Skip to Content
You are currently on the new version of our website. Access the old version .
ProcessesProcesses
  • Article
  • Open Access

30 December 2024

20 Pages

The Numerical Simulation Study on the Heat Transfer Mechanism in Heavy Oil Reservoirs During In-Situ Combustion

,
,
,
,
and
1
Department of Petroleum Engineering, Liaoning Petrochemical University, Fushun 113001, China
2
PetroChina Sichuan Marketing Company, Chengdu 610015, China
3
Oil and Gas Gathering and Transportation Company, Petrochina Liaohe Oilfield Company, Panjin 124010, China
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Flow Mechanisms and Enhanced Oil Recovery

Abstract

The escalating energy demand has prompted nations to prioritize the development of high-viscosity and challenging-to-extract heavy and extra-heavy oil reserves. Consequently, the technique of in-situ combustion in oil reservoirs by injecting air to ignite heavy oil resources, leveraging the generated heat to enhance recovery rates, is a particularly critical extraction method. However, simulation studies of in-situ combustion techniques are still primarily conducted at a macroscopic level. Therefore, conducting more detailed numerical simulation studies holds significant importance. This paper establishes a mathematical model for heat transfer within reservoirs during in-situ combustion, thoroughly investigating the effects of inlet temperature, injection pressure, injection duration, and porosity on the heat transfer processes inside the reservoir. The research demonstrates that the reservoir’s internal temperature gradually rises as the injection duration increases. Additionally, porosity (an increase from 0.1 to 0.3 enhances the heat propagation rate by 15%) and injection pressure (an increase from 5 MPa to 8 MPa boosts the heat propagation rate by 25%) significantly affect the heat transfer rate.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.