The authors were not aware of errors made in the proofreading phase, and, hence, wish to make the following corrections to this paper [1].
Figure 3.
Comparative XRD patterns of ferrite matrices with different FE inclusion ratios. Diameter of holes: S–0.25 mm, M–0.4 mm, L–0.6 mm.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Tumarkin, A.; Tyurnina, N.; Tyurnina, Z.; Sinelshchikova, O.; Drozdovsky, A.; Gagarin, A.; Sapego, E.; Karamov, A.; Bogdan, A. Composite Metamaterial: Ferrite Matrix with Ferroelectric Inclusions. Coatings 2023, 13, 117. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).