Skip to Content
MetrologyMetrology
  • Article
  • Open Access

18 November 2026

33 Pages

Traceable Metrological Digital Twin for Robot-Based 3D Inspection: Calibration, Uncertainty Propagation, and Cross-Validation

,
,
,
,
,
and
1
TEKNIKER, Calle Iñaki Goenaga, 5, 20600 Eibar, Spain
2
IDEKO S.Coop. Polígono Industrial, Arriaga Kalea, 20870 Elgoibar, Spain
3
National Metrology Institute VTT MIKES, Tekniikantie 1, 02150 Espoo, Finland
4
Department of Mechanical Engineering, Bilbao School of Engineering, Euskal Herriko Unibertsitatea (EHU), Plaza Ingeniero Torres Quevedo, 1, 48013 Bilbao, Spain

Abstract

Digital Twins (DTs) are increasingly employed in manufacturing to support simulation, monitoring, and control tasks, but their use in dimensional metrology requires explicit traceability and uncertainty information. This work develops a traceable DT for robot-based 3D inspection by integrating an industrial articulated robot with a laser-line triangulation sensor. The methodology combines robot kinematic identification, optical-sensor characterization, sensor-to-robot referencing, and a machine-readable representation of the calibrated metrological state. Uncertainties associated with the calibrated parameters are propagated through the complete measurement chain using a Monte Carlo method aligned with the Guide to the Expression of Uncertainty in Measurement (GUM). Validation combines a CMM-characterized four-sphere artifact and a geo-metrically complex part. For the complex part, two complementary cross-validation routes are considered: dense-surface comparison against a calibrated Triple Scan reference and feature-level comparison against CMM/VCMM reference values and task-specific uncertainties over 67 evaluated characteristics. The results support the use of the DT to generate uncertainty-enriched point clouds while also showing that feature-dependent systematic differences are not fully represented by global point-cloud statistics. The current validation is restricted to the environmental conditions and short-term stability of the experimental campaign; thermal drift and long-term stability are not included in the present model. The proposed framework therefore provides a basis for traceable, uncertainty-aware robot-based inspection and for subsequent industrial qualification under variable operating conditions.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.