Search Results (213)

Two new anthraquinone derivatives, (±)-1′-O-methyl-6-chloroaverantin (1a and 1b) and 6-chloroaverythrin (2), and one new diphenyl ether 1-((E)-but-2-en-2-yl)-3,8-dihydroxy-6-((E)-4-hydroxybut-2-en-2-yl)-4,9-dimethyl-11H-dibenzo[b,e][1,4]dioxepin-11-one (3), along with six known compounds, were isolated from the fungus Aspergillus sp. SCSIO 41331 collected from the deep-sea sediment in the cold-seep area of the South China Sea. Elucidation of planar structures was achieved via 1D and 2D NMR and mass spectrometry, whereas stereochemistry was validated through optical rotation and NOE correlations, chiral phase HPLC analysis and NMR calculation. All compounds were assessed for antitumor activity, among which compound 4 displayed moderate antiproliferative activity against HT29 cells and suppressed colony expansion. Full article

Lactic acid is a widely used component in cosmetics such as hair care products. High concentration of lactic acid or inappropriate enantiomeric form can have a negative impact on the skin. This study focuses on the development of methods of analysis for the separation, enantioseparation and determination of lactic acid in cosmetics and the confirmation of its enantiomeric form. Achiral reversed-phase high-performance liquid chromatography (RP-HPLC) on a C18 stationary phase and hydrophilic interaction liquid chromatography (HILIC) on an amino-propyl stationary phase, combined with diode array detection (DAD; 210 nm), were applied for analysis. Chiral HPLC-DAD on a teicoplanin-based stationary phase was an effective method for verification of the enantiomeric form, confirming L-lactic acid in tested samples. The complex samples were treated by solid-phase extraction using an anion-exchange adsorbent. Recovery studies showed good results, 76.1–91.8% (RSD ≤ 5.0%). The methods provide linearity of response in the concentration ranges tested (R² > 0.996). This study demonstrated several approaches to the HPLC-DAD determination of lactic acid and proposed an effective sample preparation procedure. Developed methods were rapid, simple and applicable in the routine analysis of cosmetics for monitoring the safety of products. Full article

The separation of chiral compounds is a challenging issue in various fields, e.g., biochemistry, the pharmaceutical industry, food chemistry, forensics, agriculture, etc. Very often, one of the two enantiomers can exhibit different activity. Therefore, the separation and analysis of enantiomers requires analytical methods for, e.g., quality control, pharmacokinetic studies, etc. Their separation is usually performed by high-performance liquid chromatography (HPLC), gas chromatography, supercritical fluid chromatography and microfluidic techniques such as capillary electrophoresis (CE), nano-liquid chromatography, and capillary electrochromatography (CEC). CEC is a modern analytical technique that combines the features of HPLC and CE (high selectivity and high chromatographic efficiency, respectively). The enantiomers are moved to the detector by an electroosmotic flow generated by the application of high voltage. In this review, the main features of CEC, and the basic principles of enantiomer separation are briefly summarized. Selected applications (appearing 2023–2026 February) employing packed capillaries, and monolithic and open tubular columns, are presented and discussed. Full article

This study addressed the issue of insufficient activity in CALB lipase during the catalytic synthesis of key chiral intermediates for moxifloxacin. A structure-guided protein engineering strategy was employed to systematically modify its functional domains. Through molecular dynamics simulations of CALB-I189K, multiple regions exhibiting high conformational flexibility were preliminarily identified. Subsequently, by integrating 3D structural alignment with active site pocket distance analysis, the functionally most critical region (143–146) was selected. A site-directed saturation mutation library was constructed specifically targeting this region. Building upon the previously reported CALB-I189K, a mutant I189K/L144R/A146K was ultimately obtained through high-throughput screening combined with chiral HPLC validation. This mutant maintains excellent stereoselectivity (E = 206.52) while enhancing catalytic efficiency (k_cat/Κ_m) to 273.73 min⁻¹·mM⁻¹, approximately 4.5-fold that of I189K. At a substrate concentration of 1 M, it achieves 50% conversion within 2.6 h, demonstrating kinetic resolution capabilities approaching industrial standards. Molecular simulation analysis indicates that the L144R and A146K mutations synergistically enhance catalytic performance primarily by optimizing spatial distances between catalytic residues. This study not only provides a high-performance catalyst for the efficient biosynthesis of moxifloxacin chiral intermediates but also offers new insights for enzyme rational design based on dynamic structural information. Full article

In addition to well-known traditional synthetic illicit drugs like cocaine, amphetamines, and heroin, an increasing number of new psychoactive substances (NPS) are appearing on the global drug market. Among them, cathinones represent a prominent class. These amphetamine-like compounds contain a stereogenic center, resulting in the possible presence of two enantiomers. Pure enantiomers of cathinone derivatives are not commonly available, and their production is cost-intensive. Thus, there is very little knowledge about the possible distinct effects of single enantiomers of cathinones. The objective of this study was to evaluate the stability of a set of eight cathinone derivatives, namely 3-methylethcathinone, 3-methylmethcathinone, 4-methylethcathinone, 4-methylmethcathinone, ethylone, 3,4-trimethylene-α-ethylaminovalerophenone, 3,4-tetramethylene-α-pyrrolidinovalerophenone, and 3,4-trimethylene-α-pyrrolidinobutiophenone, over a six-month period. Any racemization that may have occurred under different storage and solution conditions was monitored and compared. Pure enantiomeric fractions were collected on a multi-milligram scale using semi-preparative HPLC under isocratic normal-phase conditions. A Phenomenex Lux^® i-Cellulose-5, 5 μm 250 × 10 mm column containing cellulose tris(3,5-dichlorophenylcarbamate) served as the chiral selector. The tests showed that aqueous conditions, pH, temperature, chemical structure, sunlight, and oxygen influence compound stability. The long-term storage of cathinone derivative enantiomers was found to be optimal as solids under deep-freezing conditions or in a slightly acidified solvent where they are protected from air and light. Full article

Companilactobacillus farciminis KUJ 25-S was isolated from fermented fish and identified using 16S rRNA gene sequencing with 30.0 g/L of L-LA (L-lactic acid), with 97% LA per sum of DL-LA. The characteristics of LA and its stereoisomers were confirmed using TLC, chiral-HPLC, and enzymatic techniques. Based on various conditions using liquid MRS broth (static condition, glucose 10%, NaCl 5%, 37 °C for 48 h), the highest growth and LA formation of the culture were at a low temperature (25 °C) and decreased at 37, 45, and 55 °C, respectively. The broth could grow and produce acid at an initial pH in the range 4–11, with a low initial pH of 4 promoting the highest LA formation. LA formation and growth were inversely proportional to the NaCl concentration in the 0.5–30% range. High glucose concentrations suppressed LA formation. The growth-promotion effect varied with glucose concentration (5–40%), with the optimum concentration for LA production being 20% glucose. On the other hand, if used in microoxic conditions, the absence of NaCl was more favorable to acidification than the addition of NaCl (5% NaCl). C. farciminis KUJ 25-S was proposed as a suitable method to produce L-LA based on using the appropriate line for further industrial use. Full article

Two new chromone derivatives, cnidimols I and J (1 and 2), together with ten known aromatic derivatives (3–12), were isolated from the Beibu Gulf algicolous fungus Aspergillus versicolor GXIMD 02518. Their structures were determined by comprehensive physicochemical and spectroscopic data interpretation. The absolute configurations of 1 and 2 were accomplished by ECD calculations and X-ray diffraction analysis. Compound 1 was obtained as a pair of enantiomers, which were separated by chiral-phase HPLC analysis. Notably, 3,7-dihydroxy-1,9-dimethyldibenzofuran (6) displayed significant inhibition in LPS-induced NF-κB luciferase activity in RAW 264.7 macrophages, which further inhibited RANKL-induced osteoclast differentiation without cytotoxicity in bone marrow macrophage cells. Full article

The control of crystal form in chiral active pharmaceutical ingredients (APIs) is a critical challenge in pharmaceutical development, as differences in solid-state structure can significantly influence physical properties and manufacturing performance. Troglitazone, a molecule with two chiral centers, exists as four stereoisomers (RR, SS, RS, SR) that crystallize as two enantiomeric pairs: RR/SS and RS/SR. This study aims to elucidate the relationship between solution-state molecular interactions and crystallization behavior of these diastereomeric pairs. Antisolvent crystallization experiments were conducted for both mixed solutions containing all four isomers and solutions of individual pairs. Crystallization kinetics were monitored by HPLC, and the resulting solids were characterized by PXRD, DSC, TG, and microscopic observation. Nucleation induction times were determined over a range of supersaturation levels. To probe intermolecular interactions in solution, NOESY and targeted NOE NMR experiments were performed, and the results were compared with crystallographic data. The RS/SR crystals(H-form) consistently exhibited shorter induction times and faster crystallization rates than the RR/SS crystals (L-form), even under conditions where RR/SS solutions were more supersaturated. In mixed solutions, H-form crystallized preferentially, with L-form either remaining in solution or being incorporated into H-form crystals as a solid solution. NOESY and NOE analyses revealed intermolecular proximities between protons that are distant in the molecular structure, indicating the presence of ordered aggregates in solution. These aggregates were more structurally compatible with the H-form than with the L-form crystal lattice, as supported by crystallographic distance analysis. The results demonstrate that differences in nucleation kinetics between troglitazone diastereomers are closely linked to solution-state molecular arrangements. Understanding these relationships provides a molecular-level basis for the rational design of selective crystallization processes for chiral APIs. Full article

Tetrahydroprotoberberine alkaloids (THPBs) are bioactive natural products bearing stereogenic centers that frequently exhibit enantiomer-specific pharmacological effects. Xylopinine (XPN), a representative THPB, shows cytotoxic, antimicrobial, and antimalarial activity in vitro, and displays pronounced stereoselectivity in vivo, with the naturally occurring (S)-enantiomer emphasizing the need for reliable enantioselective analysis. In this study, we present the synthesis of racemic XPN from norlaudanosine, and its first comprehensive cyclodextrin-assisted capillary electrophoresis screening dedicated to the enantioseparation of XPN. Sulfated- and sulfobutyl-ether-β-cyclodextrin (S-β-CyD, SBE-β-CyD) provided efficient resolution (R_s > 3), while heptakis-(6-deoxy-6-(2-carboxyethyl)thio)-β-CyD (subetadex, SBX) yielded outstanding separation (R_s > 9). The enantiomer migration order was consistently R,S, except when using SBE-β-CyD, which showed the inverse sequence. Chiral HPLC using a Chiralpak AD column in polar organic mode with methanol modified with 0.1% diethylamine as mobile phase enabled the semi-preparative isolation of XPN enantiomers, with the (S)-enantiomer exceeding 95% purity. The absolute configuration was confirmed by circular dichroism spectroscopy. ¹H NMR titration and 2D rotating-frame nuclear Overhauser effect correlation spectroscopy (ROESY) consistently revealed multi-site recognition of XPN by SBX, supporting the inclusion of both aromatic rings (A and D). Full article

The mechanism of separating the small chiral drug molecules on large soft polymers is essential in pharmaceutical science. As a case study, the differentiation mechanism of ibuprofen, (R,S)-2-(4-isobutylphenyl)propanoic acid, with cellulose tris(4-methylbenzoate) (CMB) as the chiral stationary phase (CSP) was investigated by combining the molecular docking simulation and multi-level layered terminal-to-center elongation (ML-T2C-ELG) method. Our results demonstrated that, based on the optimized geometry using the ML-T2C-ELG method, the complexation energy of S-ibuprofen with CMB obtained at B3LYP-D3(BJ)/6-311G(d) level is more negative than that of R-ibuprofen, which is caused by the greater hydrogen bonding and π-π stacking interactions between CMB and S-ibuprofen. The results are in line with the experimental observations of high-performance liquid chromatography (HPLC) that the retention time of S-ibuprofen on CMB is longer than that of R-ibuprofen. Moreover, the ML-T2C-ELG method was found to be valuable for optimizing the geometries of such flexible and large systems, which allows for a more accurate description of interactions between soft polymers and small molecules when coupled with the docking simulation. It is anticipated that this study can provide beneficial insights for future optical resolution mechanisms of other chiral drugs. Full article

Inspired by naturally occurring bis-isochromans such as penicisteckins, we envisaged the first synthesis of biaryl-type bis-1-arylisochromans containing a stereogenic ortho-trisubstituted biaryl axis. We achieved the stereoselective synthesis of 5,5′-linked heterodimeric bis-isochromans containing both central and axial chirality elements by performing diastereoselective Suzuki–Miyaura biaryl coupling reactions on two optically active 1-arylpropan-2-ol derivatives, followed by two oxa-Pictet–Spengler cyclizations with aryl aldehydes or methoxymethyl chloride. We studied the diastereoselectivity of the cyclization step, separated the stereoisomeric products with chiral preparative HPLC and determined the absolute configuration through a combination of vibrational circular dichroism (VCD), NMR and single-crystal X-ray diffraction analysis. We demonstrated that different aryl groups could be introduced into the two isochroman subunits, since the dimethoxyaryl subunit reacted faster, enabling the two oxa-Pictet–Spengler cyclizations to be performed separately with different aryl aldehydes. We also explored the acid-catalyzed isomerization and oxidation to axially chiral ortho-quinones in order to produce stereoisomeric and oxidized analogs, respectively. We identified the antibacterial activity of our target bis-isochromans against Bacillus subtilis and Enterococcus faecalis with minimum inhibitory concentrations down to 4.0 and 0.5 μg/mL, respectively, which depend on the stereochemistry and substitution pattern of the bis-isochroman skeleton. Full article

The separation of three proton pump inhibitors (omeprazole, lansoprazole, and rabeprazole) as exemplified molecules containing chiral sulfoxide groups was investigated in polar organic liquid chromatographic mode on seven different polysaccharide stationary phases (Chiralcel OD and OJ; Chiralpak AD, AS, and IA; Lux Cellulose-2 and -4). Different alcohols, such as methanol, ethanol, 1-propanol, 2-propanol, and their combinations, were used as eluents. After method optimization, semi-preparative enantioseparation was successfully applied for the three proton pump inhibitors to collect the individual enantiomers. A detailed investigation was conducted into elution order reversal, thermodynamic parameters, the effect of eluent mixtures, and the hysteresis of retention time and selectivity. Using Chiralpak AS, containing the amylose tris[(S)-α-methylbenzylcarbamate] chiral selector, the separation of the investigated enantiomers was achieved in all four neat eluents, with methanol providing the best results. In many cases, a reversal of the enantiomer elution order was observed. In addition to chiral-selector-dependent reversal, eluent-dependent reversal was also observed. Notably, even replacing methanol with ethanol altered the enantiomer elution order. Both enthalpy- and entropy-controlled enantioseparation were also observed in several cases; however, temperature-dependent elution order reversal was not. The hysteresis of retention and selectivity was further investigated on amylose-type columns in methanol–2-propanol and methanol–ethanol eluent mixtures. The phenomenon was observed on all amylose columns regardless of the eluent mixtures employed. Hystereticity ratios were calculated and used to compare the hysteresis behaviors of different systems. Multivariate statistical analysis revealed that Chiralpak AS exhibited the most distinct enantioselective behavior among the tested columns, likely due to the absence of a direct connection between the carbamate moiety and the aromatic substituent. The present study aided in understanding the mechanisms leading to enantiomer recognition, which is crucial for developing new chiral stationary phases and chiral HPLC method development in general. Full article

The growing need for developing safer and more effective methods for obtaining enantiomers of chiral compounds, particularly those with pharmacological activity, highlights the potential of biocatalysis as an appropriate pharmaceutical research direction. However, low catalytic activity and stability of free enzymes are often among the substantial limitations to the wide application of biocatalysis. Therefore, to overcome these obstacles, new technological procedures are being designed. In this study, we present optimized protocols for the immobilization of Candida antarctica lipase B (CALB) on an octyl- agarose support, ensuring high enantioselectivity in an organic reaction medium. The immobilization procedures (with drying step), including buffers with different pH values and concentrations, as well as the study of the influence of temperature and immobilization time, were presented. It was found that the optimal conditions were provided by citrate buffer with a pH of 4 and a concentration of 300 mM. The immobilized CALB on the octyl-agarose support exhibited high catalytic activity in the kinetic resolution of (R,S)-1-phenylethanol via enantioselective transesterification with isopropenyl acetate in 1,2-dichloropropane (DCP), as a model reaction for lipase activity monitoring on an analytical scale. HPLC analysis demonstrated that the (R)-1-phenylethyl acetate was obtained in an enantiomeric excess of ee_p > 99% at a conversion of approximately 40%, and the enantiomeric ratio was E > 200. Thermal and storage stability studies performed on the immobilized CALB octyl-agarose support confirmed its excellent stability. After 7 days of thermal stability testing at 65 °C in a climatic chamber, the (R)-1-phenylethyl acetate was characterized by enantiomeric excess of ee_p > 99% at a conversion of around 40% (similar values of catalytic parameters to those achieved using a non-stored lipase). The documented high catalytic activity and stability of the developed CALB-octyl-agarose support allow us to consider it as a useful tool for enantioselective transesterification in organic medium. Full article

Lactic acid (LA) is a natural organic acid that can be used in a wide variety of industries. Recently, the production of lactic acid by fermentation protocols has gained relevance. However, these biotechnological processes often encounter challenges in the production of enantiopure D- or L-lactic acid. Thus, the measurement and control of the enantiopurity of lactic acid and its derivatives is a crucial step in these productions, especially when monomers have to be used to synthesize polymers, such as polylactic acid (PLA). In the present work, we propose a measurement of the enantiopurity of lactic acid mixtures with HPLC-DAD by using direct-phase conditions, which are mild, and a large set of different employable chiral columns. To this end, we report the synthesis of two new LA derivatives (2-nitrobenzyl 2-hydroxypropanoate and 2,4-dinitrobenzyl 2-hydroxypropanoate) and benzyl 2-hydroxypropanoate, with a selective and non-racemizing chemical functionalization. Then, three commercially available HPLC direct-phase chiral columns are tested to achieve a method for measuring the enantiomeric purity of lactic acid derivatives. The 2-nitrobenzyl lactate was chosen as the best lactic acid derivative and the Chiralpak IA column was chosen as the most effective chiral column to achieve a new and efficient protocol (Rs = 3.57 and α = 1.13) for the measurement of the enantiopurity of lactic acid. Full article

Background/Objective: Avapritinib is an orally bioavailable tyrosine kinase inhibitor and was approved by the FDA in 2020 for gastrointestinal stromal tumor treatments. Although avapritinib is known to be chiral, its stereochemistry was initially established randomly. This study aims to develop a definitive method for determining avapritinib’s absolute configuration and propose a universal methodology for stereochemical characterization of flexible chiral drugs. Methods: The absolute configuration of avapritinib was determined through an integrated approach combining chiral resolution, chiroptical spectroscopy and synthetic validation. Enantiomeric separation was achieved via chiral liquid chromatography, followed by comprehensive chiroptical characterization including electronic circular dichroism (ECD), specific optical rotation and optical rotatory dispersion. Conformational analysis and density functional theory (DFT) calculations correlated experimental spectra with theoretical predictions, facilitating definitive configurational assignment. The stereochemical determination were further verified through ECD derivatization and chemical synthesis. Finally, the enantiomers’ kinase inhibition profiles against c-KIT D816V were quantitatively assessed. Results: Two enantiomers of avapritinib were resolved via chiral HPLC and a Chiralpak IG column. Through combined experimental ECD spectra and time-dependent DFT calculations employing the core extraction method, the levo-isomer was unambiguously determined as S configuration. This stereochemical assignment was confirmed by p-cyanobenzaldehyde derivatization and de novo synthesis. Biological evaluation revealed (S)-(−)-avapritinib exhibited superior c-KIT D816V inhibitory activity compared to its (R)-(+)-counterpart, a finding corroborated by molecular docking studies elucidating their differential target interactions. Conclusions: This study advances avapritinib stereochemical understanding and establishes a definitive protocol for its absolute configuration assignment, serving as a paradigm for flexible chiral drug characterization. Full article