Skip to Content
You are currently on the new version of our website. Access the old version .
WaterWater
  • Article
  • Open Access

31 March 2022

17 Pages

Distribution Characteristics and Source Analysis of Microplastics in Urban Freshwater Lakes: A Case Study in Songshan Lake of Dongguan, China

,
,
,
,
,
,
,
and
1
Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, China
2
South China Institute of Environmental Science, Ministry of Ecology and Environment, Guangzhou 510535, China
3
Guangdong Provincial Key Laboratory of Water Quality Improvement and Ecological Restoration for Watersheds, Institute of Environmental and Ecological Engineering, Guangdong University of Technology, Guangzhou 510006, China
4
Key Laboratory of Tropical Marine Bio-Resources and Ecology, South China Sea Institute of Oceanology, Chinese Academy of Sciences, Guangzhou 510301, China

Abstract

Current studies on microplastic pollution mainly focus on marine systems. However, few studies have investigated microplastics in an urban lake. This research intends to use an urban lake (Songshan Lake) as an example to explore the pollution characteristics of microplastics and use the principal component as well as the heat map analysis to discuss the relationships between different shapes of microplastics. According to this study, the average abundance of microplastics in the surface water and surface sediments of Songshan Lake were, respectively, 2.29 ± 0.98 items/m3 and 244 ± 121 items/kg; thin films were the major microplastics in both media; transparent this type of color has the most microplastic content. The particle size of microplastics was mainly 0.18–0.6 mm (43.3%) in surface water and 1–2 mm (48.3%) in surface sediments. The composition included five polymers: polyethylene (PE), polypropylene (PP), polypropylene–polyethylene copolymer (PP–PE copolymer), polystyrene (PS), and polyvinyl chloride (PVC), among which PE (47%) and PP (36%) were the main components. Principal component analysis (PCA) showed that there was a positive correlation among the four shapes of microplastics: films, fragments, foams, and fibers. The heat map analysis showed that the same category of shape distribution features may be similar for each sampling site.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.