Preparation, characterization, and application of a novel coated graphite rod thorium selective electrode based on thorium 8-hydroxyquinolate [thorium oxinate, Th(C9H6NO)4.2H2O] complex ionophore as a sensing material, dioctylphthalate (DOP) as a sol...
New Plastic membrane ion-selective electrode for trimetazidine dihydrochloride based on trimetazidinium-tetraphenylborate was prepared. The electrode exhibited mean calibration graph slope of 29.5 mV per decade of (TrimCl2) concentration at 25°C. The...
Carbon nanofiber-decorated graphite rods are introduced as effective and low-cost anodes for industrial wastewater-driven microbial fuel cells. Carbon nanofiber deposition on the surface of the graphite rods could be performed by the electrospinning...
Copper-clad aluminum rods are usually fabricated using hydrostatic extrusion, since during direct and indirect extrusion fracture of the copper sleeve is difficult to avoid. In this study, different die surface topographies and lubrication conditions...
This paper aims to evaluate the effect of pre-coating of forged parts on decarburization in the die forging process. The studies consisted of three stages. In the first instance, different coatings were tested under laboratory conditions by heating s...
In furnaces with different heating elements, Nb–Si based ultrahigh-temperature alloy rods were re-melted in pure yttria mold shells and zirconia face-coat mold shells at 1850 °C for 30 min. The results evidenced that in the furnace with a t...
The design of an indicator electrode made of carbon paste of ergonomic design for the voltammetric determination of a number of substances of inorganic and organic origin is described. The electrode is made of a graphite rod with a diameter of 6 mm a...
This article examines the weldability of ductile cast iron when the root weld is applied with a tungsten inert gas (TIG) welding process employing an Inconel 625 source rod, and when the filler welds are applied with electrodes coated with 97.6% Ni....
In this work we present the preparation of graphene material by exfoliation of graphite rods via pulses of current in electrolyte, containing a mixture of boric acid (0.05 M) and sodium chloride (0.05 M). The material was morphologically and structur...