Abstract
Poly(α-olefin) (PAO) drag reducers are widely used to lower the pumping energy of crude-oil and refined-product pipelines. To examine how comonomer side-chain length affects drag reduction at ultrahigh molecular weights, five PAOs were synthesized with a TiCl4/AlEt2Cl Ziegler–Natta catalyst: three copolymers (S1, C6/C12; S2, C6/C8; S3, C8/C10; polystyrene-equivalent Mw = 4.42, 4.32 and 3.81 × 106 g·mol−1) and two homopolymers (S4, C6; S5, C8; Mw = 7.8 and 3.3 × 105 g·mol−1). Drag reduction was measured at 20 ppm in 0# diesel on a flow loop, and the polymers were characterized by GPC, DSC, FTIR and solid-state NMR. All samples were amorphous (Tg = −56.9 to −60.8 °C). The copolymers outperformed the lower-molecular-weight homopolymers, and S2 gave the highest drag reduction (57.0 ± 0.3%), higher than S1 (51.8 ± 1.3%, p = 0.003) despite a similar Mw. For all five samples, drag reduction followed the order of the backbone degree of polymerization estimated from Mw and the feed composition. At a comparable Mw, comonomers with shorter side chains are therefore preferable, because more of the molar mass resides in the backbone.