Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
4.9
2.6
Journals
Metals
Announcements
share announcement

Announcements

23 May 2024
Metals | Top 10 Highly Cited Papers in 2022 in the Section “Metal Failure Analysis”


The “Metal Failure Analysis” Section of Metals (ISSN: 2075-4701) covers a broad field of failure processes. The main issue in these processes is related to the correlation of failure with the structure and microstructure of metals and metal welds with their specific properties. Three main issues are related to metal failure analysis:

  • The first issue involves the prediction of failure based on the structural and microstructural characterization of metals, alloys, and their welds;
  • The second issue concerns the rehabilitation of metals, alloys, and their welds;
  • The third issue is the industrialization of the failure monitoring and metal rehabilitation process.

As all articles published in our journal are in an open access format, you have free and unlimited access to the full texts. We welcome you to read the top ten selected papers published in 2022 listed below:

“Analysis of Fatigue Strength of L-PBF AlSi10Mg with Different Surface Post-Processes: Effect of Residual Stresses”
by Francesco Sausto, Christian Tezzele and Stefano Beretta
Metals 2022, 12(6), 898; https://doi.org/10.3390/met12060898
Available online: https://www.mdpi.com/2075-4701/12/6/898

“Influence of Deposition Strategies on Residual Stress in Wire + Arc Additive Manufactured Titanium Ti-6Al-4V”
by Bilal Ahmad, Xiang Zhang, Hua Guo, Michael E. Fitzpatrick, Leonor MacHado Santos Carvalho Neto and Stewart Williams
Metals 2022, 12(2), 253; https://doi.org/10.3390/met12020253
Available online: https://www.mdpi.com/2075-4701/12/2/253

“Selection of Higher Order Lamb Wave Mode for Assessment of Pipeline Corrosion”
by Donatas Cirtautas, Vykintas Samaitis, Liudas Mažeika, Renaldas Raišutis and Egidijus Žukauskas
Metals 2022, 12(3), 503; https://doi.org/10.3390/met12030503
Available online: https://www.mdpi.com/2075-4701/12/3/503

“Using Plane Strain Compression Test to Evaluate the Mechanical Behavior of Magnesium Processed by HPT”
by Amanda P. Carvalho, Leonardo M. Reis, Ravel P. R. P. Pinheiro, Pedro Henrique R. Pereira, Terence G. Langdon and Roberto B. Figueiredo
Metals 2022, 12(1), 125; https://doi.org/10.3390/met12010125
Available online: https://www.mdpi.com/2075-4701/12/1/125

“Low Cycle Fatigue Performance of Additively Processed and Heat-Treated Ti-6Al-7Nb Alloy for Biomedical Applications”
by Maxwell Hein, David Kokalj, Nelson Filipe Lopes Dias, Dominic Stangier, Hilke Oltmanns, Sudipta Pramanik, Manfred Kietzmann, Kay-Peter Hoyer, Jessica Meißner, Wolfgang Tillmann et al.
Metals 2022, 12(1), 122; https://doi.org/10.3390/met12010122
Available online: https://www.mdpi.com/2075-4701/12/1/122

“Research of Resistance of Selected Materials to Abrasive Wear to Increase the Ploughshare Lifetime”
by Monika Vargova, Miroslava Tavodova, Katarina Monkova and Miroslav Dzupon
Metals 2022, 12(6), 940; https://doi.org/10.3390/met12060940
Available online: https://www.mdpi.com/2075-4701/12/6/940

“Machinable Leaded and Eco-Friendly Brass Alloys for High Performance Manufacturing Processes: A Critical Review”
by Paul Stavroulakis, Anagnostis I. Toulfatzis, George A. Pantazopoulos and Alkiviadis S. Paipetis
Metals 2022, 12(2), 246; https://doi.org/10.3390/met12020246
Available online: https://www.mdpi.com/2075-4701/12/2/246

“Effect of Mechanical Properties of Rail and Wheel on Wear and Rolling Contact Fatigue”
by Jung-Won Seo, Hyun-Moo Hur and Seok-Jin Kwon
Metals 2022, 12(4), 630; https://doi.org/10.3390/met12040630
Available online: https://www.mdpi.com/2075-4701/12/4/630

“Long-Term in Vitro Corrosion of Biodegradable WE43 Magnesium Alloy in DMEM”
by Julia Nachtsheim, Jaka Burja, Songyun Ma and Bernd Markert
Metals 2022, 12(12), 2062; https://doi.org/10.3390/met12122062
Available online: https://www.mdpi.com/2075-4701/12/12/2062

“Comparison of SP, SMAT, SMRT, LSP, and UNSM Based on Treatment Effects on the Fatigue Properties of Metals in the HCF and VHCF Regimes”
by Rui Chen, Hongqian Xue and Bin Li
Metals 2022, 12(4), 642; https://doi.org/10.3390/met12040642
Available online: https://www.mdpi.com/2075-4701/12/4/642

More News...
Back to TopTop