Reviewer Board (59)

Members of the reviewer board are selected from all Processes reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.

Dr. Ali Athab Al-kinani
Department of Pharmacy, School of Life Sciences, Pharmacy and Chemistry, Kingston upon Thames, KT1 2EE, United Kingdom
Interests: Ophthalmic drug delivery, ocular drug delivery, 3D printing, Nanotechnology, Pharmaceutical analysis, Biological evaluation of formulation, Drug Delivery and Formulation, polymeric films
Dr. Julia Alvarez-Malmagro
CSIC - Instituto de Catálisis y Petroleoquímica (ICP), Madrid, Spain
Interests: biomimetic membrane; biosensor; polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS); atr-seiras; Adsorption; gold electrodes; membrane-bound enzymes
Dr. Agata Antoniewska
Institute of Human Nutrition Sciences, Faculty of Human Nutrition, Chair of Catering Technology and Food Chemistry, Warsaw University of Life Sciences (WULS-SGGW), Nowoursynowska st.159c, 02-776 Warsaw, Poland
Interests: GC/MS, SPME, GC, volatile compounds, fatty acids, antioxidative potential, antyradical activity, confectionary products, polyphenols, dairy products, fruits
Dr. Andrea Arsiccio
University of California, Santa Barbara
Interests: freeze drying, freezing, proteins, molecular dynamics
Dr. Krzysztof Bernacki
Department of Electronics, Electrical Engineering and Microelectronics, Silesian University of Technology, Akademicka 16, 44-100, Gliwice, Poland
Interests: power electronics, electromagnetic compatibility, control system, properties of magnetic materials, power conversion systems, precision signal measurement, data acquisition system
Dr. Cataldo De Blasio
Åbo Akademi University, Vaasa, Finland
Interests: Chemical Reaction Engineering, Supercritical Water Gasification, Biofuels Production, Process Design, Transport Phenomena
Dr. Paolo Blecich
Faculty of Engineering, University of Rijeka, 51000 Rijeka, Croatia
Interests: Thermodynamics; Heat and mass transfer; Heat Exchangers; Energy Efficiency; Building energy analysis; Renewable Energy; Energy conversion and management
Dr. Selim Bozkurt
Institute of Cardiovascular Science, University College London, London, WC1E 6BT, UK
Interests: Medical devices; biomechanics; simulation; medical device testing; cardiovascular system; artificial organs; left ventricular assist devices; artificial heart valves; craniosynostosis; paediatrics
Dr. Rocio Canovas Martinez
Postdoctoral researcher at AXES Group, Bioscience Engineering Department, University of Antwerp, Groenenborgerlaan 171, 2020 Antwerp, Belgium
Interests: electrochemical sensors; nanomaterials; electrochemistry; biosensors; microfluidics; screen-printed electrodes; paper-based sensors; wearable sensors; immunosensors
Dr. Fabrizio Di Caprio
Chemistry Department, University of Rome La Sapienza, 00185 Rome, Italy
Interests: bioprocesses; Biotechnology; Biochemical Engineering; microalgae; biomolecule extraction; wastewater treatment; Adsorption; metal removal
Dr. Mohand Djeziri
LIS-Lab, Aix Marseille University, Marseille 13007, France
Interests: Fault diagnosis; failure prognosis; Remaining Useful Life; PHM; modeling; simulation; Data-driven approaches; model-based approaches
Dr. Grzegorz Dzido
Department of Chemical and Process Engineering, Silesian University of Technology, Gliwice, Poland
Interests: microwave assisted synthesis; heat transfer enhancement with nanofluids; nanowires fabrication and application
Dr. Mansoore Esmaili
University of Alberta, Edmonton, Alberta, Canada
Interests: Membrane Biochemistry, Lipid nanodiscs, membrane proteins, biomembrane mimetics
Dr. Alexey Fomin
Mechanical Engineering Research Institute of the Russian Academy of Sciences (IMASH RAS), Moscow, 101990, Russia
Interests: Mechanism, machine, manipulator, robotics, kinematics, dynamics, computer-aided design (CAD), simulation, optimization, control, advanced manufacturing, machine elements
Dr. Martina Srajer Gajdosik
Department of Chemistry, University of J.J. Strossmayer in Osijek
Interests: proteomics; foodborne pathogens; cancerogenesis; protein separation
Dr. Monica Gumulya
Occupation, Environment and Safety School of Public Health, Curtin University, Perth, Australia
Interests: cfd; multiphase flow; turbulence; rheology; process safety; loss prevention
Dr. Nils Haneklaus
Td Lab Sustainable Mineral Resources, Danube University Krems, Krems, 3500, Austria
Interests: phosphate rock, rare earth elements, uranium, solar calcination, green hydrogen, synthetic fuels, biomass-to-liquid, 3D printing and diffusion bonding
Dr. Md Emdadul Haque
Dan F. Smith Dept. of Chemical Engineering, Lamar University, Beaumont, TX 77710, USA
Interests: Process Modeling; dynamic simulation; process control; APC/DMC; process optimization
Dr. Arash Helmi
Eindhoven University of Technology, Department of Chemical Engineering and Chemistry, Inorganic Membranes and Membrane Reactors Research Group, Room 1.49, Helix-west, Eindhoven, Netherlands
Interests: reactor engineering, transport phenomena, fluid mechanics and membrane technology
Dr. Cheng-Maw Ho
Department of Surgery, National Taiwan University Hospital, Taipei 100225, Taiwan
Interests: liver, surgery, transplantation, regeneration, cancer
Dr. Anna Ilnicka
Faculty of Chemistry, Nicolaus Copernicus University, Gagarina 7, 87-100 Torun, Poland
Interests: carbon, graphene, carbon foam, hybrid carbon material, carbon nanotubes, porosity, mesoporous carbon, nitrogen-rich carbon, electrocatalyst, metal-free catalyst, Zn-air battery
Dr. Mirela Ivančić Šantek
University of Zagreb,Faculty of Food Technology and Biotechnology, Pierottijeva 6, 10 000-HR Zagreb, Croatia
Interests: biofuels, microalgae, lignocellulose, cellulase, biochemical engineering, bioprocess kinetics, sustainable bioprocesses
Dr. Marzena Iwaniszyn
Institute of Chemical Engineering, Polish Academy of Sciences, Bałtycka 5, 44-100 Gliwice, Poland
Interests: heat transfer; Mass Transfer; flow resistance; monolith; foam; open-cell structure; wire mesh; structured reactor; catalytic combustion; cfd modeling
Dr. Hossein Jahromi
Biosystems Engineering Department, Center for Bioenergy and Bioproducts, Auburn University, Auburn, AL 36849, USA
Interests: Chemical Engineering; heterogeneous catalysis; Thermochemical processes; Renewable Energy; lignocellulosic biomass; pyrolysis; Gasification Hydrotreatment / Hydrodeoxygenation; Hydrothermal liquefaction; biofuels; transesterification; biodiesel; biomass; Catalyst Characterization; Lignin depolymerization; bio-lubricants; bio-products
Dr. Jolanta Jaskowska
Faculty of Chemical Engineering and Technology, Cracow University of Technology, 24 Warszawska St., 31-155, Cracow, POLAND
Interests: organic chemistry, synthesis of bioactive compounds; synthesis in the presence of microwave radiation; synthesis in the presence of ultrasound; Mechanochemistry; new methods of drug synthesis; new CNS drugs; new compounds with antibacterial activity; new compounds with anti-cancer activity
Dr. Victorien Jeux
Sorbonne Universités, ESCOM/UTC, EA 4297 TIMR, 1 allée du réseau Jean-Marie Buckmaster, 60200 Compiègne, France
Interests: Organic chemistry; pi-conjugated systems; polymers; photovoltaic; ionic liquids; micro waves activation and biomass transformation
Dr. Guozhao Ji
School of Environmental Science and Technology, Dalian University of Technology, Dalian, Liaoning, China
Interests: Computational Fluid Dynamics; Solid waste pyrolysis kinetics; Organic waste gasification; Silica membrane for gas separation
Prof. Myung Kyo Kim
Department of Management, Kansas State University, Manhattan, Kansas, 66506, USA
Interests: process management, operations management, and statistical methods
Dr. Abdollah Koolivand
University of Maryland
Interests: mathematical modeling, dynamic simulation, optimization, and process control of chemical processes; complex fluid interfaces, transport phenomena, advanced reaction kinetics with applications in polymerization systems; microfluidic systems, reactors; batch and continuous manufacturing of pharmaceutical processes
Dr. Edmund Kozieł
Szkoła Główna Gospodarstwa Wiejskiego, Warsaw, Poland
Interests: bioinformatics, medicine, molecular biology; plant biology; plantpathology; plant-viruses bioinformatics; protein; structure modeling
Dr. Izabela Krupińska
University of Zielona Góra, Faculty of Civil Engineering, Architecture and Environmental Engineering; Institute of Environmental Engineering, 15 Prof. Z. Szafrana St, 65-516 Zielona Góra, Poland
Interests: Water quality and treatment; Coagulation; Treatment of groundwater with a high amount of organic substances; Environmental Chemistry
Dr. Noureddine Lebaz
Claude Bernard Lyon-1 University, 43 boulevard du 11 Novembre 1918, 69100 Villeurbanne, France
Interests: population balance modelling, emulsions, double emulsions, static mixers, crystallization, precipitation
Dr. Dongheon Lee
Department of biomedical engineering, Duke University, USA
Interests: systems biology, multiscale modeling of biological systems, intracellular signaling pathways
Dr. Stefanos Leontopoulos
Department of Agrotechnology, Laboratory of food and biosystems engineering, University of Thessaly, Larissa, 41110, Greece
Interests: Antioxidants; crop protection; plant pathogens; biological agents
Dr. Pawel Madejski
AGH University of Science and Technology in Kraków
Interests: Computational Fluid Dynamics; engineering thermodynamics; modeling and simulation; Thermal Power Plants; Steam Boilers and Heat Exchangers; thermal engineering; Thermodynamic modeling; Thermofluids Systems; transport in porous media
Dr. Oscar Malvar Vidal
Instituto de Micro y Nanotecnología-CNM-CSIC, Calle Isaac Newton, 8, Tres Cantos, 28760-Madrid, Spain
Interests: nanotechnology; nanomechanical spectrometry; biosensors; silicon nanowires; suspended microchannel resonators; optical transduction methods
Dr. Filippo Marchelli
Università degli Studi di Genova | UNIGE · Dipartimento di Ingegneria civile, chimica e ambientale (DICCA)
Interests: fluidization, cfd-dem simulations, granular materials, biomass thermochemical conversion, gasification
Prof. Arkadiusz Moskal
Department of Integrated Processes Engineering, Warsaw University of Technology
Interests: Aerosol mechanics, aerosol filtration, transport and deposition of aerosol particles in human breathing system, drug delivery using inhalations
Dr. Jaewook Myung
Civil and Environmental Engineering, KAIST, Daejeon, South Korea
Interests: biogas, bioplastics, environmental biotechnology, resource recovery, wastewater, solid waste, bioelectricity, environmental electrochemistry
Dr. Ho Namgung
Department of Maritime Transportation System, Mokpo National Maritime University, Mokpo, 58628, Korea
Interests: maritime transportation system; collision risk assessment; collision avoidance; optimal route generatioin; fuzzy inference system; artificial intelligent
Dr. Marilena Nicolae
Petroleum-Gas University of Ploiesti, Department of Petroleum Processing Engineering and Environmental Protection, Faculty of Petroleum Processing and Petrochemistry, Ploiesti, Romania
Interests: Chemical Engineering, Process Engineering, Environmental Engineering, Phase Equilibrium, Liquid-liquid extraction
Dr. Nikolaos Nikolaidis
Sector of Chemical Technology and Industrial Chemistry, Aristotle University of Thessaloniki, Thessaloniki, 54124, Greece
Interests: colour chemistry; dyeing; printing digital and conventional; natural dyes
Dr. Idelfonso Nogueira
Laboratory of Separation and Reaction Engineering (LSRE), Department of Chemical, Faculty of Engineering of the University of Porto (FEUP), Porto, Portugal
Interests: Cyclic Adsorption Separation and Reaction; artificial intelligence; deep learning; advanced process control; Processes Optimization
Dr. Mikolaj Oettingen
AGH University of Science and Technology, Faculty of Energy and Fuels, al. Mickiewicza 30, 30-059, Krakow, Poland
Interests: Energy engineering, nuclear engineering, nuclear fuel cycle, reactors, numerical simulations, high performance computing, Monte Carlo methods, nuclear materials, dosimetry, radiation, thorium
Dr. Herie Park
Division of Electrical and Biomedical Engineering, Hanyang University, Seoul 04763, Korea
Interests: Process and system modeling; simulation; optimization and control; Heat and mass transfer; Energy Conversion; Electrical discharge; Opto-electronics
Dr. Thomas Paterson
Department of Automatic Control and Systems Engineering, University of Sheffield, Sheffield S10 2TN, UK
Interests: neural biomaterials; bioelectronics; neuroprosthetics; biomaterials; bone biomaterials; bone tissue engineering; electrospinning; additive manufacturing
Dr. Victor Petrov
University of Michigan
Interests: experimental and computational fluid dynamics (CFD), with main focus on nuclear power plant applications
Dr. Lichota Piotr
Institute of Aeronautics and Applied mechanics. Warsaw University of Technology
Interests: aerospace; flight dynamics; control and system identification
Dr. Ashiqur X Rahman
Center for Midstream Management and Science, Lamar University, Texas, USA
Interests: nanomaterials; Nanobiotechnology; bioprocessing; biosynthesis; microalgae; bioreactors; bio-applications; microwave synthesis; water treatment; wastewater treatment
Prof. Dr. Marilyn Rayner
Department of Food Technology, Engineering and Nutrition, Lund University, Box 117, 221 00 LUND, Sweden
Interests: food engineering; Chemical Process Engineering; Bioprocess Technology; Physical Chemistry; Sustainable processing; emulsions; plant proteins; Drying
Dr. Maria João Regufe
Associate Laboratory LSRE-LCM. Laboratory of Separation and Reaction Engineering (LSRE), Department of Chemical, Faculty of Engineering of the University of Porto (FEUP), Porto, Portugal
Interests: Cyclic Adsorption Separation Processes; Gas-phase adsorption; adsorbents; 3D-printing; co2 capture; Membranes
Dr. Arslan Saleem
School of Mechanical Engineering, Kyungpook National University, Buk-gu, Daegu,41566, South Korea
Interests: heat transfer; thermal-hydraulic performance; performance enhancement; nanofluid; heat sinks; condensers; evaporators; fin and tube heat exchanger; micro-channel compact heat exchangers; wind turbines; aerodynamics; horizontal axis wind turbines; tip clearance; ducted wind turbines; buoyant airborne wind turbines; high-altitude wind turbines
Dr. Alicia Bayon Sandoval
School of Engineering of Matter, Transport and Energy Arizona State University
Interests: thermochemical cycles, hydrogen production, thermal energy storage, concentrated solar energy, materials characterization, kinetic analysis, techno-economic assessments, thermodynamic analysis, system modelling
Dr. Jaber Shabanian
Department of Chemical Engineering, Process Engineering Advanced Research Lab, Polytechnique Montreal, C.P. 6079, succ. Centre-Ville, Montreal, QC, Canada H3C 3A7
Interests: Fluidization; High Temperature and Pressure Processes; Powder Technology; CO2 Reduction and Conversion; Process Electrification; Green and Sustainable Chemical Processes; CFD-DEM Simulation
Prof. Dr. Ivan Simeonov
Institute of microbiology “Stephan Angeloff”, Bulgarian Academy of Sciences, Acad. G. Bonchev str., bl 26, Sofia 1113, Bulgaria
Interests: anaerobic digestion; mathematical modeling; Automatic Control; Bioprocess Engineering; environmental engineering
Dr. Beata Szymczycha
Institute of Oceanology Polish Academy of Sciences,Powstańców Warszawy 55, 81-712 Sopot, Poland
Interests: Marine biogeochemistry; coastal processes; denitrification; Submarine groundwater discharge; C, N, P cycles
Dr. Łukasz Warguła
Institute of Machine Design, Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3, PL-60965 Poznan, Poland
Interests: emissions from internal combustion engines; innovative materials in the construction of machines; products of thermal decomposition and combustion in a fire
Dr. Marek Wróbel
Department of Mechanical Engineering and Agrophysics, University of Agriculture in Krakow, 30-149, Krakow, Poland
Interests: biomass; biofuels; torrefaction; quality of biofuels; pressure agglomeration
Dr. Maziar Yazdani
Faculty of Built Environment, University of New South Wales (UNSW) Australiadisabled, NSW 2052 Sydney, Australia
Interests: designing a smart disaster response system using integrated optimisation-simulation models to build future cities more resilience against disasters
Back to TopTop