Skip to Content
You are currently on the new version of our website. Access the old version .
  • Protocol
  • Open Access

3 March 2025

12 Pages

A Validation Protocol for an Instrumented Wheel: A Comparison with a Dual-Roller Handrim Wheelchair Ergometer

,
,
,
,
,
,
,
and
1
Laboratoire J-AP2S, Université de Toulon, 83130 La Garde, France
2
Laboratoire HIPE, Université Aix-Marseille, 13385 Marseille Cedex, France
*
Authors to whom correspondence should be addressed.
This article belongs to the Special Issue Methods on Sport Biomechanics

Abstract

Measuring the propulsion performance of sport wheelchairs in ecological conditions remains complex due to variations inherent in real-world practice. This study aims to develop a validation protocol for an instrumented wheel designed to measure propulsion power under ecological conditions. The wheel’s precision was compared to that of the Lode Esseda roller ergometer, the gold standard for measuring the force exerted on both the left and right hands. Tests were conducted at three speeds (1, 2, and 3 m/s) on a multisport wheelchair. Results show a strong correlation between the two systems, confirmed by a repeated measures ANOVA test (p > 0.05) and a root mean square error (RMSE < 5%). Bland–Altman plots reveal good agreement despite discrepancies observed at high speeds, potentially due to mechanical limits. The proposed protocol validates the instrumented wheel and highlights the importance of multi-speed evaluation to ensure valid measurements in ecological conditions.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.