Skip to Content
  • Proceeding Paper
  • Open Access

3 April 2026

10 Pages

Data-Driven Long Short-Term Memory Framework for Servo System Modeling and Optimization †

,
,
and
1
Department of Mechanical Design Engineering, National Formosa University, Yunlin 632301, Taiwan
2
Smart Machine and Intelligent Manufacturing Research Center, National Formosa University, Yunlin 632301, Taiwan
*
Author to whom correspondence should be addressed.
†
Presented at the 7th Eurasia Conference on IoT, Communication and Engineering 2025 (ECICE 2025), Yunlin, Taiwan, 14–16 November 2025.

Abstract

A novel data-driven modeling framework is developed for servo control using Long Short-Term Memory (LSTM) networks. The framework employs an LSTM model to directly map interpolation commands and feedback signals, such as velocity, acceleration, and jerk, to tracking errors. By adopting end-to-end architecture, the method bypasses complex sequential procedures, including system identification and friction modeling, significantly reducing development time and modeling complexity. Experimental results demonstrate that the LSTM model accurately predicts servo tracking behavior and enables rapid performance evaluation and parameter optimization without performing time-consuming trajectory testing. The proposed framework offers a practical and efficient alternative to traditional model-based techniques in precision motion control.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.