Search Results (11,696)

Vitamin C, a water-soluble micronutrient, is one of the most widely used dietary supplements pertaining to its vital role in maintaining overall human health, particularly through its potent antioxidant and immune-supportive functions. This mini review summarizes key pharmacokinetic constraints of vitamin C and evaluates formulation strategies aimed at improving its systemic availability. Achieving sustained optimal plasma levels of vitamin C remains challenging due to its dose-dependent absorption, tissue saturation, rapid renal clearance, and short half-life. These pharmacokinetic limitations restrict systemic retention, with high oral doses providing only marginal increases in plasma concentrations and necessitating multiple daily administrations. Conventional vitamin C supplements show efficient absorption only at low to moderate doses, while higher intakes are restricted by transporter saturation and increased renal excretion. Alternative delivery systems such as liposomal encapsulation, esterified derivatives, nano-emulsions, and co-formulations with bioenhancers have been examined; however, evidence for prolonged systemic retention remains inconsistent. The sustained-release formulation of vitamin C shows more reliable outcomes, demonstrating prolonged plasma exposure, higher steady-state concentrations, and potential for improved compliance through reduced dosing frequency. While further robust comparative studies are needed, current evidence suggest that advanced formulation approaches, particularly sustained-release delivery, may help overcome these pharmacokinetic limitations, thereby supporting improved clinical utility of vitamin C supplementation. Full article

Medicinal plants are widely used in traditional medicine because of their bioactive compounds with therapeutic potential. The semidesert Mexican species Flourensia cernua, Artemisia ludoviciana, and Phoradendron californicum have been traditionally employed as infusions for gastrointestinal disorders. In this study, chemical composition, infusion extraction, phytochemical profiling, antioxidant capacity, and antiparasitic and antibacterial activity were evaluated. The extracts were characterized via HPLC–MS, encapsulated in agar–agar beads, and subjected to in vitro simulated digestion. A. ludoviciana presented the highest content of hydrolysable and condensed tannins (5473.33 ± 305.5 mg GAE/100 g; 959.58 ± 14.6 mg CE/100 g, respectively). F. cernua presented the highest flavonoid concentration (582.67 ± 16.90 mg CE/100 g). The highest antioxidant activity was observed in P. californicum (IC₅₀ 74.18 ± 18.43 μg TE/mL in DPPH; IC₅₀ 333.38 ± 56.36 μg TE/mL in ABTS). In terms of antiparasitic effects, A. ludoviciana extracts presented the lowest IC₅₀ value (0.51 ± 0.01 mg/mL), indicating the highest antiparasitic activity. Antibacterial assays revealed that F. cernua had the greatest inhibitory effect on E. coli (79.60%) and S. aureus (78.40%). Encapsulation preserved extract integrity, although simulated digestion resulted in limited compound release, with hydrolysable tannins being the most released. Overall, P. californicum presented the strongest antioxidant response, and encapsulation was confirmed as an effective strategy to preserve extract integrity. Full article

Nicotinamide adenine dinucleotide (NAD⁺) boosting can sustain energy metabolism and neurovascular stability in the retinal tissue. Depletion of NAD⁺ is linked to the development of pathological retinal conditions, such as age-related macular degeneration (AMD) and diabetic retinopathy (DR). Mitochondrial dysfunction, oxidative stress, and inflammation occur in these diseases. This review summarizes substantial evidence of therapeutic NAD⁺ boosters, including nicotinamide, nicotinamide mononucleotide, or nicotinamide riboside. They help improve mitochondrial function and lessen neurovascular injury. We also emphasize the importance of natural products and sirtuins in facilitating cytoprotective effects through the regulation of mitochondrial balance and inflammation. Developments in drug delivery methods, such as nanoparticle encapsulation and targeted eye treatments, are promising for enhancing the bioavailability and effectiveness of NAD⁺ boosters. The novelty of this work is its combination of mechanistic insights regarding NAD⁺ metabolism with efficacy data from preclinical studies. Furthermore, natural products may work together to boost their therapeutic effects against retinal damage. Together, our review article highlights NAD⁺ metabolism as a potential therapeutic target for addressing retinal degeneration and maintaining vision in aging, neurologic disorders, and various metabolic diseases, including diabetes. Full article

This study reports measurements of density, viscosity, and ternary mutual diffusion coefficients (D₁₁, D₁₂, D₂₁, D₂₂) for aqueous solutions containing two antibiotics—sulfamethoxazole (SMX) or trimethoprim (TMP) (component 1)—in the presence of various cyclodextrins (α–CD, β–CD, and γ–CD) (component 2) at 298.15 K. The relative viscosity data were analyzed by fitting to a second-order Jones-Dole equation via a least-squares regression to obtain the viscosity B coefficients. Apparent molar volumes (V_ϕ) were derived from the measured densities (ρ) for SMX and TMP in aqueous media. Furthermore, partial molar volumes of transfer at infinite dilution, ΔV_ϕ⁰, were evaluated to elucidate solute–solvent interactions within the ternary systems investigated. Nonzero ΔV_ϕ⁰ values, positive viscosity B coefficients, and negative cross-diffusion coefficients (D₁₂ and D₂₁), evidencing significant coupled diffusion, collectively indicate strong interactions between the antibiotics and cyclodextrins, consistent with host–guest complex formation. Full article

In response to the problem of high energy consumption caused by inefficient temperature control of energy storage aggregates in traditional building envelope structures, this study developed a decanoic acid–stearic acid composite phase-change ceramsite aggregate to improve the thermal performance of buildings and promote the utilization of solid waste resources. Based on the theory of minimum melting, composite phase-change materials were screened through thermodynamic models. The capric acid–stearic acid (CA-SA) melt system, whose theoretical phase-transition temperature falls within the building indoor thermal environment control range (18–26 °C), was preferred as the experimental object of this study, and its characteristics were verified through step cooling curves and thermal property tests. Subsequently, the ceramsite adsorption process was optimized, and the encapsulation process was studied. Finally, the encapsulation performance was evaluated through thermal stability and stirring crushing rate tests. The results showed that the phase-transition temperature of the decanoic acid–stearic acid melt system was 24.83 °C, which accurately matched the indoor thermal environment control requirements. The ceramsite particles treated by a physical vibrating screen can reach equilibrium after 30 min of adsorption at room temperature and pressure, which is both efficient and economical. The encapsulation layer of sludge biochar cement slurry with a water–cement ratio of 0.5 and a biochar content of 3% has both thermal conductivity and encapsulation integrity. The thermal stability test showed that the percentage of leakage of sludge biochar cement slurry and epoxy resin encapsulated aggregates was 0%, and the thermal stability rating was “very stable”. However, the percentage of leakage of unencapsulated and spray-coated encapsulated aggregates was as high as 193% and 40%, respectively. The results of the mixing and crushing rate test show that although the mixing and crushing rate of sludge biochar cement slurry encapsulation is slightly higher, its production cost is much lower than that of epoxy resin, and it is also environmentally friendly. This study improves the thermal performance of buildings by using composite phase-change ceramsite aggregate, and simultaneously realizes the resource utilization of sludge biochar, providing a solution for building energy saving and efficiency that combines environmental and engineering value. Full article

Background: Although teriparatide is efficacious, its once-daily subcutaneous injections cause local adverse events, inconvenience, and higher cost, limiting long-term adherence. Therefore, this research aims to engineer a pH-responsive oral formulation of teriparatide for osteoporosis therapy. Methods: A layered silicate nanocomplex was obtained by spontaneous self-assembly of teriparatide (Teri) with 3-aminopropyl magnesium phyllosilicate (AC). The nanocomplex (AC-Teri) was then coated with a 1:1 blend of two polymethacrylic acid derivatives (Eudragit^® L100 and Eudragit^® S 100) to provide pH-triggered drug release along the gastrointestinal tract. Results: AC-Teri and the coated nanocomplex (EE/AC-Teri) displayed high encapsulation efficiency (>90%) with narrow size distributions. In a stepwise buffer transition system, EE/AC-Teri demonstrated pH-dependent release, with less than 25% drug liberated at pH 1.2, approximately 54% at pH 6.8, and 74% at pH 7.4 over 24 h. Particle size and ζ-potential of EE/AC-Teri shifted in parallel with dissolution of the outer polymer shell. EE/AC-Teri also protected the peptide against enzymatic degradation, preserving the secondary structure of encapsulated teriparatide in simulated intestinal fluids. Compared with free drug, EE/AC-Teri enhanced transcellular drug permeation 2.7-fold in Caco-2 cells. In dexamethasone-induced osteoporotic rats, oral EE/AC-Teri significantly stimulated bone formation while suppressing resorption; micro-CT and histology confirmed recovery of trabecular architecture. Conclusions: EE/AC-Teri represents a promising oral teriparatide formulation for the effective management of osteoporosis. Full article

This systematic review examines the impact of vegetable oil consumption, such as extra virgin olive, olive, soybean, palm olein, corn, and camellia seed oils, on both human and animal health, alongside factors influencing oil quality and safety. A variety of studies were included, such as clinical trials, cohort studies, animal experiments, and reports on production methods and contamination (polycyclic aromatic hydrocarbons (PAHs) and heavy metals). The literature search was performed in scientific databases indexed up to September 2025, and risk of bias was assessed using specific tools appropriate for each study design. The findings suggest that, among the oils studied, extra virgin olive oil showed the most consistent benefits, including improvements in endothelial function, lipid profiles, weight management, and reduced mortality in humans. Animal studies corroborate hepatoprotective effects and weight regulation benefits. Oil quality is influenced by genetic, environmental, and technological factors, including cultivar selection, pollination, post-harvest handling, and extraction techniques (cold, hot, DIC, MFA, encapsulation) and refining processes, which can affect both nutritional benefits and contaminant levels. Although contaminants such as PAHs and heavy metals (Cd, Pb, As) are generally below regulatory thresholds, some contexts may present health risks. High-quality vegetable oils confer cardiovascular, metabolic, and hepatic benefits. However, their contribution to public health relies on strict production practices, continuous monitoring of contaminants, and the implementation of technological innovations to ensure both safety and optimal health outcomes. Full article

The meat industry faces significant economic losses and environmental impacts due to spoilage and waste, much of which results from inadequate, delayed, or inefficient quality assessment. Traditional methods used for assessing meat quality are often time-consuming, labor-intensive, and lack the ability to provide real-time information, making them insufficient for modern supply chains that demand safety, freshness, and minimal waste. Recent advances in nanotechnology position nanofibers (NFs) as promising materials for addressing these challenges through smart sensing and active packaging. NFs, characterized by their high surface-to-volume ratio, tunable porosity, and small diameter, enable superior encapsulation and immobilization of sensing agents. These features improve the efficiency of colorimetric indicators, electronic noses, biosensors and time–temperature indicators. Electrospun NFs functionalized with metallic nanoparticles can detect contaminants such as antibiotics and hormones, while polymeric NFs embedded with reduced graphene oxide act as electrodes for advanced biosensing. Freshness indicators based on pH and nitrogenous compounds demonstrate real-time spoilage detection through visible color changes. This review explores nanofiber fabrication methods, their integration into sensing systems, and their potential to advance rapid, sustainable, and cost-effective meat quality monitoring. Full article

Pitaya peels are an underutilized by-product rich in antioxidant phenolics and betalains but highly unstable under environmental and gastrointestinal conditions. This study aimed to produce bioactive-rich particles with improved bioaccessibility by applying ultrasound-assisted extraction (UAE) followed by freeze-drying encapsulation with maltodextrin (MD) and gum Arabic (GA) at different ratios (MD:GA 100:0, 75:25, 50:50, 25:75, 0:100, w/w). A rotatable central composite design (pH 4–8, time 10–50 min) was applied to optimize UAE conditions. Optimum conditions (pH 6.2, 35 min) yielded a pitaya peel extract with TPC 166.85 mg GAE·100 g⁻¹ DW. Although the betalain model was not significant, contents ranged from 30.20 to 51.99 mg·100 g⁻¹ DW across treatments. Particles produced with GA only (G100) had the highest phenolic (316.33 mg GAE∙100 g⁻¹ DW) and betalain (17.58 mg·100 g⁻¹ DW) contents, high solubility (~80%), low hygroscopicity (~11 g H₂O·100 g⁻¹ DW), and amorphous morphology. G100 showed enhanced in vitro bioaccessibility of betalains and phenolics compared to the non-encapsulated extract (p < 0.05). Betalain bioaccessibility decreased in the intestinal phase (~55%), consistent with pH-driven degradation, while phenolic bioaccessibility was higher (~140%). Overall, gum Arabic proved to be an effective carrier for stabilizing pitaya peel bioactives, supporting their valorization into functional food and nutraceutical ingredients. Full article

Background/Objectives: Triple-negative breast cancer (TNBC) is among the most aggressive subtypes, lacking estrogen, progesterone, and HER2 receptors, which limits the efficacy of targeted therapies. Standard treatments often fail due to rapid drug resistance and poor long-term outcomes. Repurposing approved drugs with anticancer potential offers a promising alternative. Disulfiram (DSF), an FDA-approved alcohol-aversion drug, forms a copper complex [Cu(DDC)₂] with potent anticancer activity, but its clinical translation is hindered by poor solubility, limited stability, and inefficient delivery. Methods: Here, we present an amphiphilic dendrimer-stabilized [Cu(DDC)₂] nanoparticle (NP) platform synthesized via the stabilized metal ion ligand complex (SMILE) method. Results: The optimized nanocarrier achieved high encapsulation efficiency, enhanced serum stability, and potent cytotoxicity against TNBC cells. It induced immunogenic cell death (ICD) characterized by calreticulin exposure and ATP release, while modulating the tumor microenvironment by downregulating MMP-3, MMP-9, VEGF, and vimentin, and restoring epithelial markers. In a 4T1 TNBC mouse model, systemic [Cu(DDC)₂] NP treatment significantly inhibited tumor growth without combinational chemo- or radiotherapy. Conclusions: This DSF-based metal–organic NP integrates drug repurposing, immune activation, and tumor microenvironment remodeling into a single platform, offering strong translational potential for treating aggressive breast cancers. Full article

Background/Objectives: Propofol is frequently used as an intravenous anesthetic and is rapidly metabolized. Therefore, if it could be administered non-invasively (e.g., orally) as premedication, it might hasten emergence from anesthesia, thereby improving patient safety. However, it undergoes extensive first-pass metabolism in the liver and intestines, limiting the route for premedication. We evaluated whether intranasal delivery of a propofol-encapsulated liposome solution improves systemic exposure and bioavailability in rabbits. Methods: A propofol-encapsulated liposome solution was administered to rabbits via the intravenous, oral, and intranasal routes. Blood propofol concentrations were measured for up to 60 min after administration and the area under the concentration–time curve (AUC_0–60) and bioavailability of the propofol-encapsulated liposome solution were compared with those of the non-encapsulated propofol formulation. The differences were tested by two-way analysis of variance (ANOVA) with Šidák’s post hoc multiple-comparisons test and the Mann–Whitney test (α = 0.05). Results: The AUC_0–60 for blood propofol concentrations after intravenous administration was significantly higher with the propofol-encapsulated liposome solution than with the non-encapsulated propofol formulation (3038.8 ± 661.5 vs. 1929.8 ± 58.2 ng·min/mL; p = 0.0286). By contrast, no increase in blood propofol concentrations was observed after oral administration, whereas intranasal administration increased blood propofol concentrations and yielded significantly higher bioavailability compared with the non-encapsulated propofol formulation (16.4 ± 7.3% vs. 2.0 ± 1.2%; p = 0.0286). Conclusions: The findings of the present study suggest that intranasal liposomal propofol increased systemic availability compared with a non-encapsulated formulation, supporting further evaluation as a candidate premedication approach for propofol. Full article

The incorporation of bioactive compounds into food products represents a promising approach to enhance their functional and health-promoting properties. However, many bioactive compounds, such as polyphenols, essential oils, carotenoids, and omega-3 fatty acids, are highly sensitive to environmental factors, including temperature, oxygen, and light, which limits their direct application in the food industry. Microencapsulation has emerged as an innovative strategy to overcome these challenges by protecting bioactive compounds, improving their stability, controlling their release, and masking undesirable flavors or odors. This article reviews recent advances in microencapsulation techniques, including spray-drying, freeze-drying, coacervation, and innovative methods such as nanoencapsulation and electrospinning. Particular attention is given to the influence of encapsulated bioactive compounds on the physicochemical characteristics, texture, color, and sensory attributes of various food matrices. Furthermore, the paper highlights industrial perspectives, emphasizing the scalability of these techniques, regulatory considerations, and their role in the development of clean-label, functional, and sustainable food products. The findings underline the potential of microencapsulation as a key technology for the next generation of functional foods, bridging consumer expectations with industrial feasibility. Full article

The present study demonstrates encapsulation of Coriandrum sativum essential oil in chitosan nanoemulsion and its effectiveness against fungal infestation and fumonisin B₁ (FB₁)- and B₂ (FB₂)-mediated biodeterioration of stored rice samples. Mycoflora analysis of different rice varieties revealed fungal occurrence and Fusarium proliferatum-BRC-R2 as the most toxigenic strain with highest FB₁- and FB₂-producing potentiality. GC-MS analysis of Coriandrum sativum essential oil (CEO) revealed linalool as the major component. The CEO-loaded chitosan nanoemulsion (Ne-CEO) was characterized by Scanning electron microscopy, X-ray diffractometry, Dynamic light scattering, and Fourier transform infrared spectroscopy. The Ne-CEO showed better antifungal and anti-fumonisin effectiveness as compared to unencapsulated CEO. The antifungal mechanism was associated with reduced ergosterol content, efflux of ions, proteins, nucleic acids, and destruction of plasma membrane integrity. The in silico interaction of linalool with Fum 1 protein confirmed the molecular action of anti-fumonisin activity. Additionally, the Ne-CEO displayed improved antioxidant activity and promising antifungal and anti-fumonisin activity during in situ investigation in rice samples (Gobindobhog variety) along with inhibition of the deterioration of carbohydrate, protein content, and lipid peroxidation without altering organoleptic properties and seed germination potentiality. Overall, the investigation strengthens the potentiality of Ne-CEO as a novel preservative of stored food commodities. Full article

Rambutan (Nephelium lappaceum) shell, an agro-industrial by-product, is a rich source of phenolic acids and minor anthocyanins, but its direct use is limited by instability and low bioavailability. We extracted phenolic-rich fractions and produced maltodextrin microcapsules by spray drying, then confirmed chemical entrapment and amorphization by FTIR, SEM, and XRD. The formulation showed high encapsulation efficiency and high antioxidant capacity (DPPH), selective bactericidal activity against Pseudomonas aeruginosa and Burkholderia cepacia, and strong inhibition of Staphylococcus aureus and Listeria monocytogenes biofilms, while exhibiting negligible hemolysis (<2%) across tested concentrations. Antitumor effects were moderate with low selectivity in vitro, indicating that phenolic-acid-driven redox modulation may require fractionation or delivery optimization for oncology applications. Overall, spray-dried microcapsules provided structural stability and safety while concentrating multifunctional activities relevant to food and biomedical uses. By valorizing a tropical waste stream into a bioactive, hemocompatible ingredient, this work aligns with societal goals on health and sustainable production (SDG 3 and SDG 12) and offers a scalable route to deploy underutilized phenolic resources. Full article

Silver nanoparticles (AgNPs) are extensively utilized in cosmetics and healthcare products, creating an urgent need for sensitive quantification methods. We report the first application of a metal–organic framework for electrochemical AgNPs sensing in cosmetic samples. A glassy carbon electrode was modified with polyethyleneimine-encapsulated MOF-235 (PEI-MOF-235/GCE); the PEI layer enriches AgNPs through Ag–N coordination, whereas the high-surface-area MOF catalyzes their oxidative dissolution. Under optimized conditions (catalyst loading 1.4 µg mm⁻³, pH 4.3 PBS), differential-pulse voltammetry provided a linear range of 10–100 ng L⁻¹ and a detection limit of 3.93 ng L⁻¹ (S/N = 3). The sensor exhibited excellent stability (RSD ≤ 4.7%) and good anti-interference capability toward common aquatic ions. Compared with a standard HPLC method, recoveries in spiked cosmetic samples were 97.9–102.6%. This MOF-based strategy offers a sensitive, selective, and field-deployable platform for routine monitoring of trace AgNPs. Full article