Search Results (908)

Metal ions, including Mg(II), Ca(II), Sr(II), Co(II), Ni(II), Cu(II), Nd(III), Eu(III), and Tb(III), were investigated in binary systems alongside ampicillin at molar ratios of 1:1 and 1:2. These investigations were carried out in aqueous solutions, and the formation of complexes was verified through meticulous computational analysis. Detailed stability constants for the formed complexes and equilibrium constants for the involved reactions were meticulously determined. Furthermore, a comprehensive examination of the impact of ligand concentration on the configuration of the central metal atom’s coordination sphere was conducted. This investigation was complemented by spectroscopic measurements, which effectively confirmed the observed changes in the coordination sphere of the metal ions. Full article

This study presents the synthesis and physicochemical characterization of coordination compounds formed between chrysin, a natural flavonoid, and transition metal ions: Mn(II), Co(II), and Zn(II). The complexes were obtained under mildly basic conditions and analyzed using elemental analysis, thermogravimetric analysis (TGA), silver-assisted laser desorption/ionization mass spectrometry (SALDI-MS), FT-IR spectroscopy, and ¹H NMR. The spectroscopic data confirm that chrysin coordinates as a bidentate ligand through the 5-hydroxyl and 4-carbonyl groups, with structural differences depending on the metal ion involved. The mass spectrometry results revealed distinct stoichiometries: 1:2 metal-to-ligand ratios for Mn(II) and Co(II), and 1:1 for Zn(II), with additional hydroxide coordination. Biological assays demonstrated that Co(II) and Mn(II) complexes exhibit enhanced antibacterial and anti-biofilm activity compared to free chrysin, particularly against drug-resistant Staphylococcus epidermidis, whereas the Zn(II) complex showed negligible biological activity. Full article

Metal–Organic Frameworks (MOFs) have emerged as advanced porous crystalline materials due to their highly ordered structures, ultra-high surface areas, fine-tunable pore sizes, and massive chemical diversity. These features, arising from the coordination between an almost unlimited number of metal ions/clusters and organic linkers, have resulted in significant interest in MOFs for applications in gas storage, catalysis, sensing, energy, and biomedicine. Beyond their stand-alone properties and applications, recent research has increasingly explored the integration of MOFs with other substrates, particularly electrodes, polymeric thin films, and glass surfaces, to create synergistic effects that enhance material performance and broaden application potential. Coating MOFs onto these substrates can yield significant benefits, including, but not limited to, improved sensitivity and selectivity in electrochemical sensors, enhanced mechanical and separation properties in membranes, and multifunctional coatings for optical and environmental applications. This review provides a comprehensive and up-to-date summary of recent advances (primarily from the past 3–5 years) in MOF coating techniques, including layer-by-layer assembly, in situ growth, and electrochemical deposition. This is followed by a discussion of the representative applications arising from MOF-substrate coating and an outline of key challenges and future directions in this rapidly evolving field. This article aims to serve as a focused reference point for researchers interested in both fundamental strategies and applied developments in MOF surface coatings. Full article

The structures of hexaammine solvated indium(III) and thallium(III) ions in liquid ammonia solution are determined by EXAFS. Both complexes have regular octahedral coordination geometry with mean In-N and Tl-N bond distances of 2.23(1) and 2.29(2) Å, respectively. Ammine solvated thallium(III) in liquid ammonia is characterized with ²⁰⁵Tl NMR measurements. Solvents such as liquid ammonia, N,N-dimethylthioformamide (DMTF), trialkyl and triphenyl phosphite and phosphine are strong electron pair donors and thereby able to form bonds with a large covalent contribution with strong electron pair acceptors. A survey of reported structures of ammine, DMTF, trialkyl and triphenyl phosphite and phosphine solvated metal ions in the solid state and solution is presented. The M-N and M-S bond distances in ammine and DMTF solvated metal ions are compared with the M-O bond distance in the corresponding metal ion hydrates, expected to form mainly electrostatic interactions with metal ions. The d¹⁰ metal ions have high ability to form bonds with a high degree of covalency with increasing ability down the group and with decreasing charge of the metal ion. The difference in M-N and M-O bond distances between ammine solvated and hydrated metal ions with the same coordination geometry decreases significantly with the increasing ability of the metal ion to form bonds with a large covalent contribution. This difference correlates well with the covalent bonding index, γ_M²*r. Full article

Metal chelation to bioactive small molecules is a well-established strategy to enhance the biological activity of the resulting complexes. Among the widely explored structural motifs, the combination of prominent metal centers with naturally inspired derivatives has attracted considerable attention. One such promising platform is the flavone scaffold, derived from flavonoids and studied since ancient times. Flavones are plant-derived compounds known for their diverse biological activities and health benefits. They exhibit significant structural variability, primarily through backbone modifications such as hydroxylation. Importantly, coordination of metal ions to hydroxylated flavone cores often improves their natural bioactivities, including anticancer and antimicrobial effects. In this review, we summarize transition metal complexes incorporating hydroxyflavone (OH–F) ligands reported over the past 15 years. We provide a concise overview of synthetic approaches and structural characterization, with a particular emphasis on coordination modes (e.g., maltol-type, acetylacetonate-type, catechol-type, and others). Furthermore, we discuss biological evaluation results, especially anticancer and antimicrobial studies, to highlight the therapeutic potential of these complexes. Finally, we suggest directions for the future development of metal-based agents bearing hydroxyflavone moieties through several critical points in terms of the accuracy, reproducibility, and relevance of biological studies involving metal-based compounds. Full article

Prussian blue analogs (PBAs) are widely recognized as promising candidates for aqueous zinc-ion batteries (AZIBs) due to their stable three-dimensional framework structure. However, their further development is limited by their low specific capacity and unsatisfactory cycling performance, primarily caused by phase transformation during charge–discharge cycles. Herein, we employed a high-entropy strategy to introduce five different metal elements (Fe, Co, Ni, Mn, and Cu) into the nitrogen–coordinated M_a sites of PBAs, forming a high-entropy Prussian blue analog (HEPBA). By leveraging the cocktail effect of the high-entropy strategy, the phase transformation in the HEPBA was significantly suppressed. Consequently, the HEPBA as an AZIB cathode delivered a high reversible specific capacity of 132.1 mAh g⁻¹ at 0.1 A g⁻¹, and showed exceptional cycling stability with 84.7% capacity retention after 600 cycles at 0.5 A g⁻¹. This work provides innovative insights into the rational design of advanced cathode materials for AZIBs. Full article

Planar heaters are designed to deliver uniform heat across broad surfaces and serve as critical components in applications requiring energy efficiency, safety, and mechanical flexibility, such as wearable electronics and smart textiles. However, conventional metal-based heaters are limited by poor adaptability to curved or complex surfaces, low mechanical compliance, and susceptibility to oxidation-induced degradation. To overcome these challenges, we applied a protein-assisted electroless copper (Cu) plating strategy to electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) nanofiber substrates to fabricate flexible, conductive planar heating membranes. For interfacial functionalization, a protein-based engineering approach using bovine serum albumin (BSA) was employed to facilitate palladium ion coordination and seed formation. The resulting membrane exhibited a dense, continuous Cu coating, low sheet resistance, excellent durability under mechanical deformation, and stable heating performance at low voltages. These results demonstrate that the BSA-assisted strategy can be effectively extended to complex three-dimensional fibrous membranes, supporting its scalability and practical potential for next-generation conformal and wearable planar heaters. Full article

In this study, 3-chlorothiophene-2-carboxylic acid (HL) was used as a main ligand to successfully synthesize four novel complexes: [Cu(L)₂(Py)₂(OH₂)₂] (1), [Co(L)₂(Py)₂(OH₂)₂] (2) (Py = pyridine), [{Ni(L)₂(OH₂)₄}₂{Ni(L)(OH₂)₅}]L•5H₂O (3), and [{Co(L)₂(OH₂)₄}₂{Co(L)(OH₂)₅}]L•5H₂O (4). All four compounds were identified by elemental analysis and ESI mass spectrometry, and subsequently characterized by IR spectroscopy, UV-visible diffuse reflectance spectroscopy, electron paramagnetic resonance spectroscopy, thermogravimetric analysis, single-crystal X-ray crystallography, and cyclic voltammetry. X-ray analyses revealed that complexes 1 and 2 exhibit a centrosymmetric pseudo-octahedral coordination geometry; the copper (II) and cobalt (II) metal ions, respectively, are located at the crystallographic center of inversion. The coordination sphere of the copper (II) complex is axially elongated in accordance with the Jahn–Teller effect. Intriguingly, for charge neutrality, compounds 3 and 4 crystallized as three independent mononuclear octahedrally coordinated metal centers, which are two $\left[\mathrm{M}{\mathrm{L}}_2{\left({\mathrm{O}\mathrm{H}}_2\right)}_4\right]$ complex molecules and one ${\left[\mathrm{M}\mathrm{L}{\left({\mathrm{O}\mathrm{H}}_2\right)}_5\right]}^{+}$ complex cation (M = ${\mathrm{N}\mathrm{i}}^{\mathrm{I}\mathrm{I}}$ and ${\mathrm{C}\mathrm{o}}^{\mathrm{I}\mathrm{I}}$, respectively), with the ligand anion ${\mathrm{L}}^{-}$ serving as the counter ion. The anticancer activities of these complexes were systematically assessed on human leukemia K562 cells, lung cancer A549 cells, liver cancer HepG2 cells, breast cancer MDA-MB-231 cells, and colon cancer SW480 cells. Among them, complex 4 shows significant inhibitory effects on leukemia K562 cells and colon cancer SW480 cells. Full article

Polyphenolic compounds, such as flavonoids, possess important structural and physico-chemical characteristics that in combination with their biological properties render them an important class of natural compounds with medicinal prospects. Chrysin is a well-known flavone with antioxidant activity and a multitude of other beneficial properties. The potential of flavonoids to coordinate with metal ions leads to derivatives with enhanced biological profile. Within this framework, four novel heteroleptic complexes of cobalt and nickel with chrysin and the aromatic bidentate chelating agents 2,2′-bipyridine and 1,10-phenanthroline were synthesized, as well as physico-chemically and structurally characterized. The in vitro antioxidant efficiency of the synthesized complexes was examined via the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. All complexes showed notable radical scavenging capacity comparable to that of ascorbic acid, providing the incentive for further investigation of their therapeutic potential. Full article

In this study, we present the preparation and characterization of a novel thallium(I) coordination compound of the polyether ionophorous antibiotic salinomycin (SalH). The complex [TlSal(H₂O)] exists as two subunits, SalTl1 and SalTl2, which differ slightly in their structural parameters. Salinomycin acts in a pentadentate coordination mode through oxygen donor atoms, and the six-fold arrangement around the metal centers is completed by interaction with a water molecule. In the overall complex structure, the two mononuclear species SalTl1 and SalTl2 are connected via a hydrogen bond network by a third water molecule. The inclusion of the heavy metal ion into the structure of the polyether ionophore reduces its biological activity against Gram-positive microorganisms and cervical cancer cells at in vitro conditions. Full article

The phototherapeutic applications of porphyrin-based nanoscale metal–organic frameworks (nMOFs) are limited by the poor penetration of conventional excitation light sources into biological tissues. Radiodynamic therapy (RDT), which directly excites photosensitizers using X-rays, can overcome the issue of tissue penetration. However, RDT faces the problems of low energy conversion efficiency, requiring a relatively high radiation dose, and the potential to cause damage to normal tissues. Researchers have found that by using some metals with high atomic numbers (high Z) as X-ray scintillators and coordinating them with porphyrin photosensitizers to form MOF materials, the excellent antitumor effect of radiotherapy (RT) and RDT can be achieved under low-dose X-ray irradiation, which can not only effectively avoid the penetration limitations of light excitation methods but also eliminate the defect issues associated with directly using X-rays to excite photosensitizers. This review summarizes the relevant research work in recent years, in which researchers have used metal ions with high Z, such as Hf⁴⁺, Th⁴⁺, Ta⁵⁺, and Bi³⁺, in coordination with carboxyl porphyrins to form MOF materials for combined RT and RDT toward various cancer cells. This review compares the therapeutic effects and advantages of using different high-Z metals and introduces the application of the heavy atom effect. Furthermore, it explores the introduction of a chemodynamic therapy (CDT) mechanism through iron coordination at the porphyrin center, along with optimization strategies such as oxygen delivery using hemoglobin to enhance the efficacy of these MOFs as radiosensitizers. This review also summarizes the potential of these materials in preclinical applications and highlights the current challenges they face. It is expected that the summary and prospects outlined in this review can further promote preclinical biomedical research into and the development of porphyrin-based nMOFs. Full article

A novel metal–organic framework based on zinc ions, designated as Zn-URJC-12, has been synthesized and applied for the first time in the cycloaddition reaction between carbon dioxide and epoxides. This MOF is constructed from two different organic linkers: 5-aminoisophthalic acid and 4,4′-biphenyldicarboxylic acid. The framework features –NH₂ functional groups coordinated to Zn(II) centers, as confirmed by single-crystal X-ray diffraction analysis. Zn-URJC-12 demonstrates exceptional chemical stability in polar organic solvents, such as methanol, while maintaining thermal stability up to 250 °C. The material exhibits high catalytic efficiency in the cycloaddition of CO₂ with epoxides, achieving yields of 100% and 76% for propylene oxide and allyl glycidyl ether, respectively. Additionally, Zn-URJC-12 maintains its structural integrity and catalytic performance during five successive reaction cycles. These findings underscore Zn-URJC-12 as a promising heterogeneous catalyst for the valorization of CO₂ into cyclic carbonates. Full article

The persistent contamination of aquatic environments by heavy metals, particularly Pb²⁺, Cd²⁺, and Cu^2+, poses a serious global threat due to their toxicity, persistence, and bioaccumulative behavior. In response, low-cost and eco-friendly adsorbents are being explored, among which CaCO₃-based biocomposites derived from mollusk shells have shown exceptional performance. In this study, a hybrid biocomposite composed of poly(vinyl alcohol) (PVA) and oyster shell-derived CaCO₃ was computationally investigated using Density Functional Theory (DFT) to elucidate the electronic and structural basis for its high metal-removal efficiency. Calculations were performed at the B3LYP/6-311++G(d,p), M05-2X/6-311+G(d,p), and M06-2X/6-311++G(d,p) levels using GAUSSIAN 16. Among them, B3LYP was identified as the most balanced in terms of accuracy and computational cost. The hybridization with CaCO₃ reduced the HOMO-LUMO gap by 20% and doubled the dipole moment (7.65 Debye), increasing the composite’s polarity and reactivity. Upon chelation with metal ions, the gap further dropped to as low as 0.029 eV (Cd²⁺), while the dipole moment rose to 17.06 Debye (Pb²⁺), signaling enhanced charge separation and stronger electrostatic interactions. Electrostatic potential maps revealed high nucleophilicity at carbonate oxygens and reinforced electrophilic fields around the hydrated metal centers, correlating with the affinity trend Cu²⁺ > Cd²⁺ > Pb²⁺. Fukui function analysis indicated a redistribution of reactive sites, with carbonate oxygens acting as ambiphilic centers suitable for multidentate coordination. Natural Bond Orbital (NBO) analysis confirmed the presence of highly nucleophilic lone pairs and weakened bonding orbitals, enabling flexible adsorption dynamics. Furthermore, NCI/RDG analysis highlighted attractive noncovalent interactions with Cu²⁺ and Pb²⁺, while FT-IR simulations demonstrated the formation of hydrogen bonding (O–H···O=C) and Ca²⁺···O coordination bridges between phases. Full article

Bio-based ionic conductive hydrogels have attracted significant attention for use in wearable electronic sensors due to their inherent flexibility, ionic conductivity, and biocompatibility. However, achieving a balance between high ionic conductivity and mechanical robustness remains a significant challenge. In this study, we present a simple yet effective strategy for fabricating a polyelectrolyte–chitin double-network hydrogel (CAA) via the copolymerization of acrylamide (AM) and acrylic acid (AA) with chitin in an AlCl₃-ZnCl₂-H₂O ternary molten salt system. The synergistic interactions of dynamic metal ion coordination bonds and hydrogen bonding impart the CAA hydrogel with outstanding mechanical properties, including a fracture strain of 1765.5% and a toughness of 494.4 kJ/m³, alongside a high ionic conductivity of 1.557 S/m. Moreover, the hydrogel exhibits excellent thermal stability across a wide temperature range (−50 °C to 25 °C). When employed as a wearable sensor, the hydrogel demonstrates a rapid response time (<0.2 s), remarkable durability over 95 cycles with less than 5% resistance drift, and high sensitivity in detecting various human joint motions (e.g., finger, knee, and elbow bending). It presents a scalable strategy for biomass-derived flexible electronics that harmonizes mechanical robustness with electromechanical performance. Full article

Phenylene-based bis-oxamate polydentate ligands offer a unique opportunity for creating a large variety of coordination compounds, in which paramagnetic metal ions are strongly magnetically coupled. The employment of imino nitroxyl (IN) radicals as supplementary ligands confers numerous benefits, including the strong ferromagnetic interaction between Ni and IN. Furthermore, the chelating IN can act as a capping ligand, thereby impeding the formation of coordination polymers. In this study, we present the molecular and crystal structure and experimental and theoretical magnetic behavior of an exceptional neutral trinuclear complex [Ni(L³⁻)₂(IN)₃]∙5CH₃OH (1) (L is N,N′-1,3-phenylenebis-oxamic acid; IN is [4,4,5,5-tetramethyl-2-(6-methylpyridin-2-yl)-4,5-dihydro-1H-imidazol-1-yl]oxidanyl radical) with a cyclic triangular arrangement. Moreover, in this compound three Ni²⁺ ions are linked by the two bis-oxamate ligands playing a rare tritopic function due to an unprecedented triple deprotonation of the related meta-phenylene-bis(oxamic acid). The main evidence of such a deprotonation of the ligand is the neutrality of the cluster, since there are no anions or cations compensating for its charge in the crystals of the compound. Despite the presence of six possible magnetic couplings in the trinuclear cluster 1, its behavior was reproduced with a high degree of accuracy using a three-J model and ZFS, under the assumption that the three different Ni-IN interactions are equal to each other, whereas only two equivalent-in-value Ni-Ni interactions were taken into account, with the third one being equated to zero. Our study indicates the presence of two opposite-in-nature types of magnetic interactions within the triangular core. DFT and CASSCF/NEVPT2 calculations were completed to support the experimental magnetic data simulation. Full article