Next Article in Journal
Microstructure Evolution and Mechanical Properties of Titanium/Alumina Brazed Joints for Medical Implants
Previous Article in Journal
Transformation of Inclusions in Solid GCr15 Bearing Steels During Heat Treatment
Previous Article in Special Issue
Electromagnetic Forces in Continuous Casting of Steel Slabs
Article Menu
Issue 6 (June) cover image

Export Article

Open AccessEditorial

Continuous Casting

Department of Materials Science and Engineering, The Royal Institute of Technology (KTH), Brinellvägen 23, 100 44 Stockholm, Sweden
Department of Mathematics and Statistics, University of Limerick, Limerick V94 T9PX, Ireland
Metals 2019, 9(6), 643;
Received: 29 May 2019 / Accepted: 31 May 2019 / Published: 3 June 2019
(This article belongs to the Special Issue Continuous Casting)
PDF [726 KB, uploaded 3 June 2019]
Note: In lieu of an abstract, this is an excerpt from the first page.


Continuous casting is a process whereby molten metal is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in finishing mills; it is the most frequently used process to cast not only steel, but also aluminum and copper alloys [...] View Full-Text

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Share & Cite This Article

MDPI and ACS Style

Vynnycky, M. Continuous Casting. Metals 2019, 9, 643.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics



[Return to top]
Metals EISSN 2075-4701 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top