Next Article in Journal
Investigation on Optical Absorption and Reflection of Carbon Nanotubes Mixed Copper Composites for Laser Sintering Process Improvement
Previous Article in Journal
18Ni300 Maraging Steel Lattice Structures Fabricated via Laser Powder Bed Fusion—Mechanical Behavior and Gas Permeability
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Metals
Volume 13
Issue 12
10.3390/met13121983
metals-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Fragmentation and Branch Elimination of Primary α′ Martensite in Additively Manufactured Ti-6Al-4V Alloy

by
Mansur Ahmed
1,*,
Fionnan McNamara
2,
Greg Duggan
3,
Charles Tomonto
2,
Garret E. O’Donnell
1 and
Rocco Lupoi
1
1
Department of Mechanical, Manufacturing & Biomedical Engineering, Trinity College Dublin, The University of Dublin, D02 PN40 Dublin, Ireland
2
3D Printing Centre of Excellence, Johnson & Johnson Services Inc., Miami, FL 33126, USA
3
DePuy Synthes, Loughbeg, Ringaskiddy, Co., P43 ED82 Cork, Ireland
*
Author to whom correspondence should be addressed.
Metals 2023, 13(12), 1983; https://doi.org/10.3390/met13121983
Submission received: 26 September 2023 / Revised: 27 November 2023 / Accepted: 4 December 2023 / Published: 6 December 2023
(This article belongs to the Section Additive Manufacturing)
Browse Figures
Versions Notes

Abstract

Fragmentation and branch elimination are generally noticed in the conventionally processed Ti-6Al-4V. Such a key morphological change produces a positive change in certain mechanical properties. We, for the first time, observe fragmentation and branch elimination of the primary α′ martensite in additively manufactured as-built Ti-6Al-4V and the effect of scan speed on these is studied. Nanovoids inside and on the surface of the primary α′ martensite are assumed to be the starting points of the fragmentation and branch elimination, respectively. At a lower scan speed (250 mm/s) a relatively shorter branch length than that of a higher scan speed (500 mm/s) is observed. Such change in the morphology of primary α′ martensite has positively impacted hardness. This has been discussed in terms of additive manufacturing parameters. Such a fundamental morphological change will further help the understanding of laser powder bed fusion metal additive manufacturing. The hardness of the samples is measured and correlated with the fragmentation of the primary α′ martensite.
Keywords: additive manufacturing; Ti-6Al-4V; primary α′ martensite; fragmentation; branch elimination; laser scan speed additive manufacturing; Ti-6Al-4V; primary α′ martensite; fragmentation; branch elimination; laser scan speed

Share and Cite

MDPI and ACS Style

Ahmed, M.; McNamara, F.; Duggan, G.; Tomonto, C.; O’Donnell, G.E.; Lupoi, R. Fragmentation and Branch Elimination of Primary α′ Martensite in Additively Manufactured Ti-6Al-4V Alloy. Metals 2023, 13, 1983. https://doi.org/10.3390/met13121983

AMA Style

Ahmed M, McNamara F, Duggan G, Tomonto C, O’Donnell GE, Lupoi R. Fragmentation and Branch Elimination of Primary α′ Martensite in Additively Manufactured Ti-6Al-4V Alloy. Metals. 2023; 13(12):1983. https://doi.org/10.3390/met13121983

Chicago/Turabian Style

Ahmed, Mansur, Fionnan McNamara, Greg Duggan, Charles Tomonto, Garret E. O’Donnell, and Rocco Lupoi. 2023. "Fragmentation and Branch Elimination of Primary α′ Martensite in Additively Manufactured Ti-6Al-4V Alloy" Metals 13, no. 12: 1983. https://doi.org/10.3390/met13121983

APA Style

Ahmed, M., McNamara, F., Duggan, G., Tomonto, C., O’Donnell, G. E., & Lupoi, R. (2023). Fragmentation and Branch Elimination of Primary α′ Martensite in Additively Manufactured Ti-6Al-4V Alloy. Metals, 13(12), 1983. https://doi.org/10.3390/met13121983

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop