Erratum: Design of Web-to-Web Spacing for the Reduced Pressure Drop and Effective Depth Filtration. Polymers 2020, 11, 1882

Sanghyun Roh; Kangsoo Park; Jooyoun Kim

doi:10.3390/polym12040938

,

and

¹

Department of Textiles, Merchandising and Fashion Design, Seoul National University, Seoul 08826, Korea

²

R&D Center, Satrec Initiative Co., Ltd., Daejeon 34054, Korea

³

Research Institute of Human Ecology, Seoul National University, Seoul 08826, Korea

^*

Author to whom correspondence should be addressed.

Polymers2020, 12(4), 938;https://doi.org/10.3390/polym12040938

This article belongs to the Special Issue Polymeric Materials for Filtration and Purification

Version Notes

Order Reprints

The authors wish to make a change to the published paper [1]. In the original manuscript, there is a mistake in the Equation (3). The corrected Equation (3) is presented below.

Quality factor (mm H_{2} O^{- 1}) = \frac{- \ln (% penetration / 100 %)}{pressure drop ({mm H}_{2} O)}

(3)

The authors apologize for any inconvenience caused, and this change does not affect the scientific results. The manuscript will be updated, and the original will remain online on the article webpage at https://www.mdpi.com/2073-4360/11/11/1822.

References

Roh, S.; Park, K.; Kim, J. Design of Web-to-Web Spacing for the Reduced Pressure Drop and Effective Depth Filtration. Polymers 2020, 11, 1822. [Google Scholar] [CrossRef] [PubMed]

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Erratum: Design of Web-to-Web Spacing for the Reduced Pressure Drop and Effective Depth Filtration. Polymers 2020, 11, 1882

References

Article Metrics

Citations

Article Access Statistics