Processes, Volume 13, Issue 4

Radioactive metal oxides are highly radioactive, hygroscopic spent fuel reprocessing products generally stored in container-sealed dry storage. During the storage process of metal oxides, a large amount of heat is generated due to radioactive decay,...

Many bearing fault diagnosis methods often struggle to balance between adequate feature extraction and lightweight property, which makes it somewhat difficult to fulfill the accuracy and efficiency required for practical applications. To address this...

The dynamic characteristics of liquid with high viscosity impact on stagnant packing are investigated by a computational fluid dynamics (CFD) method. The three-dimensional model, employing the volume-of-fluid (VOF) approach, simulates the evolution o...

Overcoming the oxidation stability of biodiesel has been a significant challenge, especially after an extended storage period. To test a major factor affecting biodiesel quality, eight different conditions consisting of water at a concentration of 50...

This study investigates a dynamic regulation strategy for intelligent gas drainage negative pressure using a comprehensive approach involving numerical simulations, intelligent algorithms, and field experiments. In the numerical simulation component,...

This study investigates the effect of nanoscale zero-valent iron (NZVI) and sediment microbial fuel cells (SMFCs) on the three typical heavy metals’ (Pb, Cr and As) removal and stabilization. Results showed that the combined use of NZVI and SMF...

Oil-in-water emulsions (O/W emulsions) are generally used to lubricate the cold rolling process of low-carbon steel. In addition to the obvious advantages of efficient lubrication and cooling of the process, there are also some disadvantages, mainly...

Shale gas development has made significant contributions to the increase in natural gas production capacity in recent years, particularly in promoting the transformation of the energy structure and enhancing energy autonomy. However, with the deepeni...

Complex systems often face significant challenges in both efficiency and performance when making long-term degradation predictions. To address these issues, this paper proposes a predictive architecture based on multi-output sparse probabilistic mode...

Microbial electrolysis cells (MECs) represent a pioneering technology for sustainable hydrogen production by leveraging bioelectrochemical processes. This study investigates the performance of a single-chamber cathodic MEC, where a cation exchange me...