Skip to Content
You are currently on the new version of our website. Access the old version .
MetalsMetals
  • Article
  • Open Access

24 September 2023

13 Pages

Impact of Aging Treatment on Microstructure and Performance of Al-Zn-Mg-Cu Alloy Thin Sheets

,
,
and
1
Luoyang Ship Material Research Institute, Luoyang 471039, China
2
Key Laboratory of Electomagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819, China
*
Author to whom correspondence should be addressed.
This article belongs to the Section Metal Casting, Forming and Heat Treatment

Abstract

Al-Zn-Mg-Cu alloy, recognized for its heat-treatable and super-high strength, is a pivotal material for critical structural components in aviation. Consequently, grasping the intricate relationship between heat treatment processes and the microstructural characteristics and properties of the Al-Zn-Mg-Cu alloy is of paramount practical significance. This study encompasses a spectrum of heat treatment methodologies, delving into the diverse effects of distinct aging treatments on the microstructure and performance of thin Al-Zn-Mg-Cu alloy sheets. The findings illuminate that short natural aging treatments bestow heightened strength and hardness upon the alloy, albeit at the expense of ductility. Nevertheless, the alloy retains commendable malleability, enabling significant cold deformation. In contrast, artificial aging markedly elevates the alloy’s strength and hardness, albeit concurrently inducing a precipitous decline in ductility, thereby attenuating the alloy’s cold formability.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.