July 2023 - 168 articles
Chrome-plated plates, also known as tin-free plates (TFS), are the latest substrates for coating plates. The coating plate cannot be separated from the TFS during the stamping and extension process, and the interface layer of the TFS coating plate ca...
Al-Si/7.5 wt.%Y2O3 coatings were prepared on Mg alloy with laser cladding to enhance the wear and corrosion resistance of substrate. The influence of laser power on the microstructure and properties of the coating were discussed. The results uncovere...
Cadmium is a common heavy metal that can cause serious harm to human health, even in trace amounts. Therefore, it is of great significance to develop environmentally friendly, inexpensive, and readily available adsorbent materials with high selectivi...
In the present study, the ability for novel carbon microspheres (CMs) derived from date palm (Phoenix dactylifera) biomass using a hydrothermal carbonization (HTC) process and activated using phosphoric acid to remove methylene blue dye was investiga...
Nanoparticles are of great interest for water treatment as they remove a significant portion of water contaminants. In analogy to these emerging practices, the present work investigated the feasibility of using silica nanoparticles (SiO2-NPs) to remo...
Electrochemical impedance spectroscopy (EIS) is a widely used method for monitoring coatings because it can be done in situ and causes little damage to the coating. However, interpreting the impedance data from coatings in order to determine the stat...
Porous TiO2 thin films were prepared via electrochemical anodization of commercial-grade titanium foils in baths containing variable amounts of ethylene glycol. X-Ray diffraction, scanning electron microscopy, and UV/visible spectroscopy were employe...
Titanium oxides and their alloys are widely used in medical applications because of their biocompatibility. However, they are characterized by their low resistance to corrosion. The HaP + TiO2 nanocomposites’ coating was applied in different ex...
The known ferrocenyl-containing silicone materials have redox activity and electrical conductivity at the level of antistatic materials, but they are incapable of self-healing due to their irreversible cross-linking, which significantly reduces their...
There has been some research on jet electrolytic processing at home and abroad, and the phenomenon of discharge during the process has been reported, but there has been little research on the mode of jet electrolysis with the aid of discharge. A jet...
of 17
Get Alerted
Add your email address to receive forthcoming issues of this journal.
