Skip to Content
FluidsFluids
  • Article
  • Open Access

21 November 2026

30 Pages

A Multi-Compartment Mass Exchange Model for Sloshing Prediction in Partially Filled Rectangular Tanks

,
and
1
Department of Civil, Architectural and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Napoli, Italy
2
Department of Industrial Engineering, University of Naples Federico II, Via Claudio 21, 80125 Napoli, Italy
3
Department of Civil, Building and Environmental Engineering, University of Naples Federico II, Via Claudio 21, 80125 Napoli, Italy
*
Author to whom correspondence should be addressed.
Fluids2026, 11(12), 301;https://doi.org/10.3390/fluids11120301 
(registering DOI)
This article belongs to the Section Mathematical and Computational Fluid Mechanics

Abstract

This work develops and calibrates a generalized multi-compartment Mass Exchange model for predicting liquid sloshing in partially filled rectangular tanks. Starting from the classical two-compartment formulation, a generalized framework based on an arbitrary number of communicating compartments is introduced. The model incorporates dynamic phase-lag filtering to capture delayed fluid response and static amplitude modulation effects. The model is calibrated on (N,τ) and compared against experimental data from Liu and Lin and Gao across three filling regimes (low, intermediate, and high) under resonant, near-resonant, and off-resonant excitation conditions. The investigation reveals a counter-intuitive finding: increasing discretization does not monotonically improve prediction accuracy. Instead, within the calibrated cases considered here, the optimal compartment number is primarily associated with the filling ratio, whereas the optimal relaxation time varies with the excitation condition. Each validation case is simulated in less than 0.2 s of wall-clock time on a laptop computer, whereas CPU times of the order of an hour are reported in the literature for full CFD simulations.

Article Metrics

Citations

Article Access Statistics

Article metric data becomes available approximately 24 hours after publication online.