Manufacturing Processes for Metallic Materials

Yu, Chao; Xiao, Hong

doi:10.3390/met15111203

Open AccessEditorial

Manufacturing Processes for Metallic Materials

by

Chao Yu

and

Hong Xiao

^*

National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, China

^*

Author to whom correspondence should be addressed.

Metals 2025, 15(11), 1203; https://doi.org/10.3390/met15111203

Submission received: 26 September 2025 / Accepted: 14 October 2025 / Published: 29 October 2025

(This article belongs to the Special Issue Manufacturing Processes of Metallic Materials)

Download Versions Notes

Excerpt

Note: In lieu of an abstract, this is an excerpt from the first page.

As the global manufacturing industry transitions toward high-value-added and low-carbon development, metal material manufacturing processes are undergoing systemic transformations [...]

Share and Cite

MDPI and ACS Style

Yu, C.; Xiao, H. Manufacturing Processes for Metallic Materials. Metals 2025, 15, 1203. https://doi.org/10.3390/met15111203

AMA Style

Yu C, Xiao H. Manufacturing Processes for Metallic Materials. Metals. 2025; 15(11):1203. https://doi.org/10.3390/met15111203

Chicago/Turabian Style

Yu, Chao, and Hong Xiao. 2025. "Manufacturing Processes for Metallic Materials" Metals 15, no. 11: 1203. https://doi.org/10.3390/met15111203

APA Style

Yu, C., & Xiao, H. (2025). Manufacturing Processes for Metallic Materials. Metals, 15(11), 1203. https://doi.org/10.3390/met15111203

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Manufacturing Processes for Metallic Materials

Excerpt

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI