Polymers, Volume 15, Issue 1

The development of reliable and effective functional materials that can be used in various technological fields and environmental conditions is one of the goals of modern nanotechnology. Heating elements’ manufacturing requires understanding the laws...

Creating stimulus-sensitive smart catalysts capable of decomposing organic dyes with high efficiency is a critical task in ecology. Combining the advantages of photoactive piezoelectric nanomaterials and ferroelectric polymers can effectively solve t...

The power transformer is vital to the reliability of the power grid which is most commonly insulated with Kraft paper and immersed in mineral oil, among which the aged state of the paper is mainly correlated to the operating life of the transformer....

Superparamagnetic Fe3O4 particles have been synthesized by solvothermal method, and a layer of dense silica sol polymer is coated on the surface prepared by sol-gel technique; then La(OH)3 covered the surface of silica sol polymer in an irregular sha...

Background: Different compositions of DSF/NaOH/IA-PAE/R. spp. composite particleboard phantoms were constructed. Methods: Photon attenuation characteristics were ascertained using gamma rays from 137Cs and 60Co. Absorbed doses at the location of an i...

Investigations into polymer composites are mainly focused on properties dependent on glass fiber reinforcement and particulate fillers. In the present study, the effect of the binder was examined. The specimens were produced with two types of epoxy r...

Microplastics have become a ubiquitous contaminant in the environment. The present study focuses on the identification, characterization, and quantification techniques for tracking microplastics. Due to their unique compositional structure, unambiguo...

Epoxy (EP) was copolymerized with polyamic acid (PAA, precursor of polyimide (PI)) with termanil monomers of (1) 4,4′-Oxydianiline (ODA) and (2) pyromellitic dianhydride (PMDA) individually to form (PI-O-EP) and (PI-P-EP) copolymers. The FTIR s...

Up to now, fiber-reinforced composites with thermoplastic matrix have seen limited fields of use in the structural scope due to their high viscosity in the molten state, which results in poor impregnability of the reinforcement, leading to mechanical...

One of the main advantages of fiber-reinforced polymer (FRP) composites is the ability to reduce their weight while they exhibit exceptional properties such as high strength, stiffness, and resistance to corrosion, and reduction in their lifetime mai...