtained within 15 min, with the largest adsorption capacities for PAHs in competitive adsorption mode being 6.46–19.0 mg·g⁻¹ at 20 °C, pH 7.0. This study points to the practical value of incorporating cyclodextrins into tailored polymer frameworks for improving the removal of PAHs from polluted water. Full article

The primary goal of this study was to improve the rheological properties of water-based drilling mud using a combination of TiO₂-coated ZnO nanoparticles and activated carbon (AC) from banana peels. The TiO₂/ZnO nanocomposites were prepared using polyvinyl alcohol (PVA) as a binder under magnetic stirring and ultrasonic sonication to ensure uniform coating, followed by washing and controlled thermal treatment. NaOH-assisted chemical activation of banana peel produced activated carbon with better porosity and surface functionality than raw banana peel. The base water-based mud used in this study had different concentrations of both additives mixed in, and rheological parameters such as mud density, plastic viscosity (PV), yield point (YP), and gel strength were measured according to standard API methods. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used for structural and morphological characterization, which proved the successful coating and uniform dispersion of TiO₂ on ZnO nanoparticles. The use of mixed additives resulted in a significant improvement in mud properties, such as viscosity, gel strength, and yield point, proving to be more effective in suspension capacity and overall rheological stability. The use of this hybrid bio-nanocomposite mud system is a very economical and eco-friendly way of enhancing the drilling fluid performance, thus proving to be a supporting factor in conducting drilling operations that are both safe and efficient. Additionally, this study provides a sustainable hybrid TiO₂-ZnO and activated carbon additive that results in synergistic improvement of drilling-mud rheology and stability. Full article

Objective: The objective of our study was to synthesize and characterize silica–copper nanomaterials and to evaluate their biological properties (antibacterial, redox, cytotoxic, and ecotoxic) for potential applications. Methods and Results: Si/Cu-based materials were prepared by a sol–gel method. They were characterized by XRD, UV-Vis, and SEM-EDS. The antibacterial activity of the materials was evaluated against Gram-positive bacteria (Staphylococcus aureus, Bacillus cereus), Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium), and yeasts (Candida albicans, Saccharomyces cerevisiae). The nanomaterial that was calcined at 500 °C exhibited greater antibacterial efficacy compared to the gel form. S. typhimurium demonstrated the highest susceptibility, whereas S. aureus and P. aeruginosa were the most resistant of the tested bacteria. Both yeasts exhibited comparable sensitivity (MBC = 1.0 mg/mL). The redox activity of both nanomaterials was tested at pH 7.4 (physiological) and 8.5 (optimal) by the activated chemiluminescent method. The nanocomposites significantly inhibited the free-radical and ROS generation. This presents them as redox regulators in living systems. The cytotoxic effects in normal BEAS-2B and tumor A549 human cell lines were assessed microscopically and by the cell viability neutral red uptake assay, CC₅₀ being evaluated. The observed effects suggest moderate, similar cytotoxicity in both cell lines. The ecotoxicity study using Daphnia magna showed an LC₅₀ of ~7–8 mg/L about Si/Cu/500. The LC₅₀ for Si/Cu (gel) was lower than 0.25 mg/L, indicating an increase in toxicity with increased exposure time. Conclusions: Possible applications of the newly synthesized nanomaterials include antimicrobial coatings, drug delivery systems, antioxidant additives in various formulations, and water purification. Full article

There is a growing demand for biocompatible, non-toxic nanomaterials with specific functional properties, including catalytic activity. In this study, magnetic iron oxide nanoparticles were synthesized via chemical co-precipitation in the presence of polyethylene glycol (PEG). PEG was used as a coating agent to reduce particle agglomeration. Comprehensive characterization of the synthesized nanocomposites was performed using scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDX) and vibrating sample magnetometry (VSM). SEM studies confirmed the nanosized structure of the particles with an average diameter of 20–60 nm. The saturation magnetization values were 57.37 emu·g⁻¹ for nFe₃O₄-PEG6000, 11.95 emu·g⁻¹ for nFe₃O₄-PEG4000 and 3.97 emu·g⁻¹ for nCo_0.5Ni_0.5Fe₂O₄-PEG4000. In addition to their high magnetic properties, ferrofluids exhibited peroxidase-like activity, which makes them highly suitable for bioanalytical and biomedical use. The Michaelis–Menten constant (K_M) for hydrogen peroxide ranged from 1.15 to 4.98 mM. Transmission electron microscopy (TEM) proved the penetration of the nano-ferrofluids into the yeast cells of Ogataea polymorpha. The studied nano-ferrofluids were found to be non-toxic at concentrations up to 0.2 mg·mL⁻¹ for both prokaryotic and eukaryotic cells, showing no inhibitory effect on the growth of the bacterium Escherichia coli, the yeast Ogataea polymorpha, or animal and human cell lines. These results indicate that the advantages of synthetic nano-ferrofluids—including peroxidase-like activity, strong magnetic properties, cost-effective synthesis, stability, and low toxicity—make the synthesized nano-ferrofluids highly promising for future biomedical and bioanalytical applications. Full article

Silver nanoparticles (AgNPs) are widely used as antibacterial agents either as colloidal solutions or deposited on surfaces. However, the high concentration of AgNPs can lead to cytotoxicity, posing a hazard to healthy cells and tissues. Achieving a balance between antibacterial efficacy and cytocompatibility is crucial for biomedical applications. Polymeric coatings, especially those made from polydimethylsiloxane (PDMS) like Sylgard 184, are popular in biomedical applications due to their user-friendliness. We have developed a cost-effective method to reduce silver ions using the Si-H silane functions of PDMS in situ. Tetrahydrofuran (THF) acts as a solvent, inducing a swelling effect in PDMS, allowing silver ions from silver tetrafluoroborate (AgBF₄) dissolved in THF to diffuse into the polymer and undergo reduction. This process results in PDMS functionalized with well-distributed 10 nm silver AgNPs. The resulting metal–polymer nanocomposites (MPNs) exhibit yellow shades and, based on qualitative Live/Dead staining observations, show no apparent cytotoxicity on human gingival fibroblasts. In addition, SEM analyses indicate a qualitative reduction in E. coli adhesion, suggesting an antibacterial anti-adhesive potential against this bacterial strain. Further studies should investigate the release profile of AgNPs in these composites, which could guide the development of new biocompatible coatings for phototherapy devices and enhance their long-term clinical performance. Full article

Fiber-reinforced polymer composites, particularly carbon fiber and glass fiber reinforced composites, are widely used in cutting-edge industries due to their excellent properties, such as light weight and high strength. This review systematically compares and summarizes recent research advances in flame retardancy for carbon fiber-reinforced polymers and glass fiber-reinforced polymers. Focusing on various polymer matrices, including epoxy, polyamide, and polyetheretherketone, the mechanisms and synergistic effects of different flame-retardant modification strategies—such as additive flame retardants, nanocomposites, coating techniques, intrinsically flame-retardant polymers, and advanced manufacturing processes—are analyzed with emphasis on improving flame retardancy and suppressing the “wick effect.” The review critically examines the challenges in balancing flame retardancy, mechanical performance, and environmental friendliness in current approaches, highlighting the key role of interface engineering in mitigating the “wick effect.” Based on this analysis, four future research directions are proposed: implementing green design principles throughout the material life cycle; promoting the use of natural fibers, bio-based resins, and bio-derived flame retardants; developing intelligent responsive flame-retardant systems based on materials such as metal–organic frameworks; advancing interface engineering through biomimetic design and advanced characterization to fundamentally suppress the fiber “wick effect”; and incorporating materials genome and high-throughput preparation technologies to accelerate the development of high-performance flame-retardant composites. This review aims to provide systematic theoretical insights and clear technical pathways for developing the next generation of high-performance, safe, and sustainable fiber-reinforced composites. Full article

Growing concern over the environmental impact of fossil-based plastics used in food packaging has prompted new legislative action (most notably EU Regulation 2025/40, commonly referred to as the “Packaging and Packaging Waste Regulation”) demanding a transition toward more sustainable and highly functional alternatives [...] Full article

The application of bioinspired nanocomposites in orthopedic implants marks a significant innovation in biomedical engineering, aimed at overcoming long-standing limitations of conventional implant materials. Traditional implants frequently suffer from poor osseointegration, mechanical mismatch with bone, and vulnerability to infection. Bioinspired nanocomposites, modeled after the hierarchical structures found in natural tissues such as bone and nacre, offer the potential to enhance mechanical performance, biological compatibility, and implant functionality. This study reviews and synthesizes current advancements in the design, fabrication, and functionalization of bioinspired nanocomposite materials for orthopedic use. Emphasis is placed on the integration of nanocrystalline hydroxyapatite (nHA), carbon nanotubes (CNTs), titanium dioxide (TiO₂) nanotubes, and other nanostructured coatings that mimic the extracellular matrix. Methods include comparative evaluations of mechanical properties, surface modifications for biocompatibility, and analyses of antibacterial efficacy through nano-topographical features. Bioinspired nanocomposites have been shown to improve osteoblast adhesion, proliferation, and differentiation, thereby enhancing osseointegration. Nanostructured coatings such as TiO₂ nanotubes increase surface hydrophilicity and corrosion resistance, supporting long-term implant stability. Mechanically, these composites offer high stiffness, superior wear resistance, and improved strength-to-weight ratios. Biomimetic combinations of hydroxyapatite, zirconia, and biopolymers have demonstrated effective load transfer and reduced stress shielding. Additionally, antibacterial functionality has been achieved via nanostructured surfaces that deter bacterial adhesion while remaining cytocompatible with host tissues. The integration of bioinspired nanocomposites into orthopedic implants provides a multifunctional platform for enhancing clinical outcomes. These materials not only replicate the mechanical and biological properties of native bone but also introduce new capabilities such as infection resistance and stimuli-responsive behavior. Despite these advancements, challenges including manufacturing scalability, long-term durability, and regulatory compliance remain. Continued interdisciplinary research is essential for translating these innovations from laboratory to clinical practice. Full article

To increase the use of the near-infrared (NIR) light from In₂O₃, a nanocomposite of In₂O₃/reduced graphene oxide was synthesised. To improve adhesion to the substrates, a small amount of PVA (polyvinyl alcohol) was added to the nanocomposite. Results showed that adding an appropriate amount of PVA to the nanocomposite remarkably enhanced the ability to extract photogenerated carriers due to interface optimisation based on the grain boundary filling with PVA and charge tunnelling effects. The nanocomposites exhibited photoconductive switching responses from the visible light region to the near-infrared range. Meanwhile, the organic/inorganic hybrid coating on silk fibres exhibited mutual conversion of positive and negative photoconductivity, as well as electrical switching responses to applied strain. Furthermore, it was found that a photoelectric signal could still be determined with zero bias after the In₂O₃/reduced graphene oxide nanocomposite had been stored for over four years. This reflects that the nanocomposites have an internal electric field that promotes the transfer of photogenerated carriers and prevents the recombination of photogenerated electrons and holes. Similar results were also obtained by adding an appropriate amount of other non-conjugated polymers, such as dendrimers. Physical mechanisms are discussed. This study provides reference values for the development of multifunctional organic/inorganic hybrids integrating non-conjugated polymer components to enhance specific properties. Full article