Skip to Content
BuildingsBuildings
  • Review
  • Open Access

19 November 2026

19 Pages

Buckling Behavior and Design Approaches for Steel Square Hollow Section Columns: A Narrative Review

and
Instituto Superior de Engenharia do Porto, Universidade Técnica do Porto, R. Dr. António Bernardino de Almeida, 4249-015 Porto, Portugal
*
Author to whom correspondence should be addressed.
This article belongs to the Section Building Structures

Abstract

Steel square hollow section (SHS) columns may fail by local wall buckling, global flexural buckling, or interactions between these mechanisms. This narrative review examines the relationship between instability mechanisms, experimental evidence, numerical modeling, and resistance assessment for steel SHS columns under compression. Particular attention is given to the distinction between cross-section and member slenderness, the influence of fabrication, residual stresses and geometric imperfections, and the transferability of findings among conventional, high-strength and stainless steels. Eurocode-based effective-section methods and the Direct Strength Method (DSM) are discussed as resistance-prediction approaches, while finite element analysis is considered as a modeling framework whose reliability depends on validation and input assumptions. Evidence for perforated members and elevated-temperature conditions is addressed separately to avoid extrapolation beyond the investigated configurations. A bibliometric analysis of publications within the 2000–2026 observation window provides a descriptive overview of publication patterns, sources and research topics. The technical synthesis highlights the importance of traceable experimental datasets, transparent modeling assumptions and consistent resistance comparisons. A qualitative assessment framework is proposed to distinguish directly applicable evidence from contextual findings and to identify domains requiring further verification before conclusions concerning design recalibration can be drawn.

Article Metrics

Citations

Article Access Statistics

Article metric data becomes available approximately 24 hours after publication online.