Search Results (17,010)

Dental implant components are typically fabricated using subtractive manufacturing, often involving metal materials that can be costly, inefficient, and time-consuming. This study explores the use of additive manufacturing (AM) with zirconia for dental implant overdenture bars, focusing on mechanical performance, stress distribution, and fit. Solid and lattice-structured bars were designed in Fusion 360 and produced using LithaCon 210 3Y-TZP zirconia (Lithoz GmbH, Vienna, Austria) on a CeraFab 8500 printer. Post-processing included cleaning, debinding, and sintering. A 3D-printed denture was also fabricated to evaluate fit. Thermography and optical imaging were used to assess adaptation. Custom fixtures were developed for flexural testing, and fracture loads were recorded to calculate stress distribution using finite element analysis (ANSYS R2025). The FEA model assumed isotropic, homogeneous, linear-elastic material behavior. Bars were torqued to 15 Ncm on implant analogs. The average fracture loads were 1.2240 kN (solid, n = 12) and 1.1132 kN (lattice, n = 5), with corresponding stress values of 147 MPa and 143 MPa, respectively. No statistically significant difference was observed (p = 0.578; α = 0.05). The fracture occurred near high-stress regions at fixture support points. All bars demonstrated a clinically acceptable fit on the model; however, further validation and clinical evaluation are still needed. Additively manufactured zirconia bars, including lattice structures, show promise as alternatives to conventional superstructures, potentially offering reduced material use and faster production without compromising mechanical performance. Full article

Introduction: Cutaneous squamous cell carcinoma (cSCC) is the second most common skin cancer entity in Germany, following basal cell carcinoma. Its incidence has increased fourfold over the past three decades. Early diagnosis and treatment are essential for achieving favorable outcomes. Our study aims to identify prognostic factors based on real-world data to improve follow-up protocols and raise clinical vigilance. Methods: We conducted a retrospective, monocenter analysis with a total of 124 patients with at least one cSCC thicker than 3 mm, treated at the Department of Dermatology, University Medical Center Mainz, between 2010 and 2020. Tumor-specific criteria were correlated with patient-specific data, such as gender, age, immunosuppression, UV exposure and mortality. Results: A higher incidence of cSCC was found on UV-exposed skin (91.1%); however, tumors on non-UV-exposed skin were on average thicker (6.55 mm vs. 9.25 mm, p = 0.011) and associated with higher metastasis rates (10.6% vs. 63.3%, p < 0.001). Immunosuppression was strongly associated with a younger age at diagnosis (74 years vs. 81 years), a higher metastasis rate (29% vs. 10.8%, p = 0.021) and a worse 5Y-OS-rate (36.1% vs. 97.8%, p = 0.04). SLNB was performed in eight patients, with one positive SLN identified (12.5%). Local recurrence was observed in 18.1% (n = 21) of patients who did not experience SLNB, whereas no local recurrences (0%) were reported in patients with SLNB (p = 0.349). Discussion: Tumors on non-UV-exposed areas were thicker and more often metastatic, suggesting delayed detection or more aggressive tumor subtypes. Immunosuppression was associated with worse outcomes, underscoring the need for intensified follow-up. SLNB was rarely performed, and larger studies are needed to assess its role. Full article

This work aims to perform a detailed mineralogical, crystal-chemical, and geochemical characterization of bentonites from the Benavila outcrop, the largest known deposit of bentonites in continental Portugal. Bulk samples and different size fractions were characterized through X-Ray Diffraction (XRD). Structural formulae of the smectites were fitted from point analyses acquired by analytical electron microscopy (AEM) with transmission electron microscopy (TEM). Smectites are the major component with variable amounts of calcite and minor amounts of quartz, feldspar, illite, and chlorite. Occasionally, amphiboles and dolomite have also been identified. The high content of carbonates in different parts of the sampling area is related to the circulation of carbonate-rich fluids. The smectites present high-layer charge, are intermediate terms of the montmorillonite–beidellite series, and also show an intermediate cisvacant–transvacant configuration. Major and trace elements concentrations were determined by ICP-MS. The geochemical analysis of the samples indicates an enrichment in SiO₂ and Al₂O₃ and a depletion of the more clayey materials in REE, HFSE, and Y, among others. The calculation of the PIA and CIA alteration indices, along with other parameters observed, shows the possible alteration pathways of the Benavila deposit. Research to evaluate the ability of these bentonites to be used as engineering barrier systems (EBS) and sealing materials for radioactive waste repositories is ongoing. Full article

Chilean Schinus molle has been used in traditional medicine for effects such as antibacterial, antifungal, anti-inflammatory, analgesic, antiviral, antitumoral, antioxidant, antispasmodic, astringent, antipyretic, cicatrizant, cytotoxic, diuretic, among others. In this study, we evaluated the pharmacological potential of Schinus molle seed essential oil extract (SM_EO) through in vitro and in silico approaches. In vitro, the antioxidant potential was analyzed, and antitumor activity was evaluated in non-tumor and human epithelial tumor cell lines. Caenorhabditis elegans was used as a model for evaluating toxicity, and the chemical composition of the SM_EO was analyzed using gas chromatography–mass spectrometry. The oil contained four major monoterpenes: α-phellandrene (34%), β-myrcene (23%), limonene (13%), and β-phellandrene (7%). Based on quantum mechanical calculations, the reactivity of the molecules present in the SM_EO was estimated. The results indicated that α- phellandrene, β-phellandrene, and β-myrcene showed the highest nucleophilic activity. In addition, the compounds following these as candidates for antioxidant and antiproliferative activities were α-phellandrene, β-phellandrene, ρ-cymene, sabinene, caryophyllene, l-limonene, and α-pinene, highlighting β-myrcene. Based on ADME-Tox properties, it is feasible to use these compounds as new drug candidates. Moreover, the antibacterial activity MIC value obtained for B. cereus was equivalent to 2 μg/mL, and for Y. enterocolitica, S. enteritidis, and S. typhimurium, the MIC value was 32.5 μg/μL. SM_EO could selectively inhibit the proliferation of human epithelial mammary tumor MCF7 cells treated with SM_EOs at 64 and 16 ug/mL—a significant increase in BCL-2 in a dose-dependent manner—and showed low toxicity against Caenorhabditis elegans (from 10 to 0.078 mg·mL⁻¹). These findings suggest that SM_EO may be a potential source of bioactive compounds, encouraging further investigation for applications in veterinary medicine, cosmetics, and sanitation. Full article

Introduction: Here we consider the collision of a genetic factor and an essential instigator in Alzheimer’s neuropathogenesis: (i) the Alzheimer’s gene (APOEε4), which downregulates lysosomal autophagy and induces synthesis of (ii) the instigator, interleukin-1β (IL-1β), which drives synthesis of βAPP for Aβ plaques and of MAPKp38 for phosphorylation of tau for formation of neurofibrillary tangles (NFTs), the two cardinal features of AD. Methods: RT-PCR, immunoblotting and immunohistochemistry techniques were used to assess the levels of IL-1β and its signaling cascade in ADε4,4, ε3,3, and age-matched controls (AMC3,3) in hippocampal regions of the brain. Results: IL-1β and its downstream signaling proteins TLR-2, MyD88, NFκB, COX-1, and COX-2 were greater in tissues from ADε4,4 than ADε3,3 or AMC3,3. Cathepsin B, D, and L levels, which play a pivotal role and are necessary for lysosomal autophagy, were lower in ADε4,4 than in ADε3,3 or AMC ε3,3. IL-1β and its downstream signaling cascade TLR-2, MyD88, NFκB, COX-1, and COX-2 expression levels were high in SH-SY5Y and T98G cells transfected with APOεE4. Conclusions: APOEε4 causes Alzheimer’s by downregulating autophagy, thus inducing IL-1β for Aβ plaque and neurofibrillary tangle formation. Full article

One of the important traits of many plant growth-promoting rhizobacteria (PGPR) is the biocontrol of phytopathogens. Some PGPR metabolize phytohormone abscisic acid (ABA); however, the role of this trait in plant–microbe interactions is scarcely understood. Phytopathogenic fungi produce ABA and use this property as a negative regulator of plant resistance. Therefore, interactions between ABA-producing necrotrophic phytopathogen Botrytis sp. BA3 with ABA-metabolizing rhizobacterium Rhodococcus sp. P1Y were studied in a batch culture and in gnotobiotic hydroponics with sunflower seedlings. Rhizobacterium P1Y possessed no antifungal activity against BA3 and metabolized ABA, which was synthesized by BA3 in vitro and in associations with sunflower plants infected with this fungus. Inoculation with BA3 and the application of exogenous ABA increased the root ABA concentration and inhibited root and shoot growth, suggesting the involvement of this phytohormone in the pathogenesis process. Strain P1Y eliminated negative effects of BA3 and exogenous ABA on root ABA concentration and plant growth. Both microorganisms significantly modulated the hormonal status of plants, affecting indole-3-acetic, salicylic, jasmonic and gibberellic acids, as well as cytokinins concentrations in sunflower roots and/or shoots. The hormonal effects were complex and could be due to the production of phytohormones by microorganisms, changes in ABA concentrations and multiple levels of crosstalk in hormone networks regulating plant defense. The results suggest the counteraction of rhizobacteria to ABA-producing phytopathogenic fungi through the metabolism of fungal ABA. This expands our understanding of the mechanisms related to the biocontrol of phytopathogens by PGPR. Full article

Objectives: The primary objective was to investigate and compare the effects of three paired-pulse repetitive trans-spinal magnetic stimulation (PP-rTSMS) protocols on balance control and corticospinal network function. Methods: PP-rTSMS (800 pulses, frequency 100 Hz, intensity 70% of the resting motor threshold) was applied over the eighth thoracic vertebra (Th8) in twenty-seven young healthy individuals. Each proband received three verum sessions (using a verum coil with handle oriented (i) cranially, (ii) caudally, and (iii) laterally) and (iv) one sham session (using a sham coil) in a randomised order. Balance ability (Y Balance Test) and corticospinal network functions (motor evoked potentials (MEPs), cortical silent periods (SCPs)) were tested immediately (i) prior to and (ii) after each interventional session. Results: Each verum session induced a significant improvement in balance ability (cranially (F_1,26 = 8.009; p = 0.009; η² = 0.236), caudally (F_1,26 = 4.846; p = 0.037; η² = 0.157), and laterally (F_1,26 = 23,804; p ≤ 0.001; η² = 0.478) oriented grip) as compared to the sham session. In addition, the laterally oriented coil grip was associated with significantly greater balance benefits than both the cranial (F_1,26 = 10.173; p = 0.004; η² = 0.281) and caudal (F_1,26 = 14.058; p ≤ 0.001; η² = 0.351) grip orientations. No significant intervention-induced effects were detected on corticospinal network functions. Conclusions: Our data show that PP-rTSMS effectively supports balance control and that coil orientation significantly influences these effects. Further studies should test variations of this promising approach on healthy and disabled cohorts. Full article

To reveal the influence mechanisms of seasonal climatic factors (wind speed, wind direction, temperature) and leakage direction on hydrogen dispersion and explosion behavior from single-source leaks at typical risk locations (hydrogen storage tanks, compressors, dispensers) in hydrogen refueling stations (HRSs), this work established a full-scale 1:1 three-dimensional numerical model using the FLACS v22.2 software based on the actual layout of an HRS in Xichang, Sichuan Province. Through systematic simulations of 72 leakage scenarios (3 equipment types × 4 seasons × 6 leakage directions), the coupled effects of climatic conditions, equipment layout, and leakage direction on hydrogen dispersion patterns and explosion risks were quantitatively analyzed. The key findings indicate the following: (1) Downward leaks (−Z direction) from storage tanks tend to form large-area ground-hugging hydrogen clouds, representing the highest explosion risk (overpressure peak: 0.25 barg; flame temperature: >2500 K). Leakage from compressors (±X/−Z directions) readily affects adjacent equipment. Dispenser leaks pose relatively lower risks, but specific directions (−Y direction) coupled with wind fields may drive significant hydrogen dispersion toward station buildings. (2) Southeast/south winds during spring/summer promote outward migration of hydrogen clouds, reducing overall station risk but causing localized accumulation near storage tanks. Conversely, north/northwest winds in autumn/winter intensify hydrogen concentrations in compressor and station building areas. (3) An empirical formula integrating climatic parameters, leakage conditions, and spatial coordinates was proposed to predict hydrogen concentration (error < 20%). This model provides theoretical and data support for optimizing sensor placement, dynamically adjusting ventilation strategies, and enhancing safety design in HRSs. Full article

Petrological knowledge on weathering processes controlling the mobility of chemical elements is still limited in the dry tropical zone of Cameroon. This study aims to investigate the mobility of major and trace elements during rhyolite weathering and soil formation in Mobono by understanding the mineralogical and elemental vertical variation. The studied soil was classified as Cambisols containing mainly quartz, K-feldspar, plagioclase, smectite, kaolinite, illite, calcite, lepidocrocite, goethite, sepiolite, and interstratified clay minerals. pH values ranging between 6.11 and 8.77 indicated that hydrolysis, superimposed on oxidation and carbonation, is the main process responsible for the formation of secondary minerals, leading to the formation of iron oxides and calcite. The bedrock was mainly constituted of SiO₂, Al₂O₃, Na₂O, Fe₂O₃, Ba, Zr, Sr, Y, Ga, and Rb. Ce and Eu anomalies, and chondrite-normalized La/Yb ratios were 0.98, 0.67, and 2.86, respectively. SiO₂, Al₂O₃, Fe₂O₃, Na₂O, and K₂O were major elements in soil horizons. Trace elements revealed high levels of Ba (385 to 1320 mg kg⁻¹), Zr (158 to 429 mg kg⁻¹), Zn (61 to 151 mg kg⁻¹), Sr (62 to 243 mg kg⁻¹), Y (55 to 81 mg kg⁻¹), Rb (1102 to 58 mg kg⁻¹), and Ga (17.70 to 35 mg kg⁻¹). LREEs were more abundant than HREEs, with LREE/HREE ratio ranging between 2.60 and 6.24. Ce and Eu anomalies ranged from 1.08 to 1.21 and 0.58 to 1.24 respectively. The rhyolite-normalized La/Yb ratios varied between 0.56 and 0.96. Mass balance revealed the depletion of Si, Ca, Na, Mn, Sr, Ta, W, U, La, Ce, Pr, Nd, Sm, Gd and Lu, and the accumulation of Al, Fe, K, Mg, P, Sc, V, Co, Ni, Cu, Zn, Ga, Ge, Rb, Y, Zr, Nb, Cs, Ba, Hf, Pb, Th, Eu, Tb, Dy, Ho, Er, Tm and Yb during weathering along the soil profile. Full article

In patients with coronary artery disease (CAD) undergoing percutaneous coronary intervention (PCI), antiplatelet therapy is the cornerstone of treatment for secondary prevention. Although dual antiplatelet therapy (DAPT) consisting of aspirin and a P2Y₁₂ inhibitor is the current standard of care, being, respectively, recommended for 6 and 12 months in patients with chronic and acute coronary syndrome without a need for oral anticoagulation, the continuous improvement in PCI technology and pharmacology have significantly reduced the need for long-term DAPT. Mounting evidence supports the administration of P2Y₁₂ inhibitor monotherapy, particularly ticagrelor, after a short period of DAPT following PCI as a strategy to reduce bleeding without a trade-off in ischemic events compared to standard DAPT. In addition, there is a growing literature supporting P2Y₁₂ inhibitor monotherapy also for long-term secondary prevention of ischemic events. However, the data to this extent are not as robust as compared to the first-year post-PCI period, with aspirin monotherapy still remaining the mainstay of treatment for most patients. This review aims to summarize the rationale for long-term antiplatelet therapy, the pharmacology of current antiplatelet drugs tested for long-term administration as monotherapy, and current evidence on the available comparisons between different long-term antiplatelet monotherapies in patients with CAD. Full article

The present study aimed to standardize germinated oat extracts (GOEs) by profiling avenanthramides (AVNs) and phenolic acids and evaluate their neuroprotective effects against Aβ_1-42-induced cytotoxicity in human neuroblastoma (SH-SY5Y) cells. GOEs were standardized to contain 1652.56 ± 3.37 µg/g dry weight (dw) of total AVNs, including 468.52 ± 17.69 µg/g AVN A, 390.33 ± 10.26 µg/g AVN B, and 641.22 ± 13.89 µg/g AVN C, along with 490.03 ± 7.83 µg/g dw of ferulic acid, using a validated analytical method. Treatment with AVN C and GOEs significantly inhibited Aβ_1-42-induced cytotoxicity (p < 0.05). Furthermore, both AVNs and GOEs markedly reduced Aβ_1-42-induced reactive oxygen species (ROS) generation in SH-SY5Y cells, showing significant scavenging activity at concentrations of 25 μg/mL (AVNs) and 50 μg/mL (GOEs) (p < 0.05). RT-PCR analysis revealed that AVNs and GOEs effectively downregulated the expression of inflammation- and apoptosis-related genes triggered by Aβ_1-42 exposure. These findings suggest that GOEs rich in AVNs may serve as a potential functional ingredient for enhancing memory function through the inhibition of neuroinflammation and oxidative stress. Full article

We study in detail the critical points of Bohmian flow, both in the inertial frame of reference (Y-points) and in the frames centered at the moving nodal points of the guiding wavefunction (X-points), and analyze their role in the onset of chaos in a system of two entangled qubits. We find the distances between these critical points and a moving Bohmian particle at varying levels of entanglement, with particular emphasis on the times at which chaos arises. Then, we find why some trajectories are ordered, without any chaos. Finally, we examine numerically how the Lyapunov Characteristic Number ($LCN$) depends on the degree of quantum entanglement. Our results indicate that increasing entanglement reduces the convergence time of the finite-time $LCN$ of the chaotic trajectories toward its final positive value. Full article

High-precision 6D pose estimation for pick-and-place operations remains a critical problem for industrial robot arms in manufacturing. This study introduces an analytics-based solution for 6D pose estimation designed for a real-world industrial application: it enables the Staubli TX2-60L (manufactured by Stäubli International AG, Horgen, Switzerland) robot arm to pick up metal plates from various locations and place them into a precisely defined slot on a brake pad production line. The system uses a fixed eye-to-hand Intel RealSense D435 RGB-D camera (manufactured by Intel Corporation, Santa Clara, California, USA) to capture color and depth data. A robust software infrastructure developed in LabVIEW (ver.2019) integrated with the NI Vision (ver.2019) library processes the images through a series of steps, including particle filtering, equalization, and pattern matching, to determine the X-Y positions and Z-axis rotation of the object. The Z-position of the object is calculated from the camera’s intensity data, while the remaining X-Y rotation angles are determined using the angle-of-inclination analytics method. It is experimentally verified that the proposed analytical solution outperforms the hybrid-based method (YOLO-v8 combined with PnP/RANSAC algorithms). Experimental results across four distinct picking scenarios demonstrate the proposed solution’s superior accuracy, with position errors under 2 mm, orientation errors below 1°, and a perfect success rate in pick-and-place tasks. Full article

The artichoke (Cynara cardunculus L. subsp. scolymus) is an endemic perennial plant of the Mediterranean area commonly consumed as food. It is known since ancient times for its beneficial properties for human health, among which its antioxidant activity due to polyphenolics stands out. In the frame of our ongoing studies aiming to highlight the biodiversity and the chemodiversity of natural resources, we investigated the phenolic and saponin content of the cultivar “Carciofo di Procida” collected at Procida, an island of the Gulf of Naples (Italy). Along with the edible part of the immature flower, we included in our analyses the stem and the external bracts, generally discarded for food consuming or industrial preparations. The LCMS quali-quantitative profiling of polyphenols (including anthocyanins) and cynarasaponins of this cultivar is reported for the first time. In addition to antioxidant properties, we observed a significant cytotoxic activity due to extracts from external bracts against human neuroblastoma SH-SY5Y cell lines with 43% of cell viability, after 24 h from the treatment (50 μg/mL), and less potent but appreciable effects also against human colorectal adenocarcinoma CaCo-2 cells. This suggests that the different metabolite composition may be responsible for the bioactivity of extracts obtained from specific parts of artichoke and foresees a possible exploitation of the discarded material as a source of beneficial compounds. Full article

Disease resistance is one of the most important target traits for sugarcane genetic improvement. Sugarcane brown stripe (SBS) caused by Helminthosporium stenospilum is one of the most destructive foliar diseases, which not only reduces harvest cane yield but also sugar content. This study aimed to identify quantitative trait loci (QTL) and candidate genes associated with SBS resistance. Here, the phenotypic investigation in six field habitats showed a continuous normal distribution, revealing that the SBS resistance trait is a quantitative trait. Two high-density linkage maps based on the single-dose markers calling from the Axiom Sugarcane100K SNP chip were constructed for the dominant sugarcane cultivars YT93-159 (SBS-resistant) and ROC22 (SBS-susceptible) with a density of 2.53 cM and 2.54 cM per SNP marker, and mapped on 87 linkage groups (LGs) and 80 LGs covering 3069.45 cM and 1490.34 cM of genetic distance, respectively. A total of 32 QTL associated with SBS resistance were detected by QTL mapping, which explained 3.73–11.64% of the phenotypic variation, and the total phenotypic variance explained (PVE) in YT93-159 and ROC22 was 107.44% and 79.09%, respectively. Among these QTL, four repeatedly detected QTL (qSBS-Y38-1, qSBS-Y38-2, qSBS-R8, and qSBS-R46) were considered stable QTL. Meanwhile, two major QTL, qSBS-Y38 and qSBS-R46, could account for 11.47% and 11.64% of the PVE, respectively. Twenty-five disease resistance candidate genes were screened by searching these four stable QTL regions in their corresponding intervals, of which Soffic.01G0010840-3C (PR3) and Soffic.09G0017520-1P (DND2) were significantly up-regulated in YT93-159 by qRT-PCR, while Soffic.01G0040620-1P (EDR2) was significantly up-regulated in ROC22. These results will provide valuable insights for future studies on sugarcane breeding in combating this disease. Full article