Skip to Content
BuildingsBuildings
  • Article
  • Open Access

17 November 2026

26 Pages

Hydration Microstructure Three-Dimensional Modeling and Mechanical Performance of Slag-Based Geopolymers

,
,
,
,
,
,
and
1
College of Architecture and Material Engineering, Hubei University of Education, Wuhan 430205, China
2
School of Civil engineering, Hebei University of Engineering, Handan 056038, China
3
Faculty of Materials Science and Chemistry, China University of Geosciences, Wuhan 430074, China
4
Zhengzhou Institute of Multipurpose Utilization of Mineral Resources, Chinese Academy of Geological Sciences, Zhengzhou 450006, China

Abstract

Aiming to combat the shortage of existing pavement repair materials and the current situation in the field of transport pavements, finding a high-quality, environmentally friendly, fast-setting and -hardening, high-strength and excellent-durability pavement repair material is an urgent issue that needs to be addressed immediately. In this research, based on the dynamic characterization of the early hydration of geopolymer, a microstructural three-dimensional model of a slag-based geopolymer with fast consolidation and high early strength was established using HYMOSTRUC, revealing its hydration reaction mechanism and characterizing its early microstructural evolution. The three-dimensional model of the hydration microstructure showed that with an increase in reaction time, the slag particles gradually dissolved, and the alkali-activated gel continuously accumulated and filled the original pores; the simulation revealed that alkali-activated gel gradually accumulates and forms a network structure, which causes the slag-based geopolymer to densify gradually. By optimizing the mix ratio, we explored the characterization of microstructural evolution and the developmental patterns of the mechanical performance of the composite-modified slag-based geopolymer, and we comprehensively demonstrated the patterns of the influence of material composition and hydration microstructure on mechanical performance. The optimum mix reached a 28 d compressive strength of 96.9 MPa; composite addition of 10%SF + 10%MK increased the 3/7/28 d compressive strength by 11.02/21.14/13.25 MPa and reduced the 28 d autogenous shrinkage from 1.6% to 0.8%.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.