Skip to Content
InfrastructuresInfrastructures
  • Article
  • Open Access

6 September 2026

30 Pages

Integration of Renewable Energy Sources with Hybrid Power Quality Conditioners in Co-Phase Traction Systems for Electric Railways

,
,
,
,
and
1
School of Railway Engineering, Iran University of Science and Technology, Tehran 13114-16846, Iran
2
Department of Energy, Politecnico di Milano, 20156 Milan, Italy
3
School of Electrical Engineering, Iran University of Science and Technology, Tehran 16846-13114, Iran
*
Authors to whom correspondence should be addressed.

Abstract

The increasing demand for electrified rail transportation has intensified power quality (PQ) challenges, including harmonics, voltage imbalance, and low power factor (PF). These issues have driven the development of advanced traction power supply systems, particularly co-phase configurations, to improve power quality, enhance grid-connected stability, and strengthen the operational resilience of railway power infrastructure. This paper proposes a co-phase power supply system for high-speed railways that facilitates high-speed train operation by integrating power quality compensation technologies while reducing the required number of neutral sections by half, thereby improving the continuity and robustness of traction power delivery. To address PQ issues, a capacitive-coupled hybrid power quality conditioner (HPQC) incorporating renewable energy sources (RESs) into its DC link is introduced. Given the highly dynamic and time-varying nature of railway loads, a sliding mode control (SMC)-based robust control method is developed based on the state space model of the co-phase power supply system and the HPQC to provide a stable and rapid response to load variations and operational disturbances. The effectiveness and real-time implementation capability of the proposed approach are validated through real-time control hardware-in-the-loop (CHIL) simulations. Results from MATLAB/Simulink simulations and real-time CHIL testing demonstrate substantial harmonic reduction, improved power factor, reduced negative-sequence currents, and enhanced overall system efficiency. These outcomes confirm the suitability of the proposed system for modern high-speed railway applications and highlight its contribution to resilient traction power supply systems capable of maintaining reliable operation under highly variable loading conditions.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.